Ask CTE Contributors about Micromachining

Published Date
August 24, 2023 - 12:00:am

The webinar, which is based on the "Tiny Drillers" feature published in the August issue of Cutting Tool Engineering magazine, delves deeper into the products and strategies recommended for deep-hole microdrilling by Kennametal Inc. and Sandvik Coromant Co. In addition, a representative from MAQ AB discussed the company's vibration-damped turning tool that is 8 mm in diameter, which was the subject of a sidebar to the main feature article in CTE's August issue.

Related Glossary Terms

  • turning


    Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.


Join us for an exclusive webinar led by industry veteran Tom Kowalski, Regional Manager for EMUGE-…

Cutting Tool Engineering is happy to announce the launch of Bourbon With The Editor, a new video…

Join us for the pilot episode of Bourbon With The Editor, featuring Erez Speiser, a mechanical…