Plating Equipment & Services

ColWear Vacuum Fused Wear Plates

Wall Colmonoy presents a superior wear plate with lifetime beyond traditional competitors in the marketplace. ColWear plates are produced using proprietary Colmonoy® nickel and Wallex® cobalt alloys, with optional tungsten carbide. Vacuum-furnace production techniques developed over decades have been used to improve the metallurgical properties of the alloy matrix.

NanoDiamond-enhanced Electroless Nickel Plating

Nanodiamond material specialist Carbodeon of Finland has worked with metal finishing specialist CCT Plating of Germany to develop a new NanoDiamond-enhanced electroless nickel plating with significantly improved performance in sliding applications. Electroless nickel coatings offer many advantages over other coating types, such as excellent corrosion and abrasion resistance, creating an even coating thickness over complex geometries and at relatively low cost, according to the company.

Machining

Industry News for Machining

+ click to show 100 more results
France-based metalworking fluids and lubricant supplier Motul acquired Chem Arrow Corp. Terms of the transaction were not disclosed.
Flex Machine Tools, an American manufacturer and provider of machine tool solutions worldwide for metal fabrication operations, will host an Open House Event at Flex headquarters in Wapakoneta, Ohio, on Thursday, Dec. 5, 2024, from 9:00 a.m. through 4:00 p.m.
Metal Supermarkets, a supplier of small-quantity metals, named the six winners of its 10th annual Metal My Way contest.
UNITED GRINDING Group has signed an agreement with Georg Fischer AG (GF) to acquire its GF Machining Solutions Division (GFMS) with the aim of strengthening its position in the market
Nidec Corporation plans to construct a technical center to exhibit a comprehensive lineup of its machine tools on Nidec Machine Tool Corporation’s premises in the city of Ritto, Shiga Prefecture.
Kentucky Peerless Distilling Co. announced the release of a premium barrel-finished bourbon; a bourbon that was featured on the Bourbon With The Editor podcast. Due to the nature of the barrels, the latest expression will be extremely limited and released in Kentucky only.
Mate Precision Technologies, a provider of workholding solutions, has earned its certification as a DMG MORI DMQP partner for its 52/96 workholding system.
Redex USA showcased its portfolio of high-performance drives for machine tool applications at IMTS.
Thordon Bearings is supplying multiple sets of grease-free bearings to completely replace old technology at the Otto Holden Generating Station on the Ottawa River in Ontario, Canada.
Mollart Machinery's production operations and field service support, previously based in Chessington, United Kingdom, will be based out of Bourn & Koch's facility in Rockford, Illinois.
FABTECH, a metal forming, fabricating, welding, and finishing event will occur in Orlando from October 15-17. This year’s special events, which are free to all attendees unless noted, will feature a dynamic lineup of industry leaders, innovators, and visionaries.
Industry expert Jeff Rizzie looks at the future of machining with "sensorized" tooling in educational session at the 2024 International Manufacturing Technology Show
The Swiss grinding experts from Tschudin are presenting what they say is a world first: a grinding machine with perfect heat transfer.
General Carbide Corp., a vertically integrated manufacturer of finished tooling, wear parts, and components for customers in more than two dozen market segments, held its Third Annual Career Signing Day event at which eight students from four local school districts signed letters of commitment for employment at the Greensburg, Pennsylvania, company.
Walter is bringing together its global presence and the high level technical expertise and know-how of lightweight machining specialist FMT (Frezite Metal Tooling), under the new brand.
Cutting tool supplier Sandvik Coromant hosted a Girls Take Over Tech open house to “inspire and educate young women and girls about exciting career opportunities in manufacturing.”
United Grinding North America recently added to its continental footprint with two new distribution partners and a new regional sales manager for the Cylindrical Division.
Unisig, a global manufacturer of deep-hole drilling machines, has commissioned two SSI Schafer Logimat vertical lift modules (VLM) into its parts warehouse that is integrated with Unisig’s enterprise resource planning (ERP) system.
Big Daishowa’s Tools for Schools program provided $23,300 in tooling certificates for local high schools, vocational schools and colleges.
United Grinding North America, a subsidiary of Swiss-based United Grinding Group, recently appointed Alonso Acevedo to the Managing Director position for its Mexico territory.
Professional machinists searching for technical assistance on the internet would do well to check out Machiningdoctor.com, a website launched in November 2020 by a mechanical engineer with more than 30 years in the industry. Erez Speiser, who spent much of his machining career working at Iscar headquarters in northern Israel, said he developed the Machiningdoctor.com website out of boredom during the COVID-19 pandemic.
Effective immediately, Platinum Tooling Technologies Inc., will be selling products from Tecnicrafts Industries, a manufacturer of collets and guide bushings for Swiss Type CNC Lathes.
Kennametal Inc. has partnered with the American Precision Museum (APM) in Windsor, Vermont, which is home to one of the largest collections of historically significant machine tools in the country.
The United Grinding Group strengthens its Southeast Asian footprint and establishes a subsidiary in Singapore.
Allied Machine and Engineering, a leading manufacturer of holemaking and finishing cutting tools for the metal cutting industry, celebrates 50 years of Wohlhaupter’s MultiBore, the world’s first modular boring system.
Seco Tools has taken a leap in its efforts to share knowledge about the many possibilities in machining by announcing a new partnership with Swemachinist, a well-known Instagram content creator.
Star SU, the marketing, sales and service affiliate of Star Cutter Company, has appointed  Bart Trublowski as its new service manager and project coordinator.
Dormer Pramet is offering free e-learnings on a wide variety of machining tools to provide expert knowledge and wisdom to customers world-wide.
InCompass, a platform company of TJM Capital Partners, has reached a definitive agreement to acquire Bridgeport Machine Tool Co.
ANCA Inc., a manufacturer of CNC grinding machines, is exhibiting at the Motion + Power Technology Expo from Oct. 17 to 19 at Huntington Place in Detroit.
For the second year in a row, customers that purchase Big Daishowa cutting tools, toolholders and workholding products will support local manufacturing training programs at the same time.
Jorgensen Conveyor and Filtration Solutions has named John Powalisz as its new director of sales.
Ceratizit USA, a manufacturer of standard and custom tooling for the metalworking industry, has enhanced its Midwest presence by hiring an engineer.
Lyndex-Nikken, manufacturer and provider of high-performance machine tool accessories, announces the promotion of two employees to regional sales managers.
ANCA has appointed Edmund Boland as general manager of ANCA CNC Machines. Boland is the son of ANCA co-founder Pat Boland and has a 15-year tenure at ANCA.
Do you know a grinder operator using an ANCA machine? The company, a global manufacturer of CNC grinding machines, has launched the Female Machinist Award to recognize the achievements of female machinists in the tool and cutter grinding industry.
Unisig, a global manufacturer of deep-hole drilling machines, has invested $1.5 million in state-of-the-art technology and equipment for the company’s newly constructed 5,000-square-foot fabrication department.
GF Machining Solutions has moved its North American parts warehouse operations to an airport-adjacent location in Indianapolis, Indiana, to enhance responsiveness to customers and more quickly deliver parts orders.
CNC time is expensive, and engineers always look to decrease machining time to improve productivity. Today’s operations managers need more skilled help and are strategizing to reduce cycle time, automate more processes and be more productive. 
Big Daishowa will exhibit at Eastec at the Eastern States Exposition (Booth 5252) in West Springfield, Mass., May 16-18. 
GF Machining Solutions and GF Piping Systems broke ground on their Apodaca, Mexico, joint headquarters late in 2019. Construction of the 75,000-square-foot facility is now complete, and company leaders are hosting a grand opening celebration May 3.
Advanced programming strategies and simulation can lead to the production of better composite parts, according to CGTech.
Star Cutter has added a Lasertec precision laser cutting machine to its portfolio of machining equipment at its Tool Reconditioning Center.
In tool grinding, all influencing parameters in the overall cutting chain must be perfectly coordinated. Cleaned coolants and lubricants are an important piece in the mosaic.
Fine boring, rough machining, large-diameter boring — no matter the type of application, it is key to get the most from boring tools. Hole-finishing applications, whether at a job shop or a high-production environment, require precision. Here are ways to get the most out of your boring tools.
Mastercam announced its 2022 Wildest Parts Competition winners. The Wildest Parts Competition is held each year to encourage student interest and participation in manufacturing.
Poly Crystalline Diamond (PCD) products are widely used in industry for their superior abrasion resistance and longevity when machining non-ferrous materials.
Big Daishowa issued nearly $30,000 in tooling certificates to high schools, vocational schools, colleges and universities through its Tools for Schools program.
Rollomatic Inc., a subsidiary of Rollomatic Holding Switzerland, has appointed Joe Kane as CEO of Rollomatic Inc.
Wohlhaupter, a manufacturer of precision boring tools, received an environmental seal for its commitment to sustainability.
What do tool and cutter grinders and buildings have in common? The importance of having a solid foundation.
After 24 years at the forefront of Mikron Tool, Markus Schnyder is retiring from his post but will still be available to the company in a consulting function. In October, Schnyder, head of the Swiss tool specialist, handed over management of the company to Elio Lupica.
The proud and once-booming trade of toolmaking has been challenged to find its place in a new century. Here’s how one mold and die shop is using machine tool technology to invest in the future of its employees and grow its business.
ANCA Americas in Wixom, MI, a manufacturer of CNC grinding machines, is scheduled to exhibit at Expo Manufactura, a trade show in Monterrey, Mexico, from Feb 7 - 9.
Using scanning sprays can achieve better detection of the workpiece location.
Jorgensen Conveyor and Filtration Solutions has entered into a partnership with Will-Fill, a manufacturer of fully automatic coolant monitoring and managing systems.
Sandvik Coromant and NAIT celebrate the renewal of a long-standing 15-year partnership through 2025.
Platinum Tooling now offers Rineck shrink-fit tooling and shrink-fit machine technology for customers in the United States and Mexico.
Rollomatic Inc., a subsidiary of Rollomatic Holding Switzerland, has appointed Jason Hodgin as regional sales manager for several key manufacturing areas in the Southeastern and Central United States.
David Ducsai has been named group customer service manager of North America for The Rollomatic Group.
The research and development team at Blaser Swisslube, a Swiss expert in metalworking fluids, set about planning and implementing an idea to capture a machining process, chip formation and the behavior of the metalworking fluid more precisely than ever before through photos and videos. The idea came about as part of a joint project with the renowned ETH Zurich.
Big Daishowa will donate a tooling certificate valued at 20 percent of every order from an NTMA member company to the buyer’s school of choice.
Increased flexibility and productivity were achieved thanks to a traveling column milling machine equipped with a universal milling head.
As shown at IMTS this month, only through the use of extremely clean grinding oils can high-quality tools be ground economically and reliably against increasingly tight tolerance requirements.
Moraine Park Technical College in West Bend, Wisconsin, and Siemens are working together to train workers in the manufacturing sector.
Rush Machinery hires an electrical technician who is a graduate of the Finger Lakes Technical Center.
Parting off and grooving are among the most important, but also among the most demanding turning operations. Many parameters determine the result and productivity of the process and production. In addition to the rigidity of the machine, feed rate, and cutting speed, the parting-off and grooving tool and its holder are decisive factors governing the quality and efficiency of the grooving operation and workpiece. 
Vecoplan supplies outstanding machine and plant technology for the economical processing of residual materials and waste for the purposes of material and thermal recycling. A new turning machine has cut machining time in half.
Long before a new car model hits the streets, you could already touch it at MT Technologies -– if everything were not so top secret. The model maker manufactures entire vehicles as a reference and test models made of aluminum for numerous OEMs.
Rollomatic Inc. in Mundelein, Ill., has appointed Brian Twohey as national sales manager for the United States and Canada. He will also join the Group Management Team at Rollomatic/Strausak North America.
Mate Precision Technologies will showcase its 52/96 workholding system at IMTS this September. Located in booth 432146, Mate will showcase the workholding systems for 3-, 4- and 5-axis machining centers.
The acquisition of Peterson Tool Company strengthens GWS capability in the arena of custom tooling for the screw machine industry and specialty turning applications.
Jorgensen Conveyor and Filtration Solutions will spotlight its new FlexFiltration line, including the company's new Flex G Series of modular filtration systems, in Booth 338164 at IMTS 2022. The systems feature pre-engineered modules that ensure flexible filtration configurations and add value to virtually any application.
At IMTS 2022, Ceratizit USA will highlight several tooling options, including the company’s new Dragonskin coating, multifunctional EcoCut tools, a four-flute solid carbide drill, and an in-process machine monitoring and optimization system.
Cutting Tool Engineering's July 2022 issue will focus on how shops can meet demand for stringent boring operations. Bores must be machined with micron accuracy and maintain critical tolerances in low- and high-volume manufacturing applications. New digital solutions in boring and machine tool systems are set to transform industrial production. To supplement this report online, CTE will address some of these solutions during its Ask The Experts webinar scheduled for 10 a.m. (CDT) on Wednesday, July 20th.
Rush Machinery has hired Doug Lewis as a new sales manager. He joins current sales manager Rob Robbins as the company continues to grow.
Every cutting insert experiences a drop in performance when approaching the end of its life cycle. If this condition goes undetected for any amount of time, part-machining performance, as well as part quality, may have already suffered.
Whether examining how tool selection impacts chips, how coolant plays a role in chip evacuation or looking at the size and shape of chips, chip formation says a lot about the application being run.
Allied Machine and Engineering has launched an online digital platform, Allied’s Interactive Experience.
ANCA recently launched "The ANCA Academy," a series of videos that cover a different technical topic each month. The second video in the series is called "Machine Basics: Starting Up Your Machine Before Grinding."
Precision Drive Systems (PDS), a global provider of precision motor spindles, expert support, and repair near Charlotte, NC, announced Doug Lawrence as its product manager and subject matter expert (SME) for its metalworking spindle repair business.
Transor Filter USA named Mark Baltyn to its sales team as a regional account executive.  Baltyn is a veteran of the machine tool field having spent more than 15 years with Hirschmann Engineering providing tooling solutions for a wide range of manufacturing.
Wohlhaupter Tooling and boring tools from Allied Machine are helping to preserve the Pampanito, a World War II submarine.
The right cleaning process ensures product quality and cost-effectiveness.
Effective complete machining of DAF camshafts for commercial vehicles is based on the sophisticated interplay between high performance high-performance linear motors, ultra-precise in-process measuring systems and easily accessible components. The Dutch truck manufacturer is extending its camshaft machining operations by adding the modular concept on the new platform 6.
How simultaneous high-current and high-frequency have positioned the ANCA EDG as the benchmark for PCD manufacture.
The acquisition of Carbide Tools Mfg. Inc (CTMI) further strengthens GWS capability and capacity in the arena of custom carbide round tooling. From porting tools and reamers to complex form tools and custom end mills, CTMI’s customer-driven mission marries perfectly with that of GWS.
On ANCA's new television show - the ANCA Academy - viewers can learn how to set up a collet adaptor, a fundamental skill that all operators need to grind accurate tools and maintain stability of batch grinding
Big Kaiser Precision Tooling Inc. plans to change its name to Big Daishowa Inc. effective Jan. 1.
Choose best-in-class cutting tools, tool holders and workholding products from Big Kaiser and support the National Robotics League (NRL) at the same time.
Rollomatic Inc., a subsidiary of Rollomatic Holding Switzerland, has formed a separate business unit within Rollomatic Inc. for the product range of laser cutting machines.
Rollomatic Inc., a subsidiary of Rollomatic Holding Switzerland, has appointed Jeremy David as its group applications manager for both the Rollomatic and the Strausak brands.
Kris Zellmann has been named national sales manager for Strausak Inc.
Manufacturers can achieve 90% machine use reduction with power skiving.
Niels Bredick, senior solutions specialist at Sandvik Coromant, is a member of a winning team of the 2020 Henry Ford Technology Award (HFTA) for development and implementation of the Torque Monitoring of Gear Machining Process.
At every stage of manufacturing, there is an opportunity for automation. Unfortunately, many manufactures often let perceived barriers keep them from implementing complete machine or process automation. With this mindset, they end up limiting their productivity by automating only one or two aspects of the process or not automating at all.
At the U.S. transmission plant of a global automotive manufacturing group, component inspection times have been reduced by half or more by upgrading the company’s coordinate measuring machines (CMMs) to incorporate 5-axis scanning technology in addition to touch probing.
Counterfeiting is a challenging problem for bearing manufacturers. Laser marking is one way to overcome this problem.
Expert spindle rebuilders that pay attention to the details and communicate throughout the process offer fast, reliable rebuilds that last.
GF Machining Solutions showcased at Eastec 2021 equipment for mold and die and job-shop applications that the company says can increase production and reduce energy consumption.

Articles on Machining

+ click to show 100 more results
Author: William Leventon
Column: Feature Article
Published:
Author:
Column: Feature Article
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Jeffrey A. Badger, Ph.D.
Column: Ask The Grinding Doc
Published:
Author: Brandt Taylor
Column: Machinist's Corner Column
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Jeffrey A. Badger, Ph.D.
Column: Ask the Grinding Doc Column
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Dennis Spaeth
Column: Lead Angle Column
Published:
Author: EMUGE-FRANKEN USA
Column: Feature Article
Published:
Author: EMUGE-FRANKEN USA
Column: Feature Article
Published:
Author: Jeffrey A. Badger, Ph.D.
Column: Ask the Grinding Doc Column
Published:
Author: William Leventon
Column: Machine Technology Column
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Alan Richter
Column: Feature Article
Published:
Author: Jeffrey A. Badger, Ph.D.
Column: Ask the Grinding Doc Column
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Jeffrey A. Badger, Ph.D.
Column: Ask the Grinding Doc Column
Published:
Author: CTE Staff
Column: Productive Times
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author:
Column: Get With The Program Column
Published:
Author: Brandt Taylor
Column: Machinist's Corner Column
Published:
Author:
Column: Feature Article
Published:
Author:
Column: Productive Times
Published:
Author: Brandt Taylor
Column: Machinist's Corner Column
Published:
Author: Jeffrey A. Badger, Ph.D.
Column: Ask the Grinding Doc Column
Published:
Author:
Column: Feature Article
Published:
Author: Alan Richter
Column: Feature Article
Published:
Author: Jim Hranica
Column: Get With The Program Column
Published:
Author: CTE Staff
Column: Productive Times
Published:
Author: William Leventon
Column: Machine Technology Column
Published:
Author: William Leventon
Column: Machine Technology Column
Published:
Author: Heidi Bethel
Column: Feature Article
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author:
Column: Productive Times
Published:
Author: Brandt Taylor
Column: Machinist's Corner Column
Published:
Author: Brandt Taylor
Column: Machinist's Corner Column
Published:
Author: Frank Burke
Column: Feature Article
Published:
Author: Connor Benedict
Column: Feature Article
Published:
Author:
Column: Productive Times
Published:
Author: Alan Richter
Column: Feature Article
Published:
Author: Jeffrey A. Badger, Ph.D.
Column: Ask the Grinding Doc Column
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Brandt Taylor
Column: Manager's Desk Column
Published:
Author: Alan Richter
Column: Feature Article
Published:
Author: CTE Staff
Column: Productive Times
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: William Leventon
Column: Feature Article
Published:
Author: Jeffrey A. Badger, Ph.D.
Column: Ask the Grinding Doc Column
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Connor Benedict
Column: Feature Article
Published:
Author: Connor Benedict
Column: Feature Article
Published:
Author: Jeffrey A. Badger, Ph.D.
Column: Ask the Grinding Doc Column
Published:
Author: Brandt Taylor
Column: Machinist's Corner Column
Published:
Author: Alan Richter
Column: Feature Article
Published:
Author: William Leventon
Column: Feature Article
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Alan Richter
Column: Feature Article
Published:
Author: Alan Richter
Column: Feature Article
Published:
Author: Alan Richter
Column: Feature Article
Published:
Author: William Leventon
Column: Machine Technology Column
Published:
Author: William Leventon
Column: Machine Technology Column
Published:
Author: William Leventon
Column: Machine Technology Column
Published:
Author:
Column: Productive Times
Published:
Author: Jeffrey A. Badger, Ph.D.
Column: Ask the Grinding Doc Column
Published:
Author: Alan Richter
Column: Feature Article
Published:
Author: Brandt Taylor
Column: Machinist's Corner Column
Published:
Author: Brandt Taylor
Column: Machinist's Corner Column
Published:
Author: William Leventon
Column: Feature Article
Published:
Author: William Leventon
Column: Feature Article
Published:
Author: William Leventon
Column: Machine Technology Column
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Frank Burke
Column: Feature Article
Published:
Author: William Leventon
Column: Feature Article
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Alan Richter
Column: Feature Article
Published:
Author: Jesse Trinque
Column: Get With The Program Column
Published:
Author: Jesse Trinque
Column: Get With The Program Column
Published:
Author: William Leventon
Column: Machine Technology Column
Published:
Author: CTE Staff
Column: Productive Times
Published:
Author: CTE Staff
Column: Productive Times
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author: Jeffrey A. Badger, Ph.D.
Column: Ask the Grinding Doc Column
Published:
Author: Yesenia Duran
Column: Feature Article
Published:
Author: Yesenia Duran
Column: Feature Article
Published:
Author: Brandt Taylor
Column: Machinist's Corner Column
Published:
Author: William Leventon
Column: Feature Article
Published:
Author: William Leventon
Column: Machine Technology Column
Published:
Author: Alan Richter
Column: Feature Article
Published:
Author: Alan Richter
Column: Feature Article
Published:
Author: Alan Richter
Column: Feature Article
Published:
Author: Alan Richter
Column: Feature Article
Published:
Author: Christopher Tate
Column: Feature Article
Published:
Author:
Column: Feature Article
Published:
Author:
Column: Feature Article
Published:

Videos on Machining

+ click to show 100 more results
Scott Walrath showcases the OptiLine series of End Mills, offering four, five, six, and seven flute configurations tailored for diverse machining applications. These tools are available in sizes ranging from 0.005 inches to 2 inches, providing exceptional versatility and precision. Kenny Green introduces the MaxiMill 211 DC, an innovative 3D-printed coolant-through cutter designed to enhance cooling efficiency. Ideal for machining high-temperature alloys, titanium, and nickel, the MaxiMill 211 DC ensures superior performance in demanding applications.
Jason Taylor, Mazak's Product Manager, highlights the EZ Loader 20, a compact automation system featuring a collaborative robot with a 20 kg payload capacity. Designed for efficient loading and unloading, it integrates a vision sensor for precise operations and supports high-mix workpiece production. He also presents the VC-EZ 20X vertical machining center, equipped with a CAT 40 spindle capable of 12,000 RPM, ideal for precise and versatile milling tasks. Additionally, he discusses Mazak's advanced five-axis solutions, emphasizing their expansive travel capacity and spindle performance, suitable for complex machining applications​.
Jason Taylor, Mazak's Product Manager, highlights the EZ Loader 20, a compact automation system featuring a collaborative robot with a 20 kg payload capacity. Designed for efficient loading and unloading, it integrates a vision sensor for precise operations and supports high-mix workpiece production. He also presents the VC-EZ 20X vertical machining center, equipped with a CAT 40 spindle capable of 12,000 RPM, ideal for precise and versatile milling tasks. Additionally, he discusses Mazak's advanced five-axis solutions, emphasizing their expansive travel capacity and spindle performance, suitable for complex machining applications​.
At noon CST Dec. 11, discover how Baker Industries, a leader in large-scale machining for aerospace, automotive, defense, and shipbuilding, is redefining heavy manufacturing. In this exclusive webinar, General Manager Brian Baker shares insights into their advanced machining capabilities, including Emco Mecof Powermill HP5 gantry machining centers, 3D printing innovations, and strategies to eliminate bottlenecks and ensure on-time delivery. Learn how Baker Industries handles massive components with precision, invests in redundancy for customer peace of mind, and maintains the highest quality standards. Join us to explore key trends, ask questions, and gain actionable insights into large-scale machining and heavy equipment manufacturing.
Step into the Vargus USA booth at IMTS 2024 to explore innovative threading solutions transforming the medical sector. Featuring advanced bone screws and dental implants, these products showcase Vargus’s commitment to precision and efficiency.
Mike Coffey, a field service engineer at Rush Machinery, showcases the RushCut, a PLC-controlled machine designed for efficient cutoffs. It features adjustable clamping, customizable work holding, and a direct coolant system for enhanced performance. The user-friendly touchscreen allows for easy programming, while safety features prevent operation with the door open. Coffey also presents the end profile grinder, emphasizing its programmable functions and convenient loading options.
Tapmatic Corporation, a family-owned manufacturer based in North Idaho, has specialized in tapping attachments since 1952. Their product lineup includes the self-reversing Drill-n-Tap 50, designed for both drilling and tapping operations, and various CNC tapping heads tailored for high-volume applications. Additionally, Tapmatic offers marking tools like the TapWriter® for dot peen marking and the ScribeWriter® for scribing, as well as innovative deburring solutions such as the DeBurr-Z floating tool holder. Their collaboration with O.M.G. Srl. enhances their product range, featuring digital angle heads and MOX series spindle speeders to improve machine performance.
In this episode of Bourbon with the Editor, host Dennis Spaeth explores the cutting-edge world of CNC machining with special guest William Nash, featuring live demos and in-depth discussions from IMTS 2024. To kick things off, Dennis raises a glass of Isaac Bowman Port Barrel Finished Bourbon—a small-batch spirit crafted with the same precision and dedication found in high-tech manufacturing. Finished in port wine barrels, this award-winning bourbon delivers a rich, complex flavor profile, making it the perfect pairing for a conversation on CNC’s intricate capabilities.
Arndt Hauger, innovation manager at Vollmer, introduces the VLaser 370 — a high-precision machine crafted for PCD tool production with a focus on the automotive and aerospace sectors. The VLaser utilizes a unique kinematic design that enables fast and efficient laser machining of complex profiles. It offers exceptional dimensional accuracy and is supported by a flexible loading system that accommodates various tool placements.
Martin Dillaman, global manager at Greenleaf Corp., presents innovative tooling solutions for hardened steel. Key highlights include the WG-600 ceramic insert, designed for high-speed, coolant-free operations, and the versatile Excelerator milling tools. Live demonstrations underscore the efficiency of ceramic inserts, cutting process times from 30 minutes to mere seconds — a game-changer for applications in the oil and gas sector. 
Designed for cross holes in both manual and CNC applications, Orbitool deburring tools from J.W. Done feature a flexible shank and protective disc, allowing for selective material removal at intersecting edges. J.W. Done General Manager Stanley Kroll demonstrates how Orbitool is shown to effectively deburr complex contours and surfaces, particularly for brass parts. Custom tools also are available.
Tungaloy-NTK Chief Technical Officer Kedar Bhagath shares insights on the company's advancements in turning technology, including its AddMultiTurn six-corner inserts for front turning, back turning, profiling and face turning. He next highlights the company's new grooving product, the AddForceCut, which features a self-clamping design. Bhagath also discussed the company's miniature cutting technology, ceramics innovations, drilling solutions like its DrillMeister product, and advancements in the company's milling technology, with a focus on high-feed solutions and unique clamping mechanisms.
Tungaloy-NTK Chief Technical Officer Kedar Bhagath shares insights on the company's advancements in turning technology, including its AddMultiTurn six-corner inserts for front turning, back turning, profiling and face turning. He next highlights the company's new grooving product, the AddForceCut, which features a self-clamping design. Bhagath also discussed the company's miniature cutting technology, ceramics innovations, drilling solutions like its DrillMeister product, and advancements in the company's milling technology, with a focus on high-feed solutions and unique clamping mechanisms.
CERATIZIT’s OptiLine high performance end mills are manufactured from the finest substrate with unparalleled tool geometry and superior Dragonskin coating. They are ideal for a wide range of milling applications.
Join Tod Petrik at the HAIMER booth at IMTS 2024 for an exclusive tour of HAIMER’s newest tools and technologies. In this video, Tod takes us through each featured product, sharing insights on innovations designed for precision, durability, and versatility in machining applications. From the HAIMER Mill Series to the powerful Panther Mill, get an insider look at how these tools are pushing the boundaries of high-performance machining. Ideal for anyone interested in cutting-edge manufacturing solutions and the latest in tool technology.
Join Aaron Remsing, Sales Manager at Star Cutter Group, as he presents the brand new FLX at IMTS 2024. The FLX is a versatile five-axis tool and cutter grinder designed for high-volume production of one-inch diameter tools up to eight inches in length. Discover the machine’s two spindle options, including a 15-kilowatt, 20-horsepower spindle for end mill and drill manufacturing, and explore its advanced automation package.
Welcome to the Mikron Tool booth at IMTS 2024! In this demo, we showcase NS Tool's advanced surface finishing on a bone plate. Join Vince Hensel as he guides you through the latest innovations. Watch to learn more about precision machining techniques and the future of surface finishing.
In this episode of Bourbon With The Editor, we welcome Vargus USA to discuss advanced medical screw machining techniques. We dive into three key demos, showcasing precision machining for bone screws, dental implants, and medical extenders. Tune in for expert insights into tooling and processes shaping the future of medical manufacturing!
Millstar's EIV5 Series is revitalizing conventional practices for the modern machine shop. The EIV5 provides a unique combination of radial grind, variable helix, variable pitch and radius preparation for maximum versatility and surgical precision. EIV5 offers exceptional performance with high temperature alloys like titanium, making it an ideal choice for diverse machining applications including medical and aerospace.
Join us for an insightful webinar featuring Genevieve Swiss Industries Inc., with expert Scott LaPrade, Applications Supervisor. Dive into the innovative world of rotary broaching and learn about the latest advancements and techniques revolutionizing polygon machining. Whether you're looking to enhance your existing skills or gain new insights into this specialized area, this webinar is a must-attend event for machining professionals seeking to stay at the forefront of their field.
Don’t miss our discussion with Vargus USA about their cutting-edge MilliPro product. This advanced solution for small diameter thread milling can revolutionize your threading operations. Tune in for an insightful discussion and discover how this technology can enhance your manufacturing processes!
Welcome to a special series of 'Bourbon with the Editor' where we sit down with the legendary Jeffrey Badger, also known as The Grinding Doc, celebrated for his groundbreaking contributions to grinding technology and his engaging approach. Join us as we explore Jeffrey's remarkable journey—from his early fascination with grinding to becoming a global authority in the field.
Experience maximum productivity and turning efficiency with Tungaloy’s TurnFeed on steel. Engineered with a unique cutting edge for high-feed machining, this tool boasts double clamping technology for unparalleled rigidity and performance. The WPMT-ML Trigon insert with ML chipbreaker minimizes cutting force, while producing thin, manageable chips. Perfect for a broad range of applications, from roughing to finishing, thanks to its high versatility and resistance to wear and chipping. Transform your machining process today.
Join us for an Ask CTE Contributors webinar led by industry veteran Tom Kowalski, Regional Manager for EMUGE-FRANKEN USA, when he provides invaluable insights on "Avoiding Tap Breakage with These Five Tips". Designed for manufacturers spanning all industries, this webinar will delve into the intricacies of tap selection, drilling considerations, and crucial decision-making that EMUGE-FRANKEN uses for optimizing thread quality and tool life – and avoiding the dreaded broken tap!
Register to watch the recorded webinar on-demand. Join Cutting Tool Engineering for a one-hour webinar based on this month’s cover story, “A Fluid Choice.” The article examines the options for high-pressure coolant when deep-hole drilling.
Take advantage of discounted pricing and special offers on all of our best-performing milling, grooving, turning, parting, threading, and drilling tools!
Take advantage of discounted pricing and special offers on all of our best-performing milling, grooving, turning, parting, threading, and drilling tools!
Take advantage of discounted pricing and special offers on all of our best-performing milling, grooving, turning, parting, threading, and drilling tools!
Take advantage of discounted pricing and special offers on all of our best-performing milling, grooving, turning, parting, threading, and drilling tools!
Sold by Germany-headquartered Chiron Group, the refrigerator-size Micro5 machining center is designed to machine small and delicate parts for industries like medical, jewelry, watchmaking and electronics. The five-axis machine  can handle workpiece sizes up to 50 mm x 50 mm x 50 mm.
The webinar, which is based on the "Tiny Drillers" feature published in the August issue of Cutting Tool Engineering magazine, delves deeper into the products and strategies recommended for deep-hole microdrilling by Kennametal Inc. and Sandvik Coromant Co. In addition, a representative from MAQ AB discussed the company's vibration-damped turning tool that is 8 mm in diameter, which was the subject of a sidebar to the main feature article in CTE's August issue.
Not all titanium is alike. Depending on whether it is pure titanium or alloyed titanium, the chip removing process behavior differs. For these challenges, Mikron Tool has developed drills tailored to specific titanium grades that can machine titanium safely — with higher cutting performance results, longer tool lives and excellent hole quality. The webinar, which is presented by Clive Komlenic, sales director, East, for Mikron Tool, addresses chip formation, torque, material properties, overheating and Mikron’s latest state-of-art drill series technologies aimed at machining titanium.
During Eastec 2023, Kevin Swint, territory sales representative for VEKTEK, highlighted the company's new Auto-Coupler device for automating the hydraulic connection from the power supply to a workholding fixture, as well as VEKTEK's Advanced Automation Workholding Pump.
Guhring Inc., which featured several product lines at its booth during Eastec 2023, reviewed the company's newest offerings for drills, endmills, thread mills, taps, grooving tools, and a tool management vending solution.
In addition to featuring its Cut F 600 wire EDMing machine and Mill S 200 U five-axis linear drive machine, GF Machining Solutions highlighted the micromachining capabilities of its Microlution product line.
Craig Fischer, plant manager for JM Performance Products Inc., highlighted some of the company's newer products, including BT30 retention knobs, that were on display at the company's booth during Eastec 2023.
CTE Publisher Dennis Spaeth asks MIKRON Tool's Clive Komlenic, sales director, East, about the company's new micro milling tool, the CrazyMill Cool Micro. The new cutter is said to answer their customer's desire for a micro tool that displayed a lot of the same characteristics as MIKRON's larger mills that start at 1 mm.
Martin Dillaman, global manager of engineering/applications for Greenleaf Corp., recaps and takes questions regarding "Making the Grade," a feature article published in the April 2023 issue of Cutting Tool Engineering magazine that discusses how the use of the right carbide inserts helps overcome any issues that might arise when rough turning steel.
Join Cutting Tool Engineering and UNISIG CEO Anthony Fettig for a 30-minute webinar based on an article in the March 2023 issue of CTE magazine that offers a detailed overview of what deep hole drilling entails.
Take advantage of discounted pricing and special offers on select tools across our milling, drilling, turning, and grooving lines. Boost productivity, simplify tool inventory, and decrease downtime with Tungaloy’s ADDForce accelerated lines. Headquartered in Japan, we provide our products to customers all over the world in automobile, construction, aerospace, medical, power generation, infrastructure, and heavy industries.
AddMultiTurn – Front turning, back turning, profiling, and face turning with ONE SINGLE TOOL. Tungaloy's 6-corner inserts with the company's ultra-secure Y-PRISM clamping design for high versatility, economy, and productivity. Available in 80° or 35° corner angle.
Kevin Bates, Mazak Corp.'s general manager, Midwest region, discusses the company's new line of SYNCREX Swiss-turning machines at IMTS 2022.
Cutting Tool Engineering's July 2022 issue will focus on how shops can meet demand for stringent boring operations. Bores must be machined with micron accuracy and maintain critical tolerances in low- and high-volume  manufacturing applications. To supplement this report online, CTE will address some of these solutions during its Ask The Experts webinar scheduled for 10 a.m. (CDT) on Wednesday, July 20th. The Ask The Experts panel will consist of Rigibore Inc. President Anthony Bassett and BIG DAISHOWA Inc. Senior Product Specialist Matt Tegelman. 
Marzel Neckien, president of W Machine Works, San Fernando, California, invested in smart machine monitoring from FactoryWiz that enabled the shop to collect raw machine data and better understand what was happening on their shop floor.
Rollomatic USA and Strausak featured two new tool grinding machines during its three-day open house held Nov. 9-11 at Rollomatic's Mundelein, Illinois, facility.
Rollomatic USA and Strausak featured two new tool grinding machines during its three-day open house held Nov. 9-11 at Rollomatic's Mundelein, Illinois, facility.
Rollomatic USA and Strausak featured two new tool grinding machines during its three-day open house held Nov. 9-11 at Rollomatic's Mundelein, Illinois, facility.
In addition to showing off the company's new AutoMarkX automated laser etching machine, ANCA CNC Machines President Russell Riddiford highlights new features of its FX7 Linear machine for medium to light manufacturing. 
In addition to showing off the company's new AutoMarkX automated laser etching machine, ANCA CNC Machines President Russell Riddiford highlights new features of its FX7 Linear machine for medium to light manufacturing. 
Marubeni Citizen-Cincom Inc. Applications Engineer James Sabatino visits with Cutting Tool Engineering Publisher Dennis Spaeth, who visited the company's booth during EASTEC 2021 to learn more about the Miyano BNE-MYY fixed headstock type CNC automatic lathe.
Gorilla Mill President and Owner Kevin Cranker offers Cutting Tool Engineering a quick tour of the company's booth at EASTEC 2021, highlighting two new Gorilla Mill lines: the Arsenal' lines during Cutting Tool Engineering's EASTEC 2021 booth visit. Cranker begins the tour by featuring the company's new Arsenal line of Picatinny cutters along with a new line of Lemur chamfering mills.
For Cutting Tool Engineering's EASTEC 2021 booth visit with Mikron Tool, Regional Sales Manager Clive Komlenic talks about the company's new CrazyMill Cool Plunge & Slot square and corner radius mill as well as its new line of small diameter micro mills (0.2 to 0.9 mm three-flute and 0.4 to 0.9 mm four-flute).
For Cutting Tool Engineering's EASTEC 2021 booth visit with Mikron Tool, Regional Sales Manager Clive Komlenic talks about the company's new CrazyMill Cool Plunge & Slot square and corner radius mill as well as its new line of small diameter micro mills (0.2 to 0.9 mm three-flute and 0.4 to 0.9 mm four-flute).
Cutting Tool Engineering's video booth visit with BIG DAISHOWA Inc. at EASTEC 2021 covers an array of the company's latest products.
Cutting Tool Engineering's video booth visit with BIG DAISHOWA Inc. at EASTEC 2021 covers an array of the company's latest products.
AutoMarkX is an automatic stand-alone laser marking station replacing manual and labour-intensive processes. It is AIMS compatible which means it could work in a fully automatic mode without human intervention, if required.
This short video showcases the new TURNPWR control as a workshop-oriented turning control that enables the user to program conventional machining operations right at the machine in an easy-to-use conversational programming language. It is designed for turning machine tools with up to two axes.
The DeBurr-Z is said to eliminate the need for tedious hand work by deburring parts quickly and consistently on a CNC machine.
Beckett Packaging manufactures and stocks a full range of Round Telescopic Plastic Tubes. Durable, reusable and resistant to moisture, this packaging will allow for storage of various tool lengths.
The CERATIZIT WTX-HFDS solid carbide drill with Dragonskin coating achieves new levels of quality, hole tolerance, and positioning accuracy, with low burr formation while entering and exiting the hole. The core stability of the drill is retained with optimum cooling via four internal spiral coolant holes making the drilling process safe and effective.
Sandvik Coromant offers a deep hole drilling strategy using its CoroDrill 861-GP and 861-GM drills in this brief video supplement to "A Happy Medium," a feature article in the October 2021 issue of Cutting Tool Engineering that delves into effectively drilling austempered ductile iron.
YG-1 USA's new FM10 PNMU face milling platform, which is featured in this brief video demonstration, combines multi-corner face milling performance with high-feed capabilities.
Designed for extreme drilling in steels, Guhring’s RT100 XF drill family delivers. The carbide grade developed for the RT100 XF balances hardness and toughness.
The ORBITOOL® deburring tool is designed for in-process deburring of crossholes. The flexible shank and protective ring enable a unique cutting action that automatically protects all critical surfaces, while selectively removing material only at the burred intersection edge.
Tri-V Tool and Manufacturing Co. doesn't turn down work or shy away from challenging parts. To meet customer demands, they’ve added more-sophisticated and advanced horizontal machining centers, an automated pallet system and multi-tasking part processing from Mazak.
Watch 2D Adaptive clearing paired with SwiftCARB's coolant through AV series Rampmill rip through aircraft grade aluminum @ 375 IPM on a Haas VF2-SS.  ALL of our tools are proudly made in the USA.
Tungaloy’s TungFeed-Blade is an extremely rigid modular blade series for grooving and parting applications. TungFeed-Blade consists of a triangular CHGP style modular blade with three insert pockets which holds a CHTBR/L robust style tool block. Intended for high feed grooving and parting, the TungFeed-Blade system extends insert life, improves surface finish, and part straightness, while significantly reducing cycle time.
Star Cutter’s NXT 5-axis Tool Grinder is a versatile 5-axis CNC machine, features a small footprint and a large grind zone. The machine can run small and large diameter wheels and is designed in a modular fashion that offers quick adaptation to application requirements.
Tungaloy’s TungFeed-Blade is an extremely rigid modular blade series for grooving and parting applications. TungFeed-Blade consists of a triangular CHGP style modular blade with three insert pockets which holds a CHTBR/L robust style tool block. Intended for high feed grooving and parting, the TungFeed-Blade system extends insert life, improves surface finish, and part straightness, while significantly reducing cycle time.
Two technologies, one machine: The new VOLLMER VHybrid 360 combines the strengths of an innovative grinding machine and a proven powerful erosion machine. Allowing you to switch between the two functions in no time! Efficient processing and powerful machining of carbide tools with diameters of up to 50 mm. 
Two technologies, one machine: The new VOLLMER VHybrid 360 combines the strengths of an innovative grinding machine and a proven powerful erosion machine. Allowing you to switch between the two functions in no time! Efficient processing and powerful machining of carbide tools with diameters of up to 50 mm. 
CNC Software Inc., Helical Solutions LLC and Makino Inc. — a software developer, cutting tool maker and machine builder, respectively — share the results of their joint R&D project that began with an email introducing a new high-efficiency six-flute endmill with a chipbreaker. This report is a video supplement to the Get With The Program column in the August 2021 issue of Cutting Tool Engineering magazine.
CNC Software Inc., Helical Solutions LLC and Makino Inc. — a software developer, cutting tool maker and machine builder, respectively — share the results of their joint R&D project that began with an email introducing a new high-efficiency six-flute endmill with a chipbreaker. This report is a video supplement to the Get With The Program column in the August 2021 issue of Cutting Tool Engineering magazine.
Cutting Tool Engineering recently organized and hosted a Question & Answer style webinar with industry experts from Walter AG and RobbJack Corp. exploring the difficulties associated with machining aluminum. Terry Iverson, President and CEO of Iverson & Company, a sales, service and precision machine tool rebuilding company, moderated the event. Our panelists included Jim Dale, Component Manager Aerospace, Walter AG, and Mike MacArthur, Vice President of Engineering, RobbJack Corp.
Tungaloy’s TungCut series of grooving and parting tools now offers TungFeed-Blade, an extremely rigid modular blade series for grooving and parting applications.
The new DB133 drills, with their 140° point geometry, are available in diameter range from 1/32-5/64 in. and 0.5 to 2.95 mm. Length to diameter ratios (L/D) of 5, 8 and 12 x Dc are standard.
The new DB133 drills, with their 140° point geometry, are available in diameter range from 1/32-5/64 in. and 0.5 to 2.95 mm. Length to diameter ratios (L/D) of 5, 8 and 12 x Dc are standard.
The Flex drills are available in steps of one hundredth millimeter for drilling depths of 50 x D, as well as the "shorter" lengths of 20 x D and 30 x D.
The Flex drills are available in steps of one hundredth millimeter for drilling depths of 50 x D, as well as the "shorter" lengths of 20 x D and 30 x D.
Video highlights the IMCO Streakers M2 Series, which includes the M223 second generation Streaker end mill for machining aluminum alloys and the M233 roughers that plow through aluminum alloys while using 20% less power. 
First Three-Laser-Diode Engraving Laser Head — The newest addition to our family of industrial cutting and engraving laser heads is arguably the most versatile engraving laser on the CNC market. Boasting a real 15 W of optical power as well as a novel design, this is the first compact CNC laser head that not only marks metal, but deep-engraves it.
First Three-Laser-Diode Engraving Laser Head — The newest addition to our family of industrial cutting and engraving laser heads is arguably the most versatile engraving laser on the CNC market. Boasting a real 15 W of optical power as well as a novel design, this is the first compact CNC laser head that not only marks metal, but deep-engraves it.
Join Zoller's tool inspection solutions experts, Werner Lueken & Matt Brothers, for a special edition of the ZOLLER75LIVE event series on May 19/20 as we unveil the latest ZOLLER Innovation in tool inspection — the »genius« — during a live broadcast from our North American Headquarters in Ann Arbor, Michigan.
At The Grinding Doc, we put together this short video with some of our more popular electron-microscope photos. Take a look. It might just change how you see grinding. 
Jeffrey Badger, Ph.D., discusses the grinding principles at work that cause chatter in the 106th episode of The Grinding Doc video series.
Renishaw supports all of its probing hardware with easy to use software that compliments the full potential of machine tool probing applications.
This three-minute video from Walther Trowal explains and demonstrates the company's vibratory mass finishing technology.
A Dormer-branded tool designed for stainless steel is the Force M drill, which has a micrograin carbide substrate and a multilayer TiAlN coating. The drill has an S-shape, modified four-facet, split-point geometry to reduce cutting pressure with honed corners and cutting edges so they do not chip when starting a hole.
Schwanog’s PWP broaching system reportedly can produce internal and external shapes, such as serrations, splines, hexagons and keyways, on CNC lathes with a c-axis. The system includes an insert ground to create the desired shape, a retaining screw and a steel toolholder.
Schwanog’s PWP broaching system reportedly can produce internal and external shapes, such as serrations, splines, hexagons and keyways, on CNC lathes with a c-axis. The system includes an insert ground to create the desired shape, a retaining screw and a steel toolholder.
After a long hiatus due to the COVID-19 pandemic, The Grinding Doc video series on Cutting Tool Engineering's website resumes with a special two-hour episode about Cylindrical Master 2020, an Excel program developed by Dr. Jeffrey Badger, aka The Grinding Doc.
As a pioneer in the industry, Tungaloy has three decades of know-how developing the most efficient solutions for High-Feed Milling. Feed the speed with Tungaloy!
This full slot milling demonstration from Sandvik Coromant focuses on pitch selection for maximum metal removal.
CTE and the RobbJack Corporation in November 2020 presented a webinar titled, "Tips to Improve Performance by 500% When Machining Medical Parts." Presented by Mike MacArthur, RobbJack's vice president of engineering, the webinar examines new cutting technologies and strategies that solve many of the difficulties experienced by shops machining many materials specific to medical machining, including cobalt-chrome, titanium, stainless steel, PEEK and many others.
Video demonstrates WTX-HFDS Solid Carbide Drills with applications including grey cast iron with spheroidal graphite and at tolerances of H7.
You are looking for a powerful, flexible, reliable, and rigid tool and cutter grinding machine with an easy-to-use control and a variety of available options, including part loading and tool changing automation.
You are looking for a powerful, flexible, reliable, and rigid tool and cutter grinding machine with an easy-to-use control and a variety of available options, including part loading and tool changing automation.
Abrasive Technology Inc. discusses how superabrasive grinding wheels and tools with electroplated bonds are able to maintain tight-tolerance forms, provide freer cutting, and hold form or profile from the first cut to the last. In addition, the tools can be stripped and replated.
Nachi America Inc. (Cutting Tools) features the Aqua Revo Oil Hole Drill series in a brief video that offers an overview of the endmill's oil-hole geometry, material and coating. Designed for shops that require high-efficiency machining, the Aqua Revo drill series reportedly will improve productivity and reduce costs. 
Tungaloy America Inc. demonstrates the hard turning capabilities of its T-CBN, AH8000 and LX11 insert grades in a two-minute video that runs through a series of turning operations. The video also provides recommendations for which insert grades to use for continuous, light interrupted and heavy interrupted turning applications.

Products for Machining

+ click to show 100 more results
The T93XM can profile with a standard 1A1 wheel and accommodates several grind styles including wheel profile, plunge, peel, in-feed and thru-feed grinding. The perimetric workholding, unique to TRU TECH, ensures part concentricity to eliminate shank runout without indicating. Ultra-precision accuracy is achieved through the 3-axis, fully programmable configuration with CNC variable speed spindle. Pick-N-Place™ software eases and shortens programming setup time. Several design features add stability and further support operator ergonomic considerations. Part sizes can be 3” (75mm) in diameter, up to 8” (200mm) in length.
With the ability to rapidly dial in runout with complete control, users spend less time tapping on the side of the tool and resetting tools and collets. Overall efficiency is increased, machining costs are lowered, and scrap is reduced with easyZERO.
The UltraTEC ultrasonic A25 creates a formation and dissolution/implosion of bubbles in water that release an intense energy during implosion. This is created by an ultra-high oscillation of 20kHz (20,000 oscillations per second) with an oscillation width of +/-80-120microns, which far exceeds the amplitude of ultrasonic cleaning, cutting and welding technologies.
XS Inline, the smallest integrated fiber laser marking head in the world at only 10 x 2.9 x 4.3-inches for its marking head. It’s very easy to integrate this class 4 laser in every production line process. Easy-to-use software and enhanced performance are key to increase 2.9’’ your traceability! Discover Tempo, the dot peen marking machine integrated to your production line. First available with a 30 x 60 marking window, this marking machine is compact, can be installed in three positions, is compatible with Ethernet IP and can mark three characters per second.
Through the online tool, customers can easily submit requests for volume manufacturing projects. The user-friendly interface allows them to upload their files and then enter details such as proposed production scheduling, lead times, quality requirements, design specifications, materials, accreditation needs and preferred processes. This streamlined approach triggers a rapid response from a dedicated project team, which paves the way for further discussions around customer project needs, and enabling customized quotes and solutions that perfectly align with their requirements.
With the 4-watt UV and green 10-watt marking lasers, the new V-Series offers higher performance and better precision than its predecessor models, but in a much more compact design. This allows for easy integration into existing production lines and more versatility in the design of production environments.
FISCHER USA Inc. has expanded its repair services and exchange programs to include third-party spindle brands in the North American market.
The MMC collet chuck is precision ground and pre-balanced to 30,000 RPM at G2.5 with runout accuracy of 3 microns at 4 times the diameter – ensuring accuracy and reliability during high-speed operations.
These bumpers are available in “off-the-shelf” sizes, as well as special cut to custom requirements. Bumpers are most often used in material handling, assembly and manufacturing operations to guide, stop and support parts as they are moved and transferred. Fairlane Products maintains a large inventory of products and they are an economical alternative in many applications to eliminate the need for custom engineered molded components.
Flexibility is a key feature of the tap grinding process on the TapX. The specially designed machine and powerful ToolRoom software ensure a vast range of tap types and sizes can be designed and manufactured in one set-up. Combine this with the benefits of quick changeover time and it's not hard to see how TapX can increase productivity and reduce lead times.
The FX7 ULTRA not only grinds tools faster than other machines, but also produces tools with both finer surface finishes and greater accuracy — which means superior tool performance and quality.
The AA3100 series is designed as a drop-in replacement for hydraulic or pneumatic actuators. These legacy approaches waste excess energy and floorspace required for compressors, while adding costly and complex mechanical components. In the case of pneumatics, they can leak and create messes on the plant floor. To simplify replacement of these devices, the AA3100 devices leverage an ISO 15552 flange size and bolting points on both sides as well as an external thread mount on the shaft end of the spindle to mount ball heads, clamping hooks or other common adapters.
The use of 8620 ensures that the components will work harden over time, rather than becoming brittle as is the case with the use 9310 alloy steel. Single point threading ensures that the threads are balanced (lead-in/lead-out at 180 degrees) which is very difficult to achieve when rolling threads.  Full depth is also attained for each thread. Because all machining is done with a single set-up, concentricity is achieved.
Two coolant through tools with top and bottom outlets for output pressure of up to 340 bars.
Significantly improves insert tool life. Quick, change fast and easy adapter indexing. User-friendly with a single clamping screw. No set-up time after blade or pocket indexing. Can be used next to the spindle or next to a shoulder as the square adapter and tool shank align with no protrusions. Economical adapters with 4 pockets for TANG-GRIP 2,3- and 4-mm width inserts.
Suitable for all TANG-GRIP inserts including high feed inserts. Designed for higher productivity.
The tables can be bolted together to meet varying length requirements. The legs are equipped with leveling pads that can be adjusted independently from 25 inches to 37 inches. The tables’ precision machined steel rollers have durable roller ball bearings to make movement fast and easy.
A key advantage of the CA115P/CA125P series is its expansive lineup of chipbreaker options covering everything from finishing to roughing, ensuring optimal performance and productivity across numerous applications. Kyocera is also introducing the new PMG chipbreaker design for optimal medium to roughing efficiency with lower resistance and protection against chip entanglement when machining steel.
The core components of the machine stayed the same. The spindle columns were repositioned to replace the gantry mechanism. This one change allowed for several previous components to be removed, making the machine more open and maintenance-friendly. The main change is that we have incorporated a Fanuc robot within the machine for the movement of parts.
The PR115S/PR120S series features Kyocera’s new MEGACOAT TOUGH HRSA proprietary coating technology, offering exceptional endurance and maximum tool life for machining heat-resistant super alloys (HRSA). The inserts consist of four distinct layers.
hydrostatically guided slides are wear-free and thus have an unlimited service life. The hydrostatically guided linear slide units are characterised by high reliability, long-term availability and low service costs. Since these properties exist independently of the service life, the machine end-customer can produce more effectively and economically in the long term.
Rollon´s TLS Series actuators´ unique combination of high stroke to closed length ratio, synchronized drive system, simple mounting, and minimal maintenance requirement empowers designers to easily optimize their machine footprint or floor layouts for a wide range of industrial equipment including CNC, part transfer, and assembly machinery.
Utilizing ANCA’s machine platforms with a robot cell, blanket grinding offers flexibility across a range of tool sizes and applications. Blanket grinding allows for full automation of tools of similar geometries, by consolidating all tool grinding processes into one single machine. A batch of complete finished tools can be produced without interruption directly from lengths of ground bar stock with no operator intervention.
With the synchro-use dual actuators, the two carriages move toward each other when the handle shaft is turned clockwise. The two carriages move away from each other when the handle shaft is turned counterclockwise. As with the standard linear actuators, they can be used with simple manual adjustments without complex processes of parts selection, design and assembly. The internal parts, as well, are protected from dust by an aluminum profile body and dustproof sheet.
The MOTIACT mechatronic gripper series is the ideal solution for performing precise, consistent, and accurately monitored gripping operations for moving parts, pallets, and chucks in and out of CNC machines and automated work cells. These first-in-class grippers are equipped with an incremental measuring system to guarantee adjusting gripping pressure, linear positioning, and speed control as standard features. All models feature a Profinet or I/O link interface to ensure seamless integration into existing systems.
The combination finishing machine is really two machines in one because it can handle a multitude of jobs that include contour part finishing, flat stock finishing, polishing, grinding and deburring—virtually any finishing operation. The belt arm adjusts vertically, horizontally and any position in-between.
The link between the physical gearbox and the digital world is established via a data matrix code (DMC), a 2D code on the gearbox nameplate. This can be scanned via smartphone or tablet, for example. Alternatively, access is possible via a web portal on the Neugart homepage (www.neugart.com).
WDS’ clevis fork brackets enable ISO 6432 actuators to connect and drive a host of machinery or devices. Available in 6 mm and 8 mm bracket pin sizes, three connection styles are available. The detent pull pin features a spring-loaded ball that secures the fastener, providing a high level of security, while the quick release pin enables easy fastening and removal.
The ultrashort pulse laser marks in the deepest, matt and non-reflective black without generating significant heat input on the workpiece. Even through further processing steps, such as passivation, the marking remains reliably legible and corrosion resistant. Due to the very short pulses down to the femtosecond range, in combination with high pulse energies, the system marks various stainless steels, titanium and a variety of plastics.
Easy setup is assured with the electronic type plate on the 1FL2 motor and one-button tunning in the S200 drive. The integrated brake resistor and integrated holding brake control add to the functions in the S200 servo-drive. High durability is designed in with the coated circuit boards (3C2) in the S200 and IP65 motors with metal connection solution. Built-in under-voltage protection is further provided.
SINAMICS S210 offers DC link coupling on 3-phase units for increased power efficiency on multi-axis applications. Corresponding SIMOTICS highly efficient synchronous motors feature high-resolution 22- or 26-bit absolute encoders, single or multi-turn. One-cable connectivity is standard and all motors and feature IP64, IP65, IP67 or IP69X protection. Easier setup and selection are assured with the integrated EMC filter and braking resistor.
Diatool does not limit the times a reamer can be reconditioned, providing an even longer service life of the reamer with no compromise in tool life or cutting quality. Offering standard deliveries of 4-6 weeks and cost savings of 40 percent over new, Diatool’s Reamer Reconditioning Service is ideal for machining operations struggling with long lead-times or non-responsive tooling vendors.
SINAMICS G220 is the first drive to join the Siemens Xcelerator portfolio, the Siemens-wide business platform for digital transformation. SINAMICS G220 drives are an integral part of the TIA Portal and feature a digital twin in Startdrive, the drives commissioning tool from Siemens. This allows the behavior of the drive to be tested and optimized before the hardware is available. SINAMICS G220 has an integrated web-server for commissioning which eliminates the need to install software or an app on a PC or mobile device. This saves time and makes drive setup very intuitive and extremely user-friendly.
QL2 features heavy duty, all steel body – treated with Jergens Mcoat for superior wear resistance and durability even in harsh environments. The system features a floating and opposing clamping wedge assembly (with sealed wedge bodies); an Acme threaded screw for increased strength and long life; O-ring lifters for positive separation of top tooling; and versatile standard mounting options. QL2 is Made in the U.S.A. and has a Jergens patented design.
Metal parts packaged in Eco-Corr Film® receive ongoing protection against salt, excessive humidity, condensation, moisture, and aggressive industrial atmospheres. In addition to serving as a physical barrier to the elements and inhibiting corrosion on metals in direct contact with the film, Eco-Corr Film® also contains Vapor phase Corrosion Inhibitors that vaporize and then condense on all accessible metal surfaces within the enclosed package to interrupt the corrosion reaction between metal, oxygen, and an electrolyte.
Dia-Strip and Dia-Sheet lapping and polishing film incorporates pure virgin diamond powders in their highest concentrated forms. This slows for maximum material strength, durability, and performance. The powders are first expertly graded for uniformity, and then held into place by a thin nickel. With this approach, 90% of the grains are left exposed for cutting, yet are unable to escape the film due to the strength of the bonding agent. This unique construction makes Dia-Sheets and Dia-Strips highly durable, yet also flexible, bendable, and formable. 
STUDER has brought two new cylindrical grinding machines to the North American market with the release of the S100 and S36. BLOHM continues its tradition of customer-centric surface and profile grinding innovation with the release of the PLANOMAT XT Essential. WALTER is focused on packing more tool grinding functionality into a compact space with the new HELITRONIC G200 and HELITRONIC MINI PLUS.
With the ANCA RFID (Radio Frequency Identification) regrinding solution, tools of various types and diameters and from different orders can be dynamically loaded, rather than having to sort them by diameter or customer as was previously necessary in mixed batches.
The Reliable Uberlight comes in black or white and 3 styles: with a convenient clamp mount to easily mount on any machinery or worktable, with a 7.75” base to prevent tipping, or a direct table mount, (black only, shown below. With its 26.5” silicone gooseneck and 270 degree rotational head the Reliable Uberlight  allows light precisely where needed with a  great hold. The 4.75” LED panel does not create glare or flickering and provides up to 60,000 hours of use and 240% more luminous efficiency.  All provided with a 6’ USB cord and adapter.
The bumpers, commonly identified as RB-516 come in a variety of mounting options such as tapped hex shoulder and threaded, stud mount, and steel plate mounted. They come in black neoprene, white nitrile, or colored urethane. Diameters sizes run from ¾ in. to 2 ¼ in. with metric sizes available from 19-57 mm.
Data from all gauges in the Q-Span System – including thread gauges, robotic calipers, LVDT probes, drop gauges, bore gauges, laser micrometers, vision system, 2D telecentric profilers, and more – is combined into one convenient output for statistical process control (SPC).  Data from any or all gauges can be used in real time for in-process decision making and process monitoring.  
During the rebuild process, AP&T technicians disassemble and thoroughly examine the press. They replace worn parts and outdated systems and components before reassembling the press and performing a test run and safety check. All exchanged parts are covered by AP&T's new-part warranty.
The cell has a 6-Axis FANUC M-10iD/12 Robot with 4.7' (1,441 mm) reach, capable of handling a maximum load of 26.5 lbs (12 kg). The GRC-R12 features a pneumatic single-or double-gripper system. The drawer feed system can have up to six drawers that can be unloaded and reloaded while the robot cell and machining center are in operation. With GROB’s unique machine design, excellent chip control inside the machining center allows for long periods of unmanned operation without faults. Offering high customizability, customers may select from capabilities such as a blowoff box, SPC drawer and an alignment station.
The Truing Parameters Calculator is the result of a 3-year collaboration between Rush Machinery, the International Grinding Institute, and Dr. Jeffrey Badger, the ‘Grinding Doc’. Rush Machinery commissioned the project that was later presented at the 2008 CIRP General Assembly in Tokyo by Dražumerič, Badger, Klement, and Krajnik titled “Truing of Diamond Wheels–Geometry, Kinematics and Removal Mechanisms,” published in the CIRP Annals, volume 57, pages 345-348.
DESTACO has designed its cobot tooling solutions for simplicity and ease of use with off-the-shelf availability via kits that feature all of the end-user selected accessories, along with the hardware and tools needed for installation, reducing the need to consult an application engineer. All of the tooling solutions are compatible with cobots that have an ISO 9409-1-50-4-M6 end-of-arm mounting pattern.  Blank robot and tool plates are offered for those who wish to use their own mounting patterns.
KBC Tools & Machinery is stocking Aircat pneumatic straight die grinders, extended die grinders, angle die grinders, impact wrenches, ratchets, reversible drills, saws, and impact wrenches in ½” and 3/8” capacity, 3” reversible cut off tools, and hammers – all with feather triggers and high RPM in Canada and the US.
WDS Components’ castor range extension includes a new stud fitting design with an M12 size threaded shaft that extends installation flexibility. The stud fitting design joins the existing bolt hole style, as well as a variety of castors with a plate fitting attachment. The castor design also includes a swivel wheel action, making them easy to operate across various surface types, as well as a foot-operated brake mechanism.
The dual gripper system on the versaLoad allows manufacturers to reduce part loading times by as much as 50% when compared to a single gripper setup. This allows the automation cell to operate with maximum efficiency, enabling versaLoad users to boost productivity without having to increase headcount.
There are two stocked and standard product offerings where gundrills are delivered within 24 hours of the order. The SFGD Express program is for Single Flute Gundrills in diameters from 0.1250” - 0.7500” (3.175mm - 19.050mm) and lengths up to 48” (1219mm). The SCGD Express program is for Single Flute Solid Carbide Gundrills with standard ½” steel shanks in diameters from 0.0355”- 0.1969” (0.902mm - 5.000mm) in lengths from 4”- 12” (102mm - 305mm), depending on the tool diameter.  
Among the additions are new models of the company’s Carbide Micro Grinding Mandrels for optimized precision micro machining accuracy and performance. Carbide Micro Grinding Mandrels are compatible for use with Tungsten Carbide, fiberglass, stone, marble, ferrite, composites, non-ferrous metals, industrial ceramics, rubber, reinforced plastics, glass, and other hard abrasive materials. Offered in both Diamond and Borazon Jig types, the grinding mandrels are further available with a choice of either 500/600 or 325/400 grit, as well as either a 0.016”, 0.020”, or 0.02” head size.
VpCI-126 PCR offers excellent performance, protecting metal parts from all types of corrosion, including rust, stains, tarnish, white rust, and oxidation for up to 5 years.* Metal parts packaged in Cortec VpCI-126 PCR receive continuous protection from salt, excessive moisture, condensation, aggressive industrial atmospheres, and dissimilar metal corrosion.
Electrak XD linear actuators are available immediately as a compact, fully integrated unit, including the motor, drive, IP-rated housing, control architecture, diagnostic features and more. The end result is a "plug and play" actuator that saves the designer money and time.
The compact stainless steel adjustable bracket can be installed into a customer’s process. Operations requiring both hands to package, test or assemble parts now remain static free. The nozzle is equipped with an LED indicator to assure proper functionality while employing EXAIR-engineered air nozzles to maximize efficiency and meet OSHA requirements for sound level and dead-end pressure. Made from durable static dissipative polycarbonate and featuring a non-marring nozzle, the Intellistat assures its usefulness in applications such as PCB or electronics manufacturing.
Waterjet cutting works as simply as it is effective: the cutting head directs a fine jet of water at high pressure of up to 6,000 bar, a jet diameter of 0.38 to 1.02 millimeters. In this stress-free cutting process, the material particles close to the surface are cut off without any heat being introduced into the material. This process is an optimal solution for temperature-sensitive and thick materials with complex geometries.
The RFID transponders are available as freely writeable and preconfigured versions. A transparent window on the PITreader card enables users to still read the LED status indicator when the card is held up to it. If the company already uses RFID-capable cards, these can also be used in conjunction with PITreader card unit. In this case, users need only one card for multiple functions.
The horizontal arrangement of the tool pockets greatly improves machinist safety. Traditional tool racks and carts keep tools in a vertical position with the cutter tip pointing up. This creates a risk of injury for operators when they need to reach over sharp edges to access other tools in the middle or back of the cart. The Tool Caddy design makes it easy and convenient for the operator to grab each toolholder without any risk of cuts, and it uses only about 4 square feet of floor space.
Thomson compact linear systems are appropriate for applications requiring high-accuracy linear axes in confined spaces, such as 3D printers, microscope stage managers, medical pipetting systems and semiconductor manufacturing. They are available with NEMA motor sizes between 14 and 23; stroke lengths of up to 40 in (1000 mm); and load capacities up to 2091 lbs (9300 N).
The horizontal arrangement of the tool pockets greatly improves machinist safety. Traditional tool racks and carts keep tools in a vertical position with the cutter tip pointing up. This creates a risk of injury for operators when they need to reach over sharp edges to access other tools in the middle or back of the cart. The Tool Caddy design makes it easy and convenient for the operator to grab each toolholder without any risk of cuts, and it uses only about 4 square feet of floor space.
With CenterMaster, the user simply clamps a radio dial gauge into the workspace and sets it to the quill. The gauge and machine wirelessly communicate, automatically adjusting the holder along the X axis. The system then guides the operator through adjusting the Y axis via the machine’s touchscreen display.
Quick release clamp fasteners help increase productivity by reducing set up times, eliminating errors in assembly and installation and simplifying procedures. They are ideal for frequent set ups, regularly or to reconfigure production equipment. Most specifically, these fasteners may be used in automation to attach conveyors, star wheels, guide plates, shooters, pushers, handling machine chucks, rotary blades and maintenance covers on machines, to name just a few applications. The clamps offer locating repeatability to +/- 0.1 mm.
There are two types of levers available for the E-Xtreme series enclosures. The standard C-type lever is made of a stainless-steel frame and polyamide handle, and it provides an IP65/IP66 protection degree. The E-Xtreme enclosures with the C-type lever are ideal for environments with salt mist, ultraviolet rays, corrosive chemicals, and frequent mating. The V-type lever is ideal for environments with higher humidity levels, lower temperatures with ice, and salt mist because it provides better waterproofing with IP66/IP67 protection rating thanks to its vertical closing movement. Also, the V-type lever is also more resistant to shocks, fire, and chemicals because the lever is made of full stainless steel without using any plastic components.
Today’s MAX System introduces the latest innovation known as Focused Deburring. These multi-axis machines feature up to four 1- to 5-axis heads or towers, which can process simultaneously or in sequence within a single working environment. This ability allows the machines to perform multiple operations on many edges and surfaces of a part at the same time. For example, a single MAX System can remove a protruding burr from an 8” spur gear, create a precision .060” chamfer on both sides of the same gear, and wash the part within 30 seconds.
The PS2000 variants combine high-performance power supply units from Beckhoff with the ultra-fast EtherCAT communication standard. This allows the control system to directly process extensive measurement data and internal device diagnostics information and establish remote access to power supplies. It also provides advanced monitoring features for the DC output (for system monitoring) or the AC input (for source monitoring).
The unit uses multiple spray nozzles on its circumference, providing a steady and pressurized stream. Each nozzle can be plugged or opened to create customized spray patterns. Added spindle rotation ensures that coolant reaches virtually everywhere inside the machine. Residing in the tool changer, and programmed just as any other, the Jergens Washdown Tool is deployed periodically at scheduled intervals. This automation shortens cleaning time and supports long machining cycles, even lights out manufacturing periods when no operator is present.
Both die grinders feature RAPIDSTOP™ Brake for enhanced user safety, stopping most accessories in less than two seconds. Combining three exclusive innovations - the POWERSTATE™ brushless motor, REDLITHIUM™ battery pack, and REDLINK PLUS™ intelligence- these new die grinders provide users with the versatility and performance needed to remove material faster than a corded die grinder. 
Using Vapor phase Corrosion Inhibitor (VpCI®) technology, the bubbles protect a variety of metals, including carbon steel, aluminum, copper, brass, silver and stainless steels, without leaving film or residue on packaged items. CorShield® Bubble Bags are non-toxic and recyclable. Components that need  protection are placed in the bags and in matter of hours, the vapor from the VpCI® bubbles saturates the enclosed airspace.
The miniature lead screw line is available with either standard or anti-backlash lead nuts to optimize positional accuracy, friction and repeatability. The anti-backlash lead nut design reduces friction between the nut and screw threads in order to optimize efficiency while still eliminating play between the lead screw and nut. 
The swivel feet with a steel double bolt down base includes two screw holes enabling secure surface attachment. The threaded female design accepts inserts from M6 up to M16 while the foot diameter varies from 40mm to 100mm. The swivel joint allows 50° forward and backwards tilt across a 360° horizontal plane, providing flexible installation whatever the floor angle. This design is manufactured in durable steel with a nickel plating to resist corrosion and provide a bright finish.
KettleTag PLUS EZ is a proven solution that requires NO extra steps.  Fabricators and galvanizers can print this tag, attach it to their steel, and read the barcode on the tag after the steel has been galvanized.  The days of using laminators and cutting tags apart are over, which makes the identification process more efficient for our customers.
Easily retrofitted, the PSS-T300 provides excellent access to the work area while offering space-savings via its tower design. The new pallet storage system offers flexible setup options and can be paired with one or two machines, and configured with one or two setup stations. The PSS-T300 can handle a variety of pallet sizes including Erowa ITS148/ PC210 and GROB standard 320 x 320 mm/ 400 x 400 mm, and has storage capacity of up to 81 round pallets and up to 38 square pallets. For ease of operation, integrated software enables intuitive cell control.
XPlanar now provides greater traceability through ID technology integrated into the mover bumper. The ID functionality enables unique identification of XPlanar movers by reading the mover’s individual serial number. The ID bumper is easy to mount or retrofit on movers already in the field, and it requires no additional hardware. This solution makes it possible to seamlessly track movers and the products they carry – even after system shutdown and restart. The bumper ID also eliminates the need for homing at system startup with appropriate programming.
Featuring a powerful, 30-watt fiber laser and a large, 100 x 100 mm marking window, MobiLase® Battery delivers fast and durable laser markings on nearly any material ranging from plastics to steel to precious metals, among many others. The 7-lb. handheld applicator is equipped with a trigger to start marking plus two bracket options for ease of marking various part shapes.
The soft closing design is especially suitable for applications with frequent opening and closing, thanks to the self-extinguishing UL-approved thermoplastic locking lever component that significantly reduces friction and wear when it slides on the pegs. The stainless-steel core then intervenes to ensure higher resistance against various mechanical stresses and vibrations from harsh industrial environments.
Powertite, with its perfect geometric fit, increases load-bearing capacity in the tapped nut thread by over 20 percent compared to screws with trilobular load-bearing cross-section. That creates a series of technical and commercial benefits: standards-compliant tapping torques, plastically stressed assembly even into conical cast core holes in Al-Gd, a preload force similar to metric fastenings, and the possibility of larger core hole tolerances to optimise lightweight metals casting.
The S100 can be configured to meet each customer’s individual needs. It can be equipped with up to two internal grinding spindles, or one internal and one external spindle. In addition to a fixed wheelhead, it can be supplied with a manual wheelhead and a 2.5 degree Hirth coupling. The optimal combination consists of an automatic wheelhead with a 1 degree Hirth. A synchronous motor drives the grease-lubricated internal and external belt spindles. The machine is operated by the FANUC 0i-TF PLUS controller, together with the proven STUDER operating system.
MH140 fits most machine coolant tanks, and the small footprint – no larger than a standard conveyor – saves valuable floor space. A unique frame design using high-strength materials enables the conveyor to withstand extreme loads, torsional forces and abrasion for trouble-free operation and long life.
The consolidated range of enclosure parts includes a wide variety of locks, latches, and catches to suit all requirements. Quarter turn locks are frequently specified for enclosures thanks to their ease of operation while ensuring secure door closure. The device comprises a cylindrical body with a cam lever arm that secures in just a quarter of a turn. Simple operation makes them ideal for fast access to machine panels or general purpose lockers.
The basis for the extraordinary flexibility of the HELITRONIC MINI PLUS is the unique WALTER gantry design. The economical production of common and complex geometries of tools with a diameter range of 1mm - 16mm (0.04" - 0.63") in one clamping is guaranteed by the powerful HSK belt spindle with two spindle ends for up to six grinding wheels. In addition, the revolutionary C.O.R.E. hardware and software architecture with intuitive operation facilitates machine set-up, operation, networking and maintenance.
The 2700 Medium Duty hits the sweet spot between Dorner’s popular low profile 2200 and 3200 heavy duty platforms. While the 2200 conveyor can carry up to 80 pounds, and the 3200 conveyor can support up to 400 pounds, the 2700 Medium Duty is engineered to safely convey up to 150 pounds. This expanding portfolio of industrial conveyors give customers a full breadth of options to select the right platform for their specific application.
Mencom offers a compact enclosure series engineered for ease of assembly and simplicity in mind. These fully metallic enclosures are available in size 32.13 exclusively and their hoods are designed in one piece for any wiring combination with a robust stainless-steel lever. They can be served as EMC (Electro Magnetic Compatibility) enclosures and are corrosion resistant thanks to the conductive layer of galvanic zinc plating on the surface.
The outer race of the ball bearing is embedded in the POM plastic of the guide roller during the molding process. Each roller is machined to precise dimensions for an exact runout, which makes cylindrical and convex shaping of the running surface possible. Convex rolling surfaces compensate for alignment errors by preventing them from running on corners or edges.
The belt grinder features two belt heads ensuring the ultimate flexibility to handle platen grinding, contact wheel grinding and even slack back grinding. Its design enables roughing to intermediate grinding to blending as well as final finishing and polishing.
CorShield VpCI-220E Films and Bags combine the latest film technology with the most effective corrosion protection for metal products. Vapor phase Corrosion Inhibitors protect multi-metals (aluminum, carbon steel, galvanized steel, and copper) from all types of corrosion including rust, tarnish, stains, and white rust.
These S Series caps are available with a plain top, and many of the sizes are also available with a knurled top-collar, which makes them easy-to-grip and remove.  In addition, the caps are also available in both LDPE plastic and flexible TPE.
The unit control of the Connect.series range, with its compact size, has a large 10’’ touch screen in tempered glass and pairs in just a few seconds to the marking head thanks to the RFID technology. It can connect to the network and exchange data with the information system (ERP, MES). Its intuitive software developped by Technomark make marking possible within 3 clicks.
Users can machine this collet attachment to adapt it to match the internal contour of the workpiece they are clamping. However, what makes this new exhibit from AMF so special is that no through holes are needed in the workpiece to achieve safe internal clamping. With mechanical lateral actuation, workpieces with a blind hole can also be clamped securely and without distortion.
Piezoelectric materials convert electrical energy into mechanical energy and vice versa; the so-called inverse piezo effect is harnessed for the generation of oscillation and precision motion. For ultrasonic applications that require high bandwidth, hemispheres and hollow spheres are currently available with an outside diameter range from 2 – 100mm with wall thickness as small as 0.2mm. Uses for electro-ceramic spherical transducers include medical high-intensity focused ultrasound (HIFU), therapeutic ultrasound, hydrophones, and sonar transducers.
One of the primary benefits of vibratory feeders in the nut processing industry is the simple and clean construction of the feeder tray. The trays can be easily and quickly wiped down or washed out for product changeover or sanitation protocol.
Made from 316 stainless steel, the hinges can be used in environments subject to regular washdown with aggressive detergents. The design provides long-term resistance to corrosion, and rounded edges prevent accumulation of bacteria, enabling an easier and more effective wash-down.
The company’s Tiger system has firmly established itself as the gold standard for cutting tool insert finishing, with installations in many of the world’s leading cutting tool insert manufacturers. The system can be configured to process inserts for all essential pre-coating, edge honing or post-coating operations.
The PermaClean Filtration System eliminates sludge build up by adding optional agitation to the coolant collection tank. FlexForce is a high-pressure coolant system that dramatically outperforms ordinary flood systems. Will-fill combines automatic volume measurement and metalworking fluid analysis with faultless filling, permanent conditioning and timely reporting to provide worry-free coolant care.
The new medium duty range of ball transfer units is manufactured by a machine cutting process that retains strength and rigidity, enabling the units to transport higher weight loads. Versions include a carbon steel and zinc plated body with a Steel 9Cr18Mo ball, and the units can also operate in climates from -20°C to +60°C. A model with a 304 stainless steel body and ball also adds protection in moisture-prone environments or when facing exposure to more aggressive chemicals.
FL Series markers can be mounted in open Class 4 workstations or Class 1 safety enclosures, with a programmable Z-axis, optional rotary D-axis, and integrated barcode reading and verifying technology. They are designed for easy integration into robotic cells, production lines, and other highly engineered solutions to support modern manufacturing environments. 
In situations where the Line Vac requires a specific flange mounting option, EXAIR can accommodate. Locations requiring custom mounting holes, brackets or inlet positions are possible. For applications where stock aluminum, or 303 and 316 stainless steel won’t work, alternate materials like PVDF, OVC or PTFE can be utilized. Even in extreme environments, EXAIR can produce both heavy duty or high temperature iterations to handle even the toughest material or conditions.
The N-30m2 SSD series is based on industrial-grade 3D TLC NAND and can withstand temperatures ranging from -40 to +85 °C. The PCIe 4-lane interface follows the PCIe 3.1 specification and provides sequential read and write bandwidths of up to 3,500 MB/s and 3,100 MB/s, respectively. For read and writes, random access achieves more than 475,000 and 525,000 IOPS, respectively.
VGrind 260, VGrind Neon and VGrind Argon – these are the names of the three new tool grinding machines from the sharpening specialist VOLLMER. They were presented for the first time at the GrindingHub 2022 trade fair in Stuttgart.
A start-up company near Chicago designs and fabricates custom tool foam inlays for toolboxes, workstations, travel cases and reusable packaging. Kaiser Manufacturing says its process fills the need for a custom solution that is superior to hand-cut tool foam in both function and appearance.
The S36 has a fixed grinding head, with grinding wheel angles of 0, 15 or 30 degrees available. The distance between centers is 650mm and the maximum workpiece weight is 150kg. Proven components have been used in the machine. These include a Granitan® machine bed and a workhead with high-precision roller bearings.
The new duo of VOLLMER grinding machines designed for machining carbide-tipped circular saw blades, is made up of the CS 860 and CSF 860.
Featured on new GF Machining Solutions’ CUT P Pro Series wire EDMs, the iWire function works in tandem with the company’s Intelligent Spark Protection System (ISPS), both of which are part of the company’s Uniqua control.
The volume reduction of aluminum, magnesium, copper, brass, steel and other types of metal chips represents a significant cost savings in labor, disposal, transport and storage. Jorgensen/SFH single and double-shaft shredders efficiently reduce chip size in preparation for centrifuging or briquetting. The volume reduction resulting from implementing a shredder also lessens the frequency of bin removal from a machine, giving a shop’s employees additional time to focus on other more productive work. Jorgensen/SFH offer a variety of shredder size options constructed per a customer’s material and desired chip output needs.
These guide rails are assembled from precisely matched components: linear guide rails GN 2492, the matching cam roller carriages GN 2494 and the separately available wipers of TPU plus the individual rollers with three different bore types. The exceptionally stable guide rails are produced in a rolling process and can be mounted using the typical bore pattern, even up to a rail length of 97.64 in (2480 mm).

Buyers Guide Companies for Machining

+ click to show 591 more results
3M Personal Safety Div. https://www.3m.com/3M/en_US/safety-us/
ABA Water Systems Inc. 507-534-3870 http://www.abawatersystems.com
ABA Water Systems Inc. 507-534-3870 http://www.abawatersystems.com
Abanaki Corp., Oil Skimmer Div. 440-543-7400 http://www.abanaki.com
Abbott Workholding Products 785-776-8555 http://www.abbottworkholding.com
Abbott Workholding Products 785-776-8555 http://www.abbottworkholding.com
ABCO Automation Inc. 336-375-6400 http://www.goabco.com
Able Electropolishing Co. Inc. 866-465-8427 http://www.ableelectropolishing.com
Absolute Machine Tools 440-960-6911 https://www.absolutemachine.com
AccuStream 651-294-8600 http://www.accustream.com
Active Automation Inc. 847-427-8100 http://www.activeautomation.com
Adams Supply Co. 714-754-0551 http://www.ymwtaps.com
Adron Tool Corp. 262-255-4433 https://www.adron.com
Advanced Deburring & Finishing 717-767-4843 http://www.advanceddeburring.com
Advanced Machine & Engineering 815-979-3380 http://www.ame.com
Advanced Machine & Engineering 815-979-3380 http://www.ame.com
Advanced Superabrasives 702-564-7735 http://www.advanced-sa.com
Advanced Superabrasives Inc. 828-689-3200 http://www.asiwheels.com
AeroGo Inc. 206-575-3344 http://www.aerogo.com
Aerotech Inc. 412-963-7470 http://www.aerotech.com
AFC-Holcroft LLC 248-624-8191 http://www.afc-holcroft.com
AHD/Flex-E-On Inc. 330-928-4456 http://www.ahd-flex-e-on.com
Alfra Tools LLC 847-844-8900 http://www.alfratools.com
ALIO Industries 303-339-7500 https://www.alioindustries.com
Almco Inc. 507-377-2102 http://www.almco.com
Almco Inc. 507-377-2102 http://www.almco.com
Aloris Tool Technology Co. Inc. 973-772-1201 http://www.aloris.com
Aloris Tool Technology Co. Inc. 973-772-1201 http://www.aloris.com
Alpex Wheel Co. 201-871-1700 http://www.alpexwheel.com
American Broach & Machine Co. 734-961-0300 http://www.americanbroach.com
American Natl. Carbide 281-351-7165 http://www.anconline.com
American Shop Tools LLC 936-828-3933 http://www.americanshoptools.com
Anomet Products 508-842-3069 http://www.anometproducts.com
ARCH Cutting Tools 888-390-2050 http://www.ARCHcuttingtools.com
ARCH Cutting Tools 888-390-2050 http://www.ARCHcuttingtools.com
ARNO Werkzeuge USA 815-943-4426 http://www.arnousa.com
Astro Met Advanced Ceramics 513-772-1242 http://www.astromet.com
Astro Met Advanced Ceramics 513-772-1242 http://www.astromet.com
Astro Met Advanced Ceramics 513-772-1242 http://www.astromet.com
ATI Industrial Automation 919-772-0115 http://www.ati-ia.com
Atometric Inc. 815-986-7352 http://www.atometric.com
ATS Systems 949-888-1744 http://www.atssystems.us
ATS Systems 949-888-1744 http://www.atssystems.us
atto Abrasives 353-51-562-700 https://attoabrasives.com/
AutoCrib 714-274-0400 http://www.autocrib.com/industrial-vending
Balance Systems Corp. 248-308-3636 https://www.balancesystems.com/process-control-systems-for-grinding-machines-us…
Balance Systems Corp. 248-308-3636 https://www.balancesystems.com/process-control-systems-for-grinding-machines-us…
Beckett Packaging, a Div. of MOCAP 314-543-4000 http://www.beckettpackaging.com
Beckett Packaging, a Div. of MOCAP 314-543-4000 http://www.beckettpackaging.com
Beckwood Press Co. 636-343-4100 https://beckwoodpress.com/
Behringer Saws Inc. 888-234-7464 http://www.behringersaws.com
Bel Air Finishing Supply Corp. 401-667-7902 http://www.belairfinishing.com
Bel Air Finishing Supply Corp. 401-667-7902 http://www.belairfinishing.com
Belden Machine Corp. 708-344-4600 http://www.beldenmachine.com
Belmont Equip. & Technologies 248-588-7011 http://www.belmont4edm.com
Benz Tooling 704-529-5300 https://www.benztooling.com/en-US
Benz Tooling 704-529-5300 https://www.benztooling.com/en-US
Bertsche Eng. Corp. 847-537-8757 http://www.bertsche.com
Best Carbide Cutting Tools LLC 310-464-8050 http://www.bestcarbide.com
BEX Inc. 734-389-0464 http://www.bex.com
BIG DAISHOWA Inc. 224-770-2999 https://www.bigdaishowa.com/en
BIG DAISHOWA Inc. 224-770-2999 https://www.bigdaishowa.com/en
Bohle Machine Tools Inc. 734-414-8220 http://www.bmtbohle.com
Bokum Tool Co. 248-585-0222 http://www.bokumtoolco.com
Bonal Technologies Inc. 248-582-0900 http://www.bonal.com
Bonal Technologies Inc. 248-582-0900 http://www.bonal.com
Borroughs Corporation 800-748-0227 https://www.borroughs.com/
Boston Centerless 781-994-5000 https://www.bostoncenterless.com
Briney Tooling Systems 989-269-9558 http://www.brineytooling.com
Briney Tooling Systems 989-269-9558 http://www.brineytooling.com
Briney Tooling Systems 989-269-9558 http://www.brineytooling.com
Briney Tooling Systems 989-269-9558 http://www.brineytooling.com
Brush Research Mfg. Co. Inc. 323-261-2193 http://www.brushresearch.com
Brush Research Mfg. Co. Inc. 323-261-2193 http://www.brushresearch.com
BTA Heller 248-597-0346 http://www.btahellerinc.com
Bunting Magnetics Co. 316-284-2020 http://www.buntingmagnetics.com
Bunting Magnetics Co. 316-284-2020 http://www.buntingmagnetics.com
Bunting Magnetics Co. 316-284-2020 http://www.buntingmagnetics.com
Burkhardt+Weber 859-308-6625 https://burkhardt-weber.com
Burkhardt+Weber 859-308-6625 https://burkhardt-weber.com
C&B Machinery 248-264-9800 http://www.cbmachinery.com
Cammann Inc. 440-965-4051 http://www.cammann.com
Carbide Products Inc. 877-863-2340 http://www.carbidepros.com
Carbide Products Inc. 877-863-2340 http://www.carbidepros.com
Carbide Tool Services Inc. 763-421-2210 http://www.carbidetool.com
Carl Hirschmann Inc. 847-468-9700 http://www.carlhirschmann.us
Carr Lane Mfg. Co. 314-647-6200 http://www.carrlane.com
Carr Lane Mfg. Co. 314-647-6200 http://www.carrlane.com
Carr Lane Mfg. Co. 314-647-6200 http://www.carrlane.com
CECOR 608-845-6771 http://www.cecor.net
Centricity Corp. 330-545-5624 http://www.centricity.net
Centricity Corp. 330-545-5624 http://www.centricity.net
Centricity Corp. 330-545-5624 http://www.centricity.net
Centricity Corp. 330-545-5624 http://www.centricity.net
Ceratizit USA Inc. 800-783-2280 https://cuttingtools.ceratizit.com/us/en.html
Ceratizit USA Inc. 800-783-2280 https://cuttingtools.ceratizit.com/us/en.html
Chevin Tools Inc. 847-690-1278 http://www.chevintools.com
Chicago Quadrill Co. 847-824-4196
Chips Tool Repair 763-323-4080 http://www.chipstoolrepair.com
Cincinnati Inc. 513-367-7100 http://www.e-ci.com
Cleartec Packaging, a Div. of MOCAP 314-543-4150 http://www.cleartecpackaging.com
CMW Tech 215-721-0120 https://cmwtech.com
CMW Tech 215-721-0120 https://cmwtech.com
CNC Indexing & Feeding Technologies 513-770-4200 http://www.cncindexing.com
Cogsdill Tool Products Inc. 803-438-4000 http://www.cogsdill.com
Cogsdill Tool Products Inc. 803-438-4000 http://www.cogsdill.com
Cole Family of Companies 586-757-8700 http://www.colecarbide.com
Complete Tool Grinding Inc. 763-571-4242 http://www.completetoolgrinding.com
Computed Tool & Eng. Inc. 714-630-3911 http://www.computedtool.com
Concept Machine Tool 763-559-1975 http://www.conceptmachine.com
Concept Machine Tool 763-559-1975 http://www.conceptmachine.com
Conicity Technologies LLC 724-537-3555 http://www.conicity.com
Continental Pipe & Tube Cut-Off Machines 630-543-7170 http://www.continentalcutoff.com
Control Gaging Inc. 734-668-6750 http://www.controlgaging.com
Cool Clean Technologies LLC 651-842-8600 http://www.coolclean.com
Cool Clean Technologies LLC 651-842-8600 http://www.coolclean.com
Cosen Saws USA 704-943-1030 http://www.cosensaws.com
Craftsman Industries Inc. 702-566-5808 http://www.craftsmanindustries.com
Craftsman Industries Inc. 702-566-5808 http://www.craftsmanindustries.com
Craftsman Industries Inc. 702-566-5808 http://www.craftsmanindustries.com
Createch Machine and Design 863-688-0071 http://www.createch-design.com
Cryoplus Inc. 330-683-3375 http://www.cryoplus.com
Cryoplus Inc. 330-683-3375 http://www.cryoplus.com
Crystal Mark Inc. 800-659-7926 http://crystalmarkInc.com
CUMI America Inc. 859-372-6606 http://www.cumiusa.com
Current EDM Inc. 650-966-9676 http://www.currentedm.com
D&C Tool Grinding Inc. 918-689-9799
Danobat 34-943-748044 http://www.danobat.com
Danray Products LLC 815-262-6667 http://www.danrayproducts.com
Desmond-Stephan Mfg. Co. 937-653-7181 http://www.desmond-stephan.com
Detector France, c/o SPC Innovations Inc. 410-643-1600 http://www.spcinnovations.com
Deublin Co. 847-689-1074 https://www.deublin.com
Dialight 732-919-3119 http://www.dialight.com
Diamond Die & Mold Co. 586-791-0700 http://www.diamond-die.com
Diamond Die & Mold Co. 586-791-0700 http://www.diamond-die.com
Dianamic Abrasive Products Inc. 248-280-1185 http://www.dianamic.com
Dillon Chuck Jaws 937-325-8482 http://www.dillonmfg.com
Diversified Machine Systems 719-226-5066 https://dmscncrouters.com
Diversified Machine Systems 719-226-5066 https://dmscncrouters.com
Divine Brothers Co. 315-797-0470 http://www.divinebrothers.com
Drillco Cutting Tools 225-272-8251 http://www.drillco-inc.com
DropsA USA Inc. 586-566-1540 https://www.dropsausa.com
DropsA USA Inc. 586-566-1540 https://www.dropsausa.com
Dunham Tool Co. 712-542-1908 http://www.dunhamtool.com
Dunham Tool Co. 712-542-1908 http://www.dunhamtool.com
Duracable Manufacturing Co. 877-244-0740 https://www.duracable.com
E-Z Burr Tool Co. Inc. 734-744-4500 http://www.ezburr.com
East Coast Precision Manufacturing LLC 860-322-4624 https://www.eastcoastmfg.com
Ebbco Inc. 586-716-5151 http://www.ebbcoinc.com
Ebbco Inc. 586-716-5151 http://www.ebbcoinc.com
Ebbco Inc. 586-716-5151 http://www.ebbcoinc.com
Ebbco Inc. 586-716-5151 http://www.ebbcoinc.com
Ebbco Inc. 586-716-5151 http://www.ebbcoinc.com
Eclipse Magnetics 905-664-5585 http://www.eclipsemagnetics.com/na
Ecoclean Inc. 248-450-2586 https://ecoclean-group.us/
Ecoroll Corp. Tool Technology 513-248-4700 http://www.ecoroll.com
EDGE Deephole Drilling Tools and Systems 281-807-3131 http://www.edgedeephole.com
Edge Technologies 314-692-8388 http://www.edgetechnologies.com
EDM Intelligent Solutions 630-736-0531 http://www.edmdept.com
EDM Intelligent Solutions 630-736-0531 http://www.edmdept.com
EDM Performance Accessories 562-694-5990 http://www.edmperformance.com
EDM Performance Accessories 562-694-5990 http://www.edmperformance.com
Electrochemical Products Inc. 262-786-9330 http://www.epi.com
Electron Beam Technologies Inc. 815-935-2211 http://www.electronbeam.com
Ellsworth Cutting Tools Ltd. 586-598-6040 http://www.ellsworthtoolsusa.com
EMAG eldec Induction GmbH 49-7443-9649-0 http://www.eldec.net
Emerson Electric Co. 314-553-2000 https://www.emerson.com/en-us
EMUGE-FRANKEN USA 508-595-3600 http://www.emuge.com
EMUGE-FRANKEN USA 508-595-3600 http://www.emuge.com
EMUGE-FRANKEN USA 508-595-3600 http://www.emuge.com
EMUGE-FRANKEN USA 508-595-3600 http://www.emuge.com
EndeavorTechnologies Inc. 630-562-0300 http://www.endtec.com
Endurance Carbide 989-777-7950 http://www.endurancecarbide.com
Endurance Carbide 989-777-7950 http://www.endurancecarbide.com
Enerpac 262-293-1600 http://www.enerpac.com
Engis Corp. 847-808-9400 https://www.engis.com
Engis Corp. 847-808-9400 https://www.engis.com
Eriez 814-835-6000 http://www.eriez.com
Eriez 814-835-6000 http://www.eriez.com
EROWA Technology Inc. 847-290-0295 http://www.erowa.com
ESAB Corp. 301-323-9099 https://www.esabcorporation.com
Fairlane Products 586-294-6100 http://www.fairlaneproducts.com
FANUC America 888-FANUC-US http://www.fanucamerica.com
FARO Technologies Inc. 800-736-0234 http://www.faro.com
Fischer Special Tooling 440-951-8411 http://www.fischerspecialtooling.com
Fischer Technology Inc. 860-683-0781 http://www.fischer-technology.com
Fitz-Rite Products 248-689-7143 http://www.fitzrite.com
Fitz-Rite Products 248-689-7143 http://www.fitzrite.com
Fitz-Rite Products 248-689-7143 http://www.fitzrite.com
Fixtureworks 586-294-1188 http://www.fixtureworks.net
Fixtureworks 586-294-1188 http://www.fixtureworks.net
Flex Machine Tools 800-837-2503 https://flexmachinetools.com
Flex Machine Tools 800-837-2503 https://flexmachinetools.com
Flex-E-On Inc. 330-928-4496 http://www.ahd-flex-e-on.com
Flexpipe Industries 514-907-5882 http://www.flexpipeinc.com
Flow Intl. Corp. 253-850-3500 http://www.flowwaterjet.com
Flow Pro Products Inc. 815-836-1900 http://www.flowproinc.com
Force Control Industries Inc. 513-868-0900 http://www.forcecontrol.com
G II Solutions Inc. 864-639-6605 http://www.giisolutions.com
Gagemaker LP 713-472-7360 http://www.gagemaker.com
GCH Tool Group 586-777-6250 http://www.gchtool.com/
GCH Tool Group 586-777-6250 http://www.gchtool.com/
Gehring LP 248-427-3901 http://www.gehring.de/en-ww
Genesee Mfg. Co. Inc. 585-266-3201 http://www.geneseemfg.com
Genevieve Swiss Industries Inc. 413-562-4800 http://www.genswiss.com
Genevieve Swiss Industries Inc. 413-562-4800 http://www.genswiss.com
GenSwiss 413-562-4800 http://www.genswiss.com/
George H. Seltzer & Co. 610-532-2322 http://www.zipbolts.com
Gerardi USA 847-515-3234 http://www.gerardiusa.com
Gerber N.A. 336-653-1425 http://www.gerber-maschinen.ch
Gerstner & Sons Inc. 937-228-1662 http://www.gerstnerusa.com
GF Machining Solutions 847-955-7177 http://www.gfms.com/us
GF Machining Solutions 847-955-7177 http://www.gfms.com/us
Gladwin Machine Inc. 989-426-8753 http://www.gladwinmachine.com
Gladwin Machine Inc. 989-426-8753 http://www.gladwinmachine.com
Global CNC Industries 734-464-1920 http://www.globalcnc.com
Global CNC Industries 734-464-1920 http://www.globalcnc.com
GMN USA 860-409-2550 http://www.gmnusa.com
GMN USA 860-409-2550 http://www.gmnusa.com
GMSi Group Inc. 508-612-9482 http://www.gmsigroup.com
Goessling USA Inc. 423-915-0472 http://www.goesslingusa.com
Goodway Technologies Corp. 800-333-7467 http://www.goodway.com
Gorilla Mill 866-888-9600 http://www.cgctool.com
Graymills Corp. 773-477-4100 http://www.graymills.com/
Graymills Corp. 773-477-4100 http://www.graymills.com/
Greenleaf Corp. 814-763-2915 http://www.greenleafcorporation.com
Grizzly Industrial Inc. 570-546-9663 http://www.grizzly.com
Grizzly Industrial Inc. 570-546-9663 http://www.grizzly.com
Grobet File Co. of America 201-939-6700 http://www.grobetusa.com
GTI Spindle Technology Inc. 603-669-5993 http://www.gtispindle.com
GTI Spindle Technology Inc. 603-669-5993 http://www.gtispindle.com
GTI Spindle Technology Inc. 603-669-5993 http://www.gtispindle.com
GTI Spindle Technology Inc. 603-669-5993 http://www.gtispindle.com
Guhring Inc. 262-784-6730 http://www.guhring.com
Guyson Corp. of USA 518-587-7894 http://www.guyson.com
Guyson Corp. of USA 518-587-7894 http://www.guyson.com
Haimer USA LLC 630-833-1500 https://haimer.com/us
Haimer USA LLC 630-833-1500 https://haimer.com/us
Haimer USA LLC 630-833-1500 https://haimer.com/us
Haimer USA LLC 630-833-1500 https://haimer.com/us
Hainbuch America Corp. 414-358-9550 http://www.hainbuchamerica.com
Hainbuch America Corp. 414-358-9550 http://www.hainbuchamerica.com
Halifax Rack & Screw 513-449-4296 http://www.halifaxrs.com
Halifax Rack & Screw 513-449-4296 http://www.halifaxrs.com
Hardinge Workholding Div. 607-734-2281 http://www.hardinge.com
Harrington Hoists Inc. 717-665-2000 http://www.harringtonhoists.com
Heidenhain Corp. 847-490-1191 http://www.heidenhain.us
HEMCO Corp. 816-796-2900 https://www.hemcocorp.com/
Hennig Inc. 815-636-9900 http://www.hennigworldwide.com
Hennig Inc. 815-636-9900 http://www.hennigworldwide.com
Hennig Inc. 815-636-9900 http://www.hennigworldwide.com
Hermann Schmidt Precision Workholding 860-289-3347 http://www.hschmidt.com
Hermann Schmidt Precision Workholding 860-289-3347 http://www.hschmidt.com
Hermann Schmidt Precision Workholding 860-289-3347 http://www.hschmidt.com
HEULE Tool Corp. 513-860-9900 http://www.heuletool.com
Hexagon Mfg. Intelligence 401-886-2000 http://www.hexagonmetrology.us
Hexagon Mfg. Intelligence 401-886-2000 http://www.hexagonmetrology.us
Hogue Precision Machinery 209-892-5649 http://www.hogueprecision.com
HORN USA Inc. 615-771-4100 http://www.hornusa.com
HORN USA Inc. 615-771-4100 http://www.hornusa.com
Hyde Group 508-764-4344 http://www.hydetools.com
Hydra-Lock Corp. 586-783-5007 http://www.hydralock.com
Hydra-Lock Corp. 586-783-5007 http://www.hydralock.com
Hyperion Materials & Technologies 614-438-2300 https://www.hyperionmt.com/
igus Inc. 401-438-2200 http://www.igus.com
IMPCO Microfinishing 517-484-9411 http://www.impco.com
Industrial Magnetics Inc. 231-582-3100 http://www.magnetics.com
Ingersoll Cutting Tools 815-387-6600 http://www.ingersoll-imc.com
Ingersoll Cutting Tools 815-387-6600 http://www.ingersoll-imc.com
Iscar USA 817-258-3200 http://www.iscarmetals.com
Iscar USA 817-258-3200 http://www.iscarmetals.com
Iscar USA 817-258-3200 http://www.iscarmetals.com
Iscar USA 817-258-3200 http://www.iscarmetals.com
ITI Tooling Co. Inc. 201-934-6333 http://www.ititooling.com
ITI Tooling Co. Inc. 201-934-6333 http://www.ititooling.com
ITI Tooling Co. Inc. 201-934-6333 http://www.ititooling.com
ITW Air Management-Vortec 513-891-7474 http://www.vortec.com
ITW Air Management-Vortec 513-891-7474 http://www.vortec.com
Iverson & Company 847-299-2461 http://iversonandco.com
Iverson & Company 847-299-2461 http://iversonandco.com
Iverson & Company 847-299-2461 http://iversonandco.com
Iverson & Company 847-299-2461 http://iversonandco.com
J.F. Berns Co. 513-851-4600 http://www.jfberns.com
J.F. Berns Co. 513-851-4600 http://www.jfberns.com
J.F. Berns Co. 513-851-4600 http://www.jfberns.com
J.F. Berns Co. 513-851-4600 http://www.jfberns.com
J.W. Done Corp. 510-784-0667 http://www.jwdone.com
James Engineering 303-444-6787 https://www.james-engineering.com
Jergens Inc. 216-486-5540 http://www.jergensinc.com
Jesco Industries Inc. 517-542-2903 http://www.jescoonline.com
Jesco Industries Inc. 517-542-2903 http://www.jescoonline.com
JET 615-793-8900 http://www.jpwindustries.com
JM Performance Products 440-357-1234 http://www.jmperformanceproducts.com
JM Sales 248-879-5984 http://www.jmsales-usa.com
Jorgensen Conveyor and Filtration Solutions 262-242-3089 https://www.jorgensenconveyors.com
Karl Roll GmbH & Co. KG 49-0-70-41-802-0 http://www.karl-roll.de
Kasto Inc. 724-325-5600 http://www.kasto.com
Kaufman Manufacturing Co. 920-686-4114 http://www.kaufmanmfg.com
Kelbros Inc. 920-922-4320 http://www.kelbros.com
Kelbros Inc. 920-922-4320 http://www.kelbros.com
Kelch Inc. 847-459-9600 http://www.kelch.de/en/start/
Kelch Inc. 847-459-9600 http://www.kelch.de/en/start/
Kennametal Inc. 724-539-5000 http://www.kennametal.com
Kennedy Mfg. Co. 800-413-8665 http://buykennedy.com
Kinefac Corp. 508-754-6891 http://kinefac.com
Kitagawa NorthTech Inc. 847-885-5100 http://www.kitagawa.us
Kitagawa NorthTech Inc. 847-885-5100 http://www.kitagawa.us
Kitamura Machinery of USA Inc. 847-520-7755 http://www.kitamura-machinery.com
Klingelhofer Corp. 908-232-7200 http://www.klingelhofer.com
KMT Waterjet Systems Inc. 620-856-2151 http://www.kmtwaterjet.com
Koma Precision Inc. 860-627-7059 http://www.komaprecision.com
Koma Precision Inc. 860-627-7059 http://www.komaprecision.com
KoolBlast by Advanced Industries 734-433-1800 http://www.koolblast.com
KoolBlast by Advanced Industries 734-433-1800 http://www.koolblast.com
Kurt Mfg. Co., Industrial Products Div. 763-574-8309 http://www.kurtworkholding.com
Kyocera Precision Tools 800-823-7284 http://www.kyoceraprecisiontools.com
La-Man Corp. 507-843-4800 http://www.laman.com
LANDS Superabrasives Co. 212-354-4060 http://www.landssuperabrasives.com
LANG Technik USA 262-446-9850 https://lang-technik-usa.com
Laser Mechanisms Inc. 248-474-9480 http://www.lasermech.com
Lawrence Industries Inc. 402-463-3158 http://www.lawrenceindustriesheattreat.com
Lenzkes Clamping Tools Inc. 540-381-1533 http://www.lenzkesusa.com
Liftomatic Material Handling Inc. 847-325-2930 http://www.liftomatic.com
Link Industries, A Link Group Company 231-238-9012 https://linkcuttingtools.com
LMC Workholding 574-735-0225 http://www.lmcworkholding.com
LMT USA Inc. 847-693-3270 http://www.lmtusa.com
Losma Inc. 973-300-1044 http://www.losma.com
LPI Inc. 715-839-8280 http://www.lpi-inc.com
LPI Inc. 715-839-8280 http://www.lpi-inc.com
Lucifer Furnaces Inc. 215-343-0411 http://www.luciferfurnaces.com
Lucifer Furnaces Inc. 215-343-0411 http://www.luciferfurnaces.com
Ludeca Inc. 305-591-8935 http://www.ludeca.com
Ludeca Inc. 305-591-8935 http://www.ludeca.com
Lyndex-Nikken 847-367-4800 https://lyndexnikken.com
Lyndex-Nikken 847-367-4800 https://lyndexnikken.com
Lyndex-Nikken 847-367-4800 https://lyndexnikken.com
Lyndex-Nikken 847-367-4800 https://lyndexnikken.com
Lyndex-Nikken 847-367-4800 https://lyndexnikken.com
Lyndex-Nikken 847-367-4800 https://lyndexnikken.com
Macro Tool & Machine Co. Inc. 845-223-3824 http://www.macrotool.com
Macro Tool & Machine Co. Inc. 845-223-3824 http://www.macrotool.com
Macro Tool & Machine Co. Inc. 845-223-3824 http://www.macrotool.com
Makino Inc. 800-552-3288 http://www.makino.com
Makino Inc. 800-552-3288 http://www.makino.com
Makino Inc. 800-552-3288 http://www.makino.com
Mapa Tools Pvt. Ltd. 91-253-238-3740 http://www.mapatools.com
Marlborough Foundry 508-485-2848 http://www.marlboroughfoundry.com
Masa Tool Inc. 760-732-1422 http://www.masatool.com/
Mastercut Tool Corp. 727-726-5336 http://www.mastercuttool.com
Max Pro Tools Inc. 800-456-0931 http://www.maxprotools.com
Mayfran Intl. 440-461-4100 http://www.mayfran.com
Mayfran Intl. 440-461-4100 http://www.mayfran.com
Mayfran Intl. 440-461-4100 http://www.mayfran.com
MC Machinery Systems Inc. 630-616-5920 https://www.mcmachinery.com/
MD Tooling 810-632-4446 http://www.mdtooling.com
MD Tooling 810-632-4446 http://www.mdtooling.com
Mencom Corp. 770-534-4585 https://www.mencom.com
Mersen USA Inc. 814-781-1234 http://www.edm.mersen.com
Messer Cutting Systems 262-255-5520 http://us.messer-cutting.com
Michigan Deburring Tool 810-227-1000 http://www.mideburring.com
Midaco Corp. 847-593-8420 http://www.midaco-corp.com/
Midaco Corp. 847-593-8420 http://www.midaco-corp.com/
Midwest Industrial Tool Grinding Inc. 320-455-0535 http://www.mitgi.com
Midwest Ohio Tool Co. 419-294-1987 http://www.midwestohio.com
Mikron Tool 203-261-3100 http://www.mikrontool.com
Mikron Tool 203-261-3100 http://www.mikrontool.com
Milwaukee Tool 800-SAWDUST http://www.milwaukeetool.com
Minicut Intl. Inc. 514-352-6464 http://www.minicut.com
Mitsubishi Electric Automation 847-478-2500 https://us.mitsubishielectric.com/fa/en
Mitsubishi Electric Automation 847-478-2500 https://us.mitsubishielectric.com/fa/en
Mitsubishi Materials U.S.A. Corp. 714-352-6100 http://www.mitsubishicarbide.com
Monaghan Tooling Group 937-253-7706 http://www.monaghantooling.com
Montfort Intl. Industrial Products Ltd. 418-877-0778 https://montfort-international.com
New England Die Co. Inc. 203-574-5140 http://www.newenglanddie.com
New England Die Co. Inc. 203-574-5140 http://www.newenglanddie.com
New England Die Co. Inc. 203-574-5140 http://www.newenglanddie.com
noax Technologies 704-992-1606 http://www.noax.com/en
Norseman Drill & Tool 651-227-8911 http://www.norsemandrill.com
Northwestern Tools Inc. 937-298-9994 http://www.northwesterntools.com
Norton | Saint-Gobain Abrasives 800-551-4413 http://www.nortonabrasives.com
NSK America Corp. 847-843-7664 http://www.nskamericacorp.com
NSK America Corp. 847-843-7664 http://www.nskamericacorp.com
NT USA Corp. 615-771-1899 http://www.nttoolusa.com
NT USA Corp. 615-771-1899 http://www.nttoolusa.com
NT USA Corp. 615-771-1899 http://www.nttoolusa.com
NT USA Corp. 615-771-1899 http://www.nttoolusa.com
NT USA Corp. 615-771-1899 http://www.nttoolusa.com
Obsidian Manufacturing Industries Inc. 815-962-8700 http://www.obsidianmfg.com
Obsidian Manufacturing Industries Inc. 815-962-8700 http://www.obsidianmfg.com
Obsidian Manufacturing Industries Inc. 815-962-8700 http://www.obsidianmfg.com
Oerlikon Balzers Coating USA Inc. 847-619-5541 http://www.oerlikon.com/balzers/us
Ohio Tool Works LLC 419-281-3700 http://www.ohiotoolworks.com
OMAX Corporation 253-872-2300 https://www.omax.com/
OMG North America 866-440-8519 http://www.omgamerica.com
OMG North America 866-440-8519 http://www.omgamerica.com
Osborn 765-965-5333 http://osborn.com
Osborn 765-965-5333 http://osborn.com
Pacific Controls EDM 818-345-1970 http://www.pacificcontrols.com
Pacific Controls EDM 818-345-1970 http://www.pacificcontrols.com
Palmgren/CH Hanson 630-848-2000 http://www.palmgren.com
Parlec Inc. 585-425-4400 http://www.parlec.com
Parlec Inc. 585-425-4400 http://www.parlec.com
Particular Technology Inc. 847-625-1602 http://www.particulartechnology.com
PCETCO 888-406-1228 http://www.pcetco.com
PDQ Precision Inc. 619-474-3600 http://www.minimaxcleaner.com
PDQ Precision Inc. 619-474-3600 http://www.minimaxcleaner.com
PFERD Inc. 262-255-3200 http://www.pferd.com
Phase II Machine & Tool Inc. 201-962-7373 http://www.phase2plus.com
Pilot Precision Products 413-350-5200 http://www.pilotprecision.com
Pioneer NA 847-593-6000 http://www.pioneerna.com
Pioneer NA 847-593-6000 http://www.pioneerna.com
Platinum Tooling Technologies Inc. 847-749-0633 http://www.platinumtooling.com
Polygon Solutions Inc. 239-628-4800 http://www.polygonsolutions.com
PRAB 269-382-8200 http://www.prab.com/?utm_source=cutting_tool_engineering&utm_medium=referral&ut…
Pratt Burnerd America 269-384-2225 http://www.prattburnerd.com
Pratt Burnerd America 269-384-2225 http://www.prattburnerd.com
Pratt Burnerd America 269-384-2225 http://www.prattburnerd.com
Precision Brand Products Inc. 630-969-7200 http://www.precisionbrand.com
Precision Devices Inc. 734-439-2462 http://www.predev.com
Precision Devices Inc. 734-439-2462 http://www.predev.com
Precision Spindle Service Co. Inc. 248-544-0100 http://www.spindlerebuilding.com
Precision Tool Technologies Inc. 218-454-0434 http://www.precisiontooltech.com
Predator Software Inc. 503-292-7151 http://www.predator-software.com
Pro Ultrasonics 828-584-1005 http://www.proultrasonics.com
Pro Ultrasonics 828-584-1005 http://www.proultrasonics.com
Pro Ultrasonics 828-584-1005 http://www.proultrasonics.com
Pro Ultrasonics 828-584-1005 http://www.proultrasonics.com
Proceco Ltd. 514-254-8494 https://www.proceco.com/
PTS Group 800-236-6020 https://www.pts-tools.com
PTS Group 800-236-6020 https://www.pts-tools.com
PTS Group 800-236-6020 https://www.pts-tools.com
PTS Group 800-236-6020 https://www.pts-tools.com
PTSolutions 800-236-6020 https://www.pts-tools.com
PTSolutions 800-236-6020 https://www.pts-tools.com
R.S. Precision Industries Inc. 631-249-2600 http://www.rsprecision.com
R.S. Precision Industries Inc. 631-249-2600 http://www.rsprecision.com
Rack Engineering Division 989-340-6564 https://rack-eng.com/products/
Radyne Corp. 414-481-8360 http://www.radyne.com
Radyne Corp. 414-481-8360 http://www.radyne.com
Rani Tool Corp. 865-337-7799 http://www.ranitool.com
Rayco Tools Inc. 574-267-0080 http://www.raycotoolsinc.com
RBR Associates Inc. 630-971-8729 http://www.rbrmachinetools.com
RedLine Tools 763-742-1206 https://www.redlinetools.com/
Rene Swiss Corp. 203-879-4822 http://www.reneswiss.com
Rene Swiss Corp. 203-879-4822 http://www.reneswiss.com
Renishaw Inc. 847-286-9953 http://www.renishaw.com
REV S.R.L. UNIPERSONALE +39-059-858296 https://www.revtool.eu/en
Riten Industries Inc. 740-335-5353 http://www.riten.com
RobbJack Corporation 916-645-6045 http://www.robbjack.com
Rohm Products of America 770-963-8440 http://www.rohm-products.com
Roll-Rite Inc. 815-645-8600 http://www.rollriteinc.com
rose plastic USA LLLP 724-938-8530 http://www.rose-plastic.us
Rosler Metal Finishing USA 269-441-3000 https://us.rosler.com/us-en/contact/
Rosler Metal Finishing USA 269-441-3000 https://us.rosler.com/us-en/contact/
Rosler Metal Finishing USA 269-441-3000 https://us.rosler.com/us-en/contact/
Rotary Systems Inc. 763-323-1514 http://www.rotarysystems.com
Rotary Systems Inc. 763-323-1514 http://www.rotarysystems.com
Rotary Systems Inc. 763-323-1514 http://www.rotarysystems.com
Rousseau Metal Inc. 418-598-3381 http://www.rousseaumetal.com
Royal Machine & Tool Corp. 860-828-6555 http://www.royalworkholding.com
Royal Oak Grinders 315-568-5804 http://www.royaloakgrinders.com
Royal Products 631-273-1010 http://www.royalprod.com
Royal Products 631-273-1010 http://www.royalprod.com
Rush Machinery 585-554-3070 http://www.rushmachinery.com
Saturn Industries 518-828-9956 http://www.saturnedm.com
Sauter North America Inc. 724-207-0900 http://www.sauter-group.us
Sauter North America Inc. 724-207-0900 http://www.sauter-group.us
SCANLAB GmbH +49-89-800746-0 http://www.scanlab.de/en
SCANLAB GmbH +49-89-800746-0 http://www.scanlab.de/en
Schneeberger Inc. 781-271-0140 http://www.schneeberger.com
Schneeberger Inc. 781-271-0140 http://www.schneeberger.com
Schneeberger Inc. 781-271-0140 http://www.schneeberger.com
SCHUNK 919-572-2705 https://www.schunk.com
SCHUNK 919-572-2705 https://www.schunk.com
Schwanog LLC 847-289-1055 http://www.schwanog.com
Seco Tools LLC 248-528-5200 http://www.secotools.com/us
Seco Tools LLC 248-528-5200 http://www.secotools.com/us
Seneca Falls Machines 315-568-5804 http://www.senecafallsmachines.com
Seneca Falls Machines 315-568-5804 http://www.senecafallsmachines.com
Shuster-Mettler Corp. 203-562-3178 http://www.shustermettler.com
Siemens Industry Inc. 847-640-1595 http://www.usa.siemens.com/cnc
Single Phase Power Solutions LLC 877-430-5634 https://singlephasepowersolutions.com
Slater Tools 586-465-5000 http://www.slatertools.com
SLM Solutions 248-243-5400 http://slm-solutions.us/
SmalTec Intl. 630-364-1788 http://www.smaltec.com
Sodick Inc. 847-310-9000 http://www.sodick.com
Solar Atmospheres 215-721-1502 http://www.solaratm.com
Solar Manufacturing Inc. 267-384-5040 http://solarmfg.com
Somma Tool Co. 203-753-2114 http://www.sommatool.com
Sotech Corp. 262-392-8003 http://sotechcorp.com
Southwick & Meister Inc. 203-237-0000 http://www.s-mcollets.com
Southwick & Meister Inc. 203-237-0000 http://www.s-mcollets.com
SPC Innovations Inc. 410-643-1600 http://www.spcinnovations.com
SPC Innovations Inc. 410-643-1600 http://www.spcinnovations.com
Speedgrip Chuck Co. 574-294-1506 http://www.speedgrip.com
Speedgrip Chuck Co. 574-294-1506 http://www.speedgrip.com
Speedgrip Chuck Co. 574-294-1506 http://www.speedgrip.com
Stace-Allen Chucks Inc. 317-632-2401 http://www.stace-allen.com
Star SU LLC 847-649-1450 http://www.star-su.com
Star SU LLC 847-649-1450 http://www.star-su.com
Starrag US Inc. 859-534-5201 http://www.starrag.com
Stor-Loc 815-936-0700 http://www.storloc.com
Striker Systems, Div. of Computer Design 615-672-5132 http://www.strikersystems.com
Structural Machinery Solutions Inc. 812-342-4471 http://www.smscolumbus.com
Sulzer Machine & Mfg. Inc. 715-443-2569 http://www.sulzermachine.com
SupplyPro Inc. 858-587-6400 http://www.supplypro.com
Sure Flow Products LLC 248-380-3569 http://www.flowmetersource.com
T. J. Davies Company Inc. 440-248-5510 https://tjdavies.com
T.M. Smith Tool 586-468-1465 http://www.tmsmith.com
T.M. Smith Tool 586-468-1465 http://www.tmsmith.com
T.M. Smith Tool 586-468-1465 http://www.tmsmith.com
T.M. Smith Tool 586-468-1465 http://www.tmsmith.com
T.M. Smith Tool 586-468-1465 http://www.tmsmith.com
Tapmatic Corp. 208-773-8048 http://www.tapmatic.com
Tapmatic Corp. 208-773-8048 http://www.tapmatic.com
Tapmatic Corp. 208-773-8048 http://www.tapmatic.com
Tapmatic Corp. 208-773-8048 http://www.tapmatic.com
TBI MOTION Technology Co. Ltd. +886-2-2689-2689 http://www.tbimotion.com.tw
TE-CO Mfg. LLC 937-836-0961 http://www.te-co.com
TechMet Carbides 828-624-0222 http://www.techmet.us
Techniks Cutting Tools 317-803-8000 http://www.techniksusa.com
Techniks Cutting Tools 317-803-8000 http://www.techniksusa.com
The Grieve Corp. 847-546-8225 http://www.grievecorp.com
The Grinding Doc 512-934-1857 http://www.thegrindingdoc.com
The Mill-Rose Co. 440-255-9171 http://millrose.com
The Pitbull Clamp Co. Inc. 508-869-0373 http://www.pitbullclamp.com
The UP! App 614-407-8674 https://www.theupapp.com
Thermal Care Inc. 847-966-2260 http://www.thermalcare.com
Thermal Vac Arizona 928-250-6050 https://thermalvacaz.com/
Think & Tinker Ltd. 719-488-9640 http://www.precisebits.com
THK America Inc. 800-763-5459 http://www.thk.com
Thompson Grinders Inc. 920-261-7303 http://www.thompsongrind.com
Titan Conveyors 920-982-6600 http://www.titanconveyors.com
Titan Tool Supply Inc. 716-873-9907 http://www.titantoolsupply.com
Tool Systems Inc. 440-461-6363 http://www.toolsystemsinc.com
Tool Systems Inc. 440-461-6363 http://www.toolsystemsinc.com
Tool-Flo Mfg. Inc. 713-941-1080 http://www.toolflo.com
Toolmex Industrial Solutions 508-653-8897 http://www.toolmex.com
Toolmex Industrial Solutions 508-653-8897 http://www.toolmex.com
Toolmex Industrial Solutions 508-653-8897 http://www.toolmex.com
Transor Filter USA 847-640-0273 http://www.transorfilter.com
Transor Filter USA 847-640-0273 http://www.transorfilter.com
Tri-Mer Corp. 989-723-7838 http://www.tri-mer.com
Tru Tech Systems Inc. 586-469-2700 http://www.trutechsystems.com
Tsugami/Rem Sales LLC 860-687-3400 http://www.remsales.com
Tungaloy-NTK America, Inc. 630-227-3700 https://www.tungaloy.com/us/
Tungco Powder Procurement 270-825-0000 https://tungco.com
U.S. Tool Group 573-431-3856 http://www.ustg.net
UNIMOVE LLC 610-826-7855 http://www.unimove.com
UNISIG 262-252-3802 http://www.unisig.com
UNISIG 262-252-3802 http://www.unisig.com
Unist Inc. 616-949-0853 http://www.unist.com
United Precision Services 513-851-6900 http://www.unitedprecisionservices.com
Universal Grinding Corp. 216-631-9410 http://www.universalgrinding.com
Universal Grinding Corp. 216-631-9410 http://www.universalgrinding.com
Vargus USA 608-756-4930 http://www.vargususa.com
Vargus USA 608-756-4930 http://www.vargususa.com
Vernon Devices Inc. 914-633-0038 http://www.vernondevices.com
Vernon Devices Inc. 914-633-0038 http://www.vernondevices.com
Versa Pullers 574-266-0780 https://versapullers.com
Vesconite Bearings 713-574-7255 http://www.vesconite.com
Viking Drill & Tool Inc. 651-227-8911 http://www.vikingdrill.com
Viking Drill & Tool Inc. 651-227-8911 http://www.vikingdrill.com
Vision Research Inc. 973-696-4500 http://www.phantomhighspeed.com
VisiPak, a Sinclair & Rush Co. 636-282-6800 http://www.visipak.com
VisiPak, a Sinclair & Rush Co. 636-282-6800 http://www.visipak.com
Vollmer of America 412-278-0655 http://www.vollmer-group.com
Walter USA LLC 800-945-5554 https://www.walter-tools.com/en-us/pages/default.aspx
Walter USA LLC 800-945-5554 https://www.walter-tools.com/en-us/pages/default.aspx
Walter USA LLC 800-945-5554 https://www.walter-tools.com/en-us/pages/default.aspx
Walter USA LLC 800-945-5554 https://www.walter-tools.com/en-us/pages/default.aspx
WARDJet Inc. 330-677-9100 http://www.wardjet.com
Watkins Mfg. Inc. 513-563-0440 http://www.saw-lutions.com
Weiler Abrasives 570-595-7495 http://www.weilerabrasives.com
Weiler Abrasives 570-595-7495 http://www.weilerabrasives.com
WEIMA America Inc. https://weima.com/us/
Weldcote 704-739-4115 https://weldcotemetals.com/
Winslow Eng. Inc. 920-921-6404 http://www.winsloweng.com
Wm. Sopko & Sons Co. 216-289-1400 http://www.wmsopko.com
Wm. Sopko & Sons Co. 216-289-1400 http://www.wmsopko.com
Wm. Sopko & Sons Co. 216-289-1400 http://www.wmsopko.com
Wm. Sopko & Sons Co. 216-289-1400 http://www.wmsopko.com
Wm. Sopko & Sons Co. 216-289-1400 http://www.wmsopko.com
YG-1 USA 847-634-3700 http://www.yg1usa.com
Zagar Inc. 216-731-0500 https://www.zagar.com
Zebra Skimmers Corp. 440-349-0141 http://www.zebraskimmers.com
Zhejiang Xinhai Valve Manufacturing Co. Ltd. 86-577-66993222 https://www.xhvalves.com/
ZOLLER Inc. 734-332-4851 http://www.zoller.info/us
ZOLLER Inc. 734-332-4851 http://www.zoller.info/us
ZOLLER Inc. 734-332-4851 http://www.zoller.info/us
ZOLLER Inc. 734-332-4851 http://www.zoller.info/us

Sponsored Content