Tungaloy’s TungFeed-Blade is an extremely rigid modular blade series for grooving and parting applications. TungFeed-Blade consists of a triangular CHGP style modular blade with three insert pockets which holds a CHTBR/L robust style tool block. Intended for high feed grooving and parting, the TungFeed-Blade system extends insert life, improves surface finish, and part straightness, while significantly reducing cycle time.
The Weifuautocam Precision Machinery Corporation from Wuxi, China is using a Grindstar profile and cut-off machine from Junker for the production of adjusting screws for high-pressure hydraulic pumps. Weifuautocam, a part of the Weifu Group, began collaborating with Junker in 2000.
The manufacturing sector is experiencing a major transition worldwide due to major advancements in technology. At present, as Industry 4.0 continues to make inroads across a range of manufacturing facilities worldwide, the digitization trend has set its foot into steel production– a factor that is positively impacting the long rolling space. The demand for cut-to-length line systems is witnessing significant growth, as steel producers continue to rope in significant efforts to fulfill the consumer demand for on-time delivery and product requirements while simultaneously running a lean operation.
The Walter Cut MX grooving and parting tool improves accuracy, stability and process reliability by improving on proven technology. The self-aligning, tangential clamping of the MX system and the dowel pin location in its insert seat result in greater precision and repeatability. Inserts are offered in five different geometry types with Tiger∙tec® Silver PVD coating for grooving, parting, profiling and thread turning.
Sept. 25 marked 39 years to the day since I first stood in front of a Hardinge hand screw, scratching my head over the knobs and handles and wondering what I’d gotten myself into. To say that machine tools have improved since then is like saying this year’s computers are only slightly more powerful than those of a decade ago or that salted caramel ice cream is marginally more flavorful than vanilla. Today’s machine tools rock.
Although marginally faster tooling options had become available, David Turk at BUCHER Emhart Glass was reluctant to change from a tried-and-true parting off tool. But a new product that tripled productivity finally triggered a switch.
Cutting Tool Engineering's July 2022 issue will focus on how shops can meet demand for stringent boring operations. Bores must be machined with micron accuracy and maintain critical tolerances in low- and high-volume manufacturing applications. New digital solutions in boring and machine tool systems are set to transform industrial production. To supplement this report online, CTE will address some of these solutions during its Ask The Experts webinar scheduled for 10 a.m. (CDT) on Wednesday, July 20th.
At every stage of manufacturing, there is an opportunity for automation. Unfortunately, many manufactures often let perceived barriers keep them from implementing complete machine or process automation. With this mindset, they end up limiting their productivity by automating only one or two aspects of the process or not automating at all.
At the U.S. transmission plant of a global automotive manufacturing group, component inspection times have been reduced by half or more by upgrading the company’s coordinate measuring machines (CMMs) to incorporate 5-axis scanning technology in addition to touch probing.
Tools today are far superior to those used in previous firearm production methods, which provides the opportunity to combine operations into a single cutting tool, eliminating the need for additional tooling in the machine shop.
Machining titanium cost-effectively requires special attention to the distinctive features of this material – particularly for choosing the right tools.
Improved productivity, increased production capacity, better quality and lower costs were the demands of a leading garden tool manufacturer when they invested in a mass finishing system for deburring and polishing of garden shear knives. Rösler met this challenge.
While a user may encounter several challenges when machining threads, asking five questions can aid in building the foundation for a successful application.
While a user may encounter several challenges when machining threads, asking five questions can aid in building the foundation for a successful application.
Keeping up with technology advances means keeping CNC equipment up-to-date, which allows injection molding companies to accept jobs that they might ordinarily have to decline.
Keeping up with technology advances means keeping CNC equipment up-to-date, which allows injection molding companies to accept jobs that they might ordinarily have to decline.
Branding for Gorilla Mill, a manufacturer of carbide drills, endmills and cutting tools, is simian-themed, aggressive and fun, and it comes with the tagline “Weapons of Mass Production.” The company has grown in employees, distributors and a diverse spread of customers. ANCA's CNC machines have played a large role in Gorilla Mill's progress.
Branding for Gorilla Mill, a manufacturer of carbide drills, endmills and cutting tools, is simian-themed, aggressive and fun, and it comes with the tagline “Weapons of Mass Production.” The company has grown in employees, distributors and a diverse spread of customers. ANCA's CNC machines have played a large role in Gorilla Mill's progress.
Fast, flexible custom tooling, easy access to tool data through cloud technology and automation are some of the technologies driving tool production processes, according to a recent discussion between two industry executives.
Fast, flexible custom tooling, easy access to tool data through cloud technology and automation are some of the technologies driving tool production processes, according to a recent discussion between two industry executives.
Choosing the right tools, and determining the right tool calculations, is vital to overcome diversification challenges and developing new revenue streams.
Micrometal's photochemical etching process enables ultraprecise contours to take shape and produces metal parts with unique features and a greater level of complexity.
For the Austria-based Wittmann Battenfeld company, it's all about plastic. The company utilizes a modern, diverse and modular range of machines for processing plastics and other plasticisable materials, including the M30 Millturn from WFL Millturn Technologies.
For the Austria-based Wittmann Battenfeld company, it's all about plastic. The company utilizes a modern, diverse and modular range of machines for processing plastics and other plasticisable materials, including the M30 Millturn from WFL Millturn Technologies.
Global trends toward reducing carbon footprint and operational costs as well as the push for high-precision processing tools have led to increasing demand for compact laser systems that can be implemented in processing plants and production lines.
Auto parts manufacturer SB Dezigns in North East, Maryland, has implemented a new end mill and chuck solution that helped them save 62% in costs on a recent application.
Many TNC functions of Heidenhain controls offer possible solutions to the conflicting demands of a production process that is simultaneously precise and efficient. Here is a look at some of those functions.
The Weifuautocam Precision Machinery Corporation from Wuxi, China is using a Grindstar profile and cut-off machine from Junker for the production of adjusting screws for high-pressure hydraulic pumps. Weifuautocam, a part of the Weifu Group, began collaborating with Junker in 2000.
The Weifuautocam Precision Machinery Corporation from Wuxi, China is using a Grindstar profile and cut-off machine from Junker for the production of adjusting screws for high-pressure hydraulic pumps. Weifuautocam, a part of the Weifu Group, began collaborating with Junker in 2000.
Seco Tools plans to make a strong contribution to the circular economy with an ambitious recycling goal while at the same time continuing to make reliable tooling.
The ultimate accuracy and reliability of a machine tool depends in no small degree on the alignment checking during its assembly. Seeking an alternative to traditional error measurement techniques, Hurco Manufacturing Ltd. (Hurco) chose Renishaw’s XK10 alignment laser system to increase both precision and throughput of its machine tools..
The Schaller Group, a Michigan-based metal forming company, invested in CNC technology to drive growth in the family-owned company and support the company principle's passion for hydroplane racing.
Boulevard Machine & Gear, a gear-cutting shop founded in 1954 to serve the paper industry in the Pioneer Valley of Massachusetts, began a period of modernization and investment with the 2006 acquisition of the company by Susan Kasa. Kasa’s focus was to grow the company and become more efficient. One issue of concern dealt with completing certain machining jobs with conventional side-lock and collet holders. To solve this problem, the company invested in a Haimer Power Clamp Special Edition shrink fit machine, Haimer Standard Shrink chucks, Haimer Power Shrink chucks and extensions.
Aluminum, with its many advantageous properties, is used in a wide spectrum of industries to manufacture a vast, and growing, range of products. As the use of aluminum is so varied, so are its' traceability requirements.
Unlike machining other materials, machining stainless steel requires review of myriad aspects prior to beginning work in the machine shop. While machining stainless has unique challenges, its benefits outweigh those challenges.
Deburring and finishing are still predominantly manual processes for many manufacturers and job shops. However, the results can be inefficient and inconsistent. Automating these processes can solve these problems.
Deburring and finishing are still predominantly manual processes for many manufacturers and job shops. However, the results can be inefficient and inconsistent. Automating these processes can solve these problems.
Machining medical components cost-effectively and reliably requires high-precision tools that have been tested in practice to meet specifications that often reaches the micron level. Tool manufacturer, Inovatools, offers the Inomed range of tools for this application.
Machining medical components cost-effectively and reliably requires high-precision tools that have been tested in practice to meet specifications that often reaches the micron level. Tool manufacturer, Inovatools, offers the Inomed range of tools for this application.
Machining medical components cost-effectively and reliably requires high-precision tools that have been tested in practice to meet specifications that often reaches the micron level. Tool manufacturer, Inovatools, offers the Inomed range of tools for this application.
Wisconsin-based Integrity Saw & Tool Inc. purchased a Vollmer CHX 840 circular saw blade sharpening machine with the Vollmer HS automated loading station to increase capacity to meet the demand from a new pallet manufacturing customer.
Fewer than 30% of manufacturers have extensively adopted Industry 4.0 technologies, according to findings published in a new report, but manufacturers’ reluctance to go digital might have to change if they are to adapt to an unpredictable future. Sandvik Coromant's testing finds that an increase in machine utilization can result in a higher gross profit margin.
Fewer than 30% of manufacturers have extensively adopted Industry 4.0 technologies, according to findings published in a new report, but manufacturers’ reluctance to go digital might have to change if they are to adapt to an unpredictable future. Sandvik Coromant's testing finds that an increase in machine utilization can result in a higher gross profit margin.
Five trends have helped triple the number of annual installations of industrial robots within ten years (2010-2019) reaching 381 thousand units in factories around the world.
Utilizing intelligent and adaptive control and monitor technology, ANCA CNC Machines has developed a new electro discharge grinding (EDG) machine that monitors and controls sparks and the erosion gap to decrease cycle times for PCD tools by 50%.
Holemaking is a common procedure in any machine shop, but selecting the best type of cutting tool for each job is not always clear. Should a machine shop use solid or insert drills? Here are 5 ways to make that decision
In the past decade, a California-based machine shop has relied on a flexible, honing tool for a range of automated CNC machining applications such as cross hole deburring, cylindrical honing, surface finishing, edge-blending and cleaning.
Using a Vicivision optical measuring machine to verify quality during grinding and other operations, Italy-based Bavieri Alfeo Precision Mechanics can obtain accurate results in seconds .
Voestalpine Rotec GmbH, a global leader in the manufacture of precision steel pipes and tubes, integrated an automated Rösler drag finishing system, the R 4/700 SF, that doubled the usable life of stamping tools.
After a long hiatus due to the COVID-19 pandemic, the Grinding Doc video series on Cutting Tool Engineering's website resumes with a special two-hour episode about Cylindrical Master 2020, an Excel program developed by Dr. Jeffrey Badger, aka the Grinding Doc. The 105th episode of the Grinding Doc video series provides a detailed description of the Cylindrical Master program that Badger developed during the pandemic.
Starrag is a manufacturer high-precision machine tools for milling, turning, boring and grinding workpieces for a variety of industries. Its rigid and robust equipment can also be used for making farming equipment.
Starrag is a manufacturer high-precision machine tools for milling, turning, boring and grinding workpieces for a variety of industries. Its rigid and robust equipment can also be used for making farming equipment.
ASCO Power Technologies, which manufactures automatic transfer switches, switchgear and other power management products, solved manufacturing issues by integrating Jetcam Expert nesting software throughout its facility.
ASCO Power Technologies, which manufactures automatic transfer switches, switchgear and other power management products, solved manufacturing issues by integrating Jetcam Expert nesting software throughout its facility.
Fast turnaround times and increasingly complex components are standard requirements in the mold industry.. To meet these growing customer demands with the greatest possible efficiency, high-performance 5-axis machining centers are a must for manufacturers.
Fast turnaround times and increasingly complex components are standard requirements in the mold industry.. To meet these growing customer demands with the greatest possible efficiency, high-performance 5-axis machining centers are a must for manufacturers.
Investing in CNC Swiss technology allows a shop to perform threading operations. Every Swiss machinist should be aware of the latest advancements in this field.
Investing in CNC Swiss technology allows a shop to perform threading operations. Every Swiss machinist should be aware of the latest advancements in this field.
Lasers are used in a myriad number of applications to cut, drill, weld, mark, or structure parts in a wide variety of applications in many industrial sectors to optimize manufacturing processes and satisfy the need for ever increasing quality of components.
Inovatools USA LLC in Hartland, Michigan, offers a broad product range of high-performance solid carbide mills that meet the exacting requirements in mold, fixture and die manufacturing.
Many machine shops are losing tens of thousands of dollars in company profits each year by not implementing quick-change tooling on mills and lathes. Implementing this technology can easily reduce downtime an hour a day.
A new paper by Forest City Gear engineer Andrew F. Vincent, Ph.D., has been released entitled, A Note on the Design of the Gap Between Helices on a Double-helical Gear. The paper focuses on how the design and how it “imposes a necessary lower bound on the gap between the helices it is meant to produce.”
Wear pads between the saddle and the machining bed on lathes and CNC machines are being replaced with a wear-resistant polymer known as Vesconite Hilube
More than a third of manufacturers say the Covid-19 pandemic is a catalyst for increasing automation, and additional drivers for adding and expanding automation include the need for increased productivity and a shortage of skilled workers, according to a new survey from MC Machinery of Elk Grove Village, Illinois.
With new advances in abrasive technology, machining center operators are able to complete surface finishing simultaneously with other machining operations, to speed cycle times, improve quality and save on off-line finishing time and costs. The abrasive finishing tools can be easily integrated into CNC machines carousels or tool holding systems.
Don Schumacher Motorsports (DSM) is one of the country’s most successful motorsports companies, both on and off the track. Tooling from Sandvik Coromant helped the company achieve some impressive goals.
Since the onslaught of the coronavirus pandemic, manufacturers have dealt with supply chain issues. In this Q&A, two industry leaders discuss the pandemic, the supply-chain and bringing manufacturing back to U.S. shores.
At Emuge-Franken, manufacturers of threading, gaging, clamping and milling technology, sensors and dynamometers from Kistler are used to aid in the development of new precision tools.
Grinding jobs requires strict tolerances. On grinding machines, the tolerances for the dimensions, form and position of finishing processes run tight, and in many cases, shops check these specifications against hard data. Studer machines can use cameras and laser systems to in-process measurements.
Grinding jobs requires strict tolerances. On grinding machines, the tolerances for the dimensions, form and position of finishing processes run tight, and in many cases, shops check these specifications against hard data. Studer machines can use cameras and laser systems to in-process measurements.
The tool and mold industry is designing and specifying ever more complex geometries and freeform surfaces and the industry is placing ever greater demands on clamping technology to accomplished these needs. Zero-point clamping technology from Andreas Maier Fellbach (AMF).helps them meet these challenges.
The ThyssenKrupp Crankshaft Co. in Danville, Illinois, operates up to 21 shifts per week to produce forged crankshafts for the North American heavy-duty automotive, truck, and engine markets. Meeting production needs requires precise technology, including a Zema Numerika GH1500 grinding machine from Junker.
The fourth Industrial Revolution promises new efficiencies and productivity gains for manufacturers. Machine tool suppliers are integrating Industry 4.0 capabilities and software companies that are providing powerful new tools such as those that utilize artificial intelligence. CAM software from ESPIRIT from DP Technology offers features to drive production improvement.
The fourth Industrial Revolution promises new efficiencies and productivity gains for manufacturers. Machine tool suppliers are integrating Industry 4.0 capabilities and software companies that are providing powerful new tools such as those that utilize artificial intelligence. CAM software from ESPIRIT from DP Technology offers features to drive production improvement.
Whether operators use neat oils or water-miscible coolants in wet cutting machine tools or tool grinding machines, the coolants are subject to heavy contamination. VOMAT technology offers a variety of clean coolant technology to solve this problem and produce better cuts.
Whether operators use neat oils or water-miscible coolants in wet cutting machine tools or tool grinding machines, the coolants are subject to heavy contamination. VOMAT technology offers a variety of clean coolant technology to solve this problem and produce better cuts.
Omni Aerospace needed to produce large, flight-ready parts within strict design tolerances and surface finishes in a time-sensitive manner. Starrag's Ecospeed F1540 machining centers fit the bill.
Omni Aerospace needed to produce large, flight-ready parts within strict design tolerances and surface finishes in a time-sensitive manner. Starrag's Ecospeed F1540 machining centers fit the bill.
When considering upgrading a cylindrical grinding process from a conventional vitrified aluminum oxide or ceramic wheel to Vitrified cBN (VitcBN), there are 5 main reasons that can help justify the use of cBN over conventional abrasive grains.
Sam Roberts has more than two decades of experience in programming and manual and CNC skills, but still remembers the day in 1999 when he was introduced to Mastercam CAD/CAM software (CNC Software Inc., Tolland, Connecticut). As a machinist proficient in G-code, Roberts was impressed with the software.
Sam Roberts has more than two decades of experience in programming and manual and CNC skills, but still remembers the day in 1999 when he was introduced to Mastercam CAD/CAM software (CNC Software Inc., Tolland, Connecticut). As a machinist proficient in G-code, Roberts was impressed with the software.
In 1928, a precision optics machine arrived on U.S. shores on a ship from Europe. The SIP MP4 machine, serial number 88, was bound for its new home at the General Electric plant in Lynn, Massachusetts, a town located 14 miles northeast of Boston. Today, it is home at the U.S. offices of Starrag in Hebron, Kentucky.
In 1928, a precision optics machine arrived on U.S. shores on a ship from Europe. The SIP MP4 machine, serial number 88, was bound for its new home at the General Electric plant in Lynn, Massachusetts, a town located 14 miles northeast of Boston. Today, it is home at the U.S. offices of Starrag in Hebron, Kentucky.
Fastems Group will host an online Open House & Conference entitled "Productivity Beyond Machine Tending" that will showcase the latest developments in automation and surrounding technologies.
The F-35 Lightning is one of the most complex and lethal combat fighter jets in the world, and this machine is constructed with thousands of precision components. Starrag machinery are used to produce some of the most complex components on these precision jets.
Contract programming houses are an excellent resource for shops with overloaded programming departments, a troublesome project, or are venturing into five-axis territory for the first time. Ron Branch, vice-president of 5th Axis CG Inc. shared valuable insights about machining optimization with Gene Granata, Vericut product manager at CGTech.
When it comes to designing, CAD software has its place, but purchasing and maintaining multiple CAD licenses can be expensive. Kisters offers a solution for supplying CAD to multiple users.
When it comes to designing, CAD software has its place, but purchasing and maintaining multiple CAD licenses can be expensive. Kisters offers a solution for supplying CAD to multiple users.
The Bell Helicopter Drive Systems Center (DSC) in Arlington, Texas, can never be confused with anything “little.” It’s a huge facility, filled with the latest milling, drilling, and boring technologies. In fact, some newly installed equipment is making some of the company's biggest components in its history.
The Bell Helicopter Drive Systems Center (DSC) in Arlington, Texas, can never be confused with anything “little.” It’s a huge facility, filled with the latest milling, drilling, and boring technologies. In fact, some newly installed equipment is making some of the company's biggest components in its history.
The Bell Helicopter Drive Systems Center (DSC) in Arlington, Texas, can never be confused with anything “little.” It’s a huge facility, filled with the latest milling, drilling, and boring technologies. In fact, some newly installed equipment is making some of the company's biggest components in its history.
The Bell Helicopter Drive Systems Center (DSC) in Arlington, Texas, can never be confused with anything “little.” It’s a huge facility, filled with the latest milling, drilling, and boring technologies. In fact, some newly installed equipment is making some of the company's biggest components in its history.
This webinar is based off an issue in the September 2024 issue of CTE. Ask ahead of time: Register now to submit your questions to be answered during the webinar!
Millstar's EIV5 Series is revitalizing conventional practices for the modern machine shop. The EIV5 provides a unique combination of radial grind, variable helix, variable pitch and radius preparation for maximum versatility and surgical precision. EIV5 offers exceptional performance with high temperature alloys like titanium, making it an ideal choice for diverse machining applications including medical and aerospace.
Join us for an insightful webinar featuring Genevieve Swiss Industries Inc., with expert Scott LaPrade, Applications Supervisor. Dive into the innovative world of rotary broaching and learn about the latest advancements and techniques revolutionizing polygon machining. Whether you're looking to enhance your existing skills or gain new insights into this specialized area, this webinar is a must-attend event for machining professionals seeking to stay at the forefront of their field.
Don’t miss our discussion with Vargus USA about their cutting-edge MilliPro product. This advanced solution for small diameter thread milling can revolutionize your threading operations. Tune in for an insightful discussion and discover how this technology can enhance your manufacturing processes!
Welcome to a special series of 'Bourbon with the Editor' where we sit down with the legendary Jeffrey Badger, also known as The Grinding Doc, celebrated for his groundbreaking contributions to grinding technology and his engaging approach. Join us as we explore Jeffrey's remarkable journey—from his early fascination with grinding to becoming a global authority in the field.
Experience maximum productivity and turning efficiency with Tungaloy’s TurnFeed on steel. Engineered with a unique cutting edge for high-feed machining, this tool boasts double clamping technology for unparalleled rigidity and performance. The WPMT-ML Trigon insert with ML chipbreaker minimizes cutting force, while producing thin, manageable chips. Perfect for a broad range of applications, from roughing to finishing, thanks to its high versatility and resistance to wear and chipping. Transform your machining process today.
Join us for an Ask CTE Contributors webinar led by industry veteran Tom Kowalski, Regional Manager for EMUGE-FRANKEN USA, when he provides invaluable insights on "Avoiding Tap Breakage with These Five Tips". Designed for manufacturers spanning all industries, this webinar will delve into the intricacies of tap selection, drilling considerations, and crucial decision-making that EMUGE-FRANKEN uses for optimizing thread quality and tool life – and avoiding the dreaded broken tap!
Register to watch the recorded webinar on-demand. Join Cutting Tool Engineering for a one-hour webinar based on this month’s cover story, “A Fluid Choice.” The article examines the options for high-pressure coolant when deep-hole drilling.
Take advantage of discounted pricing and special offers on all of our best-performing milling, grooving, turning, parting, threading, and drilling tools!
Take advantage of discounted pricing and special offers on all of our best-performing milling, grooving, turning, parting, threading, and drilling tools!
Take advantage of discounted pricing and special offers on all of our best-performing milling, grooving, turning, parting, threading, and drilling tools!
Take advantage of discounted pricing and special offers on all of our best-performing milling, grooving, turning, parting, threading, and drilling tools!
Sold by Germany-headquartered Chiron Group, the refrigerator-size Micro5 machining center is designed to machine small and delicate parts for industries like medical, jewelry, watchmaking and electronics. The five-axis machine can handle workpiece sizes up to 50 mm x 50 mm x 50 mm.
The webinar, which is based on the "Tiny Drillers" feature published in the August issue of Cutting Tool Engineering magazine, delves deeper into the products and strategies recommended for deep-hole microdrilling by Kennametal Inc. and Sandvik Coromant Co. In addition, a representative from MAQ AB discussed the company's vibration-damped turning tool that is 8 mm in diameter, which was the subject of a sidebar to the main feature article in CTE's August issue.
Not all titanium is alike. Depending on whether it is pure titanium or alloyed titanium, the chip removing process behavior differs. For these challenges, Mikron Tool has developed drills tailored to specific titanium grades that can machine titanium safely — with higher cutting performance results, longer tool lives and excellent hole quality. The webinar, which is presented by Clive Komlenic, sales director, East, for Mikron Tool, addresses chip formation, torque, material properties, overheating and Mikron’s latest state-of-art drill series technologies aimed at machining titanium.
During Eastec 2023, Kevin Swint, territory sales representative for VEKTEK, highlighted the company's new Auto-Coupler device for automating the hydraulic connection from the power supply to a workholding fixture, as well as VEKTEK's Advanced Automation Workholding Pump.
Guhring Inc., which featured several product lines at its booth during Eastec 2023, reviewed the company's newest offerings for drills, endmills, thread mills, taps, grooving tools, and a tool management vending solution.
In addition to featuring its Cut F 600 wire EDMing machine and Mill S 200 U five-axis linear drive machine, GF Machining Solutions highlighted the micromachining capabilities of its Microlution product line.
Craig Fischer, plant manager for JM Performance Products Inc., highlighted some of the company's newer products, including BT30 retention knobs, that were on display at the company's booth during Eastec 2023.
CTE Publisher Dennis Spaeth asks MIKRON Tool's Clive Komlenic, sales director, East, about the company's new micro milling tool, the CrazyMill Cool Micro. The new cutter is said to answer their customer's desire for a micro tool that displayed a lot of the same characteristics as MIKRON's larger mills that start at 1 mm.
Martin Dillaman, global manager of engineering/applications for Greenleaf Corp., recaps and takes questions regarding "Making the Grade," a feature article published in the April 2023 issue of Cutting Tool Engineering magazine that discusses how the use of the right carbide inserts helps overcome any issues that might arise when rough turning steel.
Join Cutting Tool Engineering and UNISIG CEO Anthony Fettig for a 30-minute webinar based on an article in the March 2023 issue of CTE magazine that offers a detailed overview of what deep hole drilling entails.
Take advantage of discounted pricing and special offers on select tools across our milling, drilling, turning, and grooving lines. Boost productivity, simplify tool inventory, and decrease downtime with Tungaloy’s ADDForce accelerated lines. Headquartered in Japan, we provide our products to customers all over the world in automobile, construction, aerospace, medical, power generation, infrastructure, and heavy industries.
AddMultiTurn – Front turning, back turning, profiling, and face turning with ONE SINGLE TOOL. Tungaloy's 6-corner inserts with the company's ultra-secure Y-PRISM clamping design for high versatility, economy, and productivity. Available in 80° or 35° corner angle.
Cutting Tool Engineering's July 2022 issue will focus on how shops can meet demand for stringent boring operations. Bores must be machined with micron accuracy and maintain critical tolerances in low- and high-volume manufacturing applications. To supplement this report online, CTE will address some of these solutions during its Ask The Experts webinar scheduled for 10 a.m. (CDT) on Wednesday, July 20th. The Ask The Experts panel will consist of Rigibore Inc. President Anthony Bassett and BIG DAISHOWA Inc. Senior Product Specialist Matt Tegelman.
Marzel Neckien, president of W Machine Works, San Fernando, California, invested in smart machine monitoring from FactoryWiz that enabled the shop to collect raw machine data and better understand what was happening on their shop floor.
Rollomatic USA and Strausak featured two new tool grinding machines during its three-day open house held Nov. 9-11 at Rollomatic's Mundelein, Illinois, facility.
Rollomatic USA and Strausak featured two new tool grinding machines during its three-day open house held Nov. 9-11 at Rollomatic's Mundelein, Illinois, facility.
Rollomatic USA and Strausak featured two new tool grinding machines during its three-day open house held Nov. 9-11 at Rollomatic's Mundelein, Illinois, facility.
In addition to showing off the company's new AutoMarkX automated laser etching machine, ANCA CNC Machines President Russell Riddiford highlights new features of its FX7 Linear machine for medium to light manufacturing.
In addition to showing off the company's new AutoMarkX automated laser etching machine, ANCA CNC Machines President Russell Riddiford highlights new features of its FX7 Linear machine for medium to light manufacturing.
Marubeni Citizen-Cincom Inc. Applications Engineer James Sabatino visits with Cutting Tool Engineering Publisher Dennis Spaeth, who visited the company's booth during EASTEC 2021 to learn more about the Miyano BNE-MYY fixed headstock type CNC automatic lathe.
Gorilla Mill President and Owner Kevin Cranker offers Cutting Tool Engineering a quick tour of the company's booth at EASTEC 2021, highlighting two new Gorilla Mill lines: the Arsenal' lines during Cutting Tool Engineering's EASTEC 2021 booth visit. Cranker begins the tour by featuring the company's new Arsenal line of Picatinny cutters along with a new line of Lemur chamfering mills.
For Cutting Tool Engineering's EASTEC 2021 booth visit with Mikron Tool, Regional Sales Manager Clive Komlenic talks about the company's new CrazyMill Cool Plunge & Slot square and corner radius mill as well as its new line of small diameter micro mills (0.2 to 0.9 mm three-flute and 0.4 to 0.9 mm four-flute).
For Cutting Tool Engineering's EASTEC 2021 booth visit with Mikron Tool, Regional Sales Manager Clive Komlenic talks about the company's new CrazyMill Cool Plunge & Slot square and corner radius mill as well as its new line of small diameter micro mills (0.2 to 0.9 mm three-flute and 0.4 to 0.9 mm four-flute).
AutoMarkX is an automatic stand-alone laser marking station replacing manual and labour-intensive processes. It is AIMS compatible which means it could work in a fully automatic mode without human intervention, if required.
This short video showcases the new TURNPWR control as a workshop-oriented turning control that enables the user to program conventional machining operations right at the machine in an easy-to-use conversational programming language. It is designed for turning machine tools with up to two axes.
Beckett Packaging manufactures and stocks a full range of Round Telescopic Plastic Tubes. Durable, reusable and resistant to moisture, this packaging will allow for storage of various tool lengths.
The CERATIZIT WTX-HFDS solid carbide drill with Dragonskin coating achieves new levels of quality, hole tolerance, and positioning accuracy, with low burr formation while entering and exiting the hole. The core stability of the drill is retained with optimum cooling via four internal spiral coolant holes making the drilling process safe and effective.
Sandvik Coromant offers a deep hole drilling strategy using its CoroDrill 861-GP and 861-GM drills in this brief video supplement to "A Happy Medium," a feature article in the October 2021 issue of Cutting Tool Engineering that delves into effectively drilling austempered ductile iron.
YG-1 USA's new FM10 PNMU face milling platform, which is featured in this brief video demonstration, combines multi-corner face milling performance with high-feed capabilities.
Designed for extreme drilling in steels, Guhring’s RT100 XF drill family delivers. The carbide grade developed for the RT100 XF balances hardness and toughness.
Tri-V Tool and Manufacturing Co. doesn't turn down work or shy away from challenging parts. To meet customer demands, they’ve added more-sophisticated and advanced horizontal machining centers, an automated pallet system and multi-tasking part processing from Mazak.
The ORBITOOL® deburring tool is designed for in-process deburring of crossholes. The flexible shank and protective ring enable a unique cutting action that automatically protects all critical surfaces, while selectively removing material only at the burred intersection edge.
Tungaloy’s TungFeed-Blade is an extremely rigid modular blade series for grooving and parting applications. TungFeed-Blade consists of a triangular CHGP style modular blade with three insert pockets which holds a CHTBR/L robust style tool block. Intended for high feed grooving and parting, the TungFeed-Blade system extends insert life, improves surface finish, and part straightness, while significantly reducing cycle time.
Star Cutter’s NXT 5-axis Tool Grinder is a versatile 5-axis CNC machine, features a small footprint and a large grind zone. The machine can run small and large diameter wheels and is designed in a modular fashion that offers quick adaptation to application requirements.
Tungaloy’s TungFeed-Blade is an extremely rigid modular blade series for grooving and parting applications. TungFeed-Blade consists of a triangular CHGP style modular blade with three insert pockets which holds a CHTBR/L robust style tool block. Intended for high feed grooving and parting, the TungFeed-Blade system extends insert life, improves surface finish, and part straightness, while significantly reducing cycle time.
Watch 2D Adaptive clearing paired with SwiftCARB's coolant through AV series Rampmill rip through aircraft grade aluminum @ 375 IPM on a Haas VF2-SS. ALL of our tools are proudly made in the USA.
Two technologies, one machine: The new VOLLMER VHybrid 360 combines the strengths of an innovative grinding machine and a proven powerful erosion machine. Allowing you to switch between the two functions in no time! Efficient processing and powerful machining of carbide tools with diameters of up to 50 mm.
Two technologies, one machine: The new VOLLMER VHybrid 360 combines the strengths of an innovative grinding machine and a proven powerful erosion machine. Allowing you to switch between the two functions in no time! Efficient processing and powerful machining of carbide tools with diameters of up to 50 mm.
CNC Software Inc., Helical Solutions LLC and Makino Inc. — a software developer, cutting tool maker and machine builder, respectively — share the results of their joint R&D project that began with an email introducing a new high-efficiency six-flute endmill with a chipbreaker. This report is a video supplement to the Get With The Program column in the August 2021 issue of Cutting Tool Engineering magazine.
CNC Software Inc., Helical Solutions LLC and Makino Inc. — a software developer, cutting tool maker and machine builder, respectively — share the results of their joint R&D project that began with an email introducing a new high-efficiency six-flute endmill with a chipbreaker. This report is a video supplement to the Get With The Program column in the August 2021 issue of Cutting Tool Engineering magazine.
Cutting Tool Engineering recently organized and hosted a Question & Answer style webinar with industry experts from Walter AG and RobbJack Corp. exploring the difficulties associated with machining aluminum. Terry Iverson, President and CEO of Iverson & Company, a sales, service and precision machine tool rebuilding company, moderated the event. Our panelists included Jim Dale, Component Manager Aerospace, Walter AG, and Mike MacArthur, Vice President of Engineering, RobbJack Corp.
Tungaloy’s TungCut series of grooving and parting tools now offers TungFeed-Blade, an extremely rigid modular blade series for grooving and parting applications.
The new DB133 drills, with their 140° point geometry, are available in diameter range from 1/32-5/64 in. and 0.5 to 2.95 mm. Length to diameter ratios (L/D) of 5, 8 and 12 x Dc are standard.
The new DB133 drills, with their 140° point geometry, are available in diameter range from 1/32-5/64 in. and 0.5 to 2.95 mm. Length to diameter ratios (L/D) of 5, 8 and 12 x Dc are standard.
The Flex drills are available in steps of one hundredth millimeter for drilling depths of 50 x D, as well as the "shorter" lengths of 20 x D and 30 x D.
The Flex drills are available in steps of one hundredth millimeter for drilling depths of 50 x D, as well as the "shorter" lengths of 20 x D and 30 x D.
Video highlights the IMCO Streakers M2 Series, which includes the M223 second generation Streaker end mill for machining aluminum alloys and the M233 roughers that plow through aluminum alloys while using 20% less power.
First Three-Laser-Diode Engraving Laser Head — The newest addition to our family of industrial cutting and engraving laser heads is arguably the most versatile engraving laser on the CNC market. Boasting a real 15 W of optical power as well as a novel design, this is the first compact CNC laser head that not only marks metal, but deep-engraves it.
First Three-Laser-Diode Engraving Laser Head — The newest addition to our family of industrial cutting and engraving laser heads is arguably the most versatile engraving laser on the CNC market. Boasting a real 15 W of optical power as well as a novel design, this is the first compact CNC laser head that not only marks metal, but deep-engraves it.
Join Zoller's tool inspection solutions experts, Werner Lueken & Matt Brothers, for a special edition of the ZOLLER75LIVE event series on May 19/20 as we unveil the latest ZOLLER Innovation in tool inspection — the »genius« — during a live broadcast from our North American Headquarters in Ann Arbor, Michigan.
At The Grinding Doc, we put together this short video with some of our more popular electron-microscope photos. Take a look. It might just change how you see grinding.
A Dormer-branded tool designed for stainless steel is the Force M drill, which has a micrograin carbide substrate and a multilayer TiAlN coating. The drill has an S-shape, modified four-facet, split-point geometry to reduce cutting pressure with honed corners and cutting edges so they do not chip when starting a hole.
Schwanog’s PWP broaching system reportedly can produce internal and external shapes, such as serrations, splines, hexagons and keyways, on CNC lathes with a c-axis. The system includes an insert ground to create the desired shape, a retaining screw and a steel toolholder.
Schwanog’s PWP broaching system reportedly can produce internal and external shapes, such as serrations, splines, hexagons and keyways, on CNC lathes with a c-axis. The system includes an insert ground to create the desired shape, a retaining screw and a steel toolholder.
After a long hiatus due to the COVID-19 pandemic, The Grinding Doc video series on Cutting Tool Engineering's website resumes with a special two-hour episode about Cylindrical Master 2020, an Excel program developed by Dr. Jeffrey Badger, aka The Grinding Doc.
As a pioneer in the industry, Tungaloy has three decades of know-how developing the most efficient solutions for High-Feed Milling. Feed the speed with Tungaloy!
CTE and the RobbJack Corporation in November 2020 presented a webinar titled, "Tips to Improve Performance by 500% When Machining Medical Parts." Presented by Mike MacArthur, RobbJack's vice president of engineering, the webinar examines new cutting technologies and strategies that solve many of the difficulties experienced by shops machining many materials specific to medical machining, including cobalt-chrome, titanium, stainless steel, PEEK and many others.
You are looking for a powerful, flexible, reliable, and rigid tool and cutter grinding machine with an easy-to-use control and a variety of available options, including part loading and tool changing automation.
You are looking for a powerful, flexible, reliable, and rigid tool and cutter grinding machine with an easy-to-use control and a variety of available options, including part loading and tool changing automation.
Nachi America Inc. (Cutting Tools) features the Aqua Revo Oil Hole Drill series in a brief video that offers an overview of the endmill's oil-hole geometry, material and coating. Designed for shops that require high-efficiency machining, the Aqua Revo drill series reportedly will improve productivity and reduce costs.
Tungaloy America Inc. demonstrates the hard turning capabilities of its T-CBN, AH8000 and LX11 insert grades in a two-minute video that runs through a series of turning operations. The video also provides recommendations for which insert grades to use for continuous, light interrupted and heavy interrupted turning applications.
Abrasive Technology Inc. discusses how superabrasive grinding wheels and tools with electroplated bonds are able to maintain tight-tolerance forms, provide freer cutting, and hold form or profile from the first cut to the last. In addition, the tools can be stripped and replated.
Platinum Tooling Technologies recently created a video highlighting the products the company would have exhibited at its booth during IMTS had the 2020 trade show not been canceled due to the pandemic.
Platinum Tooling Technologies recently created a video highlighting the products the company would have exhibited at its booth during IMTS had the 2020 trade show not been canceled due to the pandemic.
View video presentations by ModuleWorks and Open Mind Technologies USA to learn more about hybrid manufacturing. The videos are presented here as a video supplement to the hybrid machining article in the October 2020 issue of Cutting Tool Engineering.
ProvenCut recipe 586 struck a wonderful balance, machining a piece free of chatter and yielding an extraordinary finish using a YG-1 V7 PlusA six-flute endmill held in a Lyndex-Nikken SK16 collet holder. The 2D contour finishing operation was programmed with Autodesk Fusion 360 and run at 210 m/min. (690 sfm) at 0.015 mm feed per tooth (0.0006" feed per tooth) with a 0.203 mm (0.008") radial DOC and 63.5 mm axial DOC.
KYOCERA SGS Precision Tools (KSPT) recently introduced a new suite of 8 Picatinny Rail form tools. The innovative designs are inspired from largely successful high performance end mills in the current SGS portfolio. The SGS Picatinny rail portfolio has been carefully designed for material specific applications to service the firearms industry.
Jeffrey Badger, Ph.D., aka The Grinding Doc, offers a light-hearted quick overview of "The Book of Grinding," which he published for shop employees who want to educate themselves about grinding. Watch the 104th episode of the Grinding Doc video series.
According to Manager Scott Vyhlidal, Tri-V Tool and Manufacturing Co. in Omaha, Nebraska, never turns down work or shies away from a challenging part and will give any reasonable venture a try even as those jobs become increasingly more complex.
With its GCX Linear machine, ANCA CNC Machines brings a complete solution for manufacturing and sharpening skiving cutters as part of a comprehensive gear cutting tool package.
Tungaloy's TungEight-Mill face milling cutter is for extremely light cutting with low power consumption, perfect for low rigidity and low horsepower machines with a BT-30 connection. TungEight-Mill incorporates single-sided positive inserts with eight economical cutting edges for heavy roughing to mirror finishing of various material faces.
The L20XII ATC by Marubeni Citizen-Cincom Inc. provides an environment in which tool setting for machining several types of workpieces can be completed in a single setup.
The A Brand ADO-TRS from OSG USA Inc. is a high-feed, three-flute carbide coolant-through drill. Patented geometry permits stable chip ejection even with less chip pocket space, which is inherent in three-flute drills.
Is it possible to change heavy workholding in one minute? The answer is absolutely with the centroteX S from Hainbuch America Corp. The changeover system features ergonomic handling, resists contamination and provides a short return on investment.
Do you want to grind carbide tools and erode PCD tools with high productivity? The new VHybrid 360 from Vollmer of America Corp. combines the strengths of an innovative grinding machine and a proven, powerful erosion machine.
Dr. Jeffrey Badger provides a simple, if not pretty, solution to a nasty cylindrical grinding problem — when the side of a grinding wheel meets a flat surface. Watch the 103rd episode of the Grinding Doc video series.
UNISIG, Menomonee Falls, Wisconsin, demonstrates why trepanning is beneficial when drilling deep holes that are too large for high-pressure coolant drills or gundrills. Utilized in the aerospace, defense, material production, as well as oil and gas industries, trepanning reportedly offers higher productivity in many applications and uses less power than other drilling strategies.
Presented as a video supplement to Cutting Tool Engineering's July 2020 article that addresses the need for part manufacturers to work with toolmakers to learn about the wide range of tool options available today, "Illuminating Aluminum" offers two machining demonstrations from LMT Onsrud LP, Waukegan, Illinois, and RobbJack Corp., Lincoln, California.
For the 102nd Grinding Doc episode, Dr. Jeffrey Badger covers the impact that thermal softening, residual tensile stresses and rehardening burn have on fatigue life in steel workpieces.
The T93XM can profile with a standard 1A1 wheel and accommodates several grind styles including wheel profile, plunge, peel, in-feed and thru-feed grinding. The perimetric workholding, unique to TRU TECH, ensures part concentricity to eliminate shank runout without indicating. Ultra-precision accuracy is achieved through the 3-axis, fully programmable configuration with CNC variable speed spindle. Pick-N-Place™ software eases and shortens programming setup time. Several design features add stability and further support operator ergonomic considerations. Part sizes can be 3” (75mm) in diameter, up to 8” (200mm) in length.
With the ability to rapidly dial in runout with complete control, users spend less time tapping on the side of the tool and resetting tools and collets. Overall efficiency is increased, machining costs are lowered, and scrap is reduced with easyZERO.
The UltraTEC ultrasonic A25 creates a formation and dissolution/implosion of bubbles in water that release an intense energy during implosion. This is created by an ultra-high oscillation of 20kHz (20,000 oscillations per second) with an oscillation width of +/-80-120microns, which far exceeds the amplitude of ultrasonic cleaning, cutting and welding technologies.
XS Inline, the smallest integrated fiber laser marking head in the world at only 10 x 2.9 x 4.3-inches for its marking head. It’s very easy to integrate this class 4 laser in every production line process. Easy-to-use software and enhanced performance are key to increase 2.9’’ your traceability! Discover Tempo, the dot peen marking machine integrated to your production line. First available with a 30 x 60 marking window, this marking machine is compact, can be installed in three positions, is compatible with Ethernet IP and can mark three characters per second.
Through the online tool, customers can easily submit requests for volume manufacturing projects. The user-friendly interface allows them to upload their files and then enter details such as proposed production scheduling, lead times, quality requirements, design specifications, materials, accreditation needs and preferred processes. This streamlined approach triggers a rapid response from a dedicated project team, which paves the way for further discussions around customer project needs, and enabling customized quotes and solutions that perfectly align with their requirements.
With the 4-watt UV and green 10-watt marking lasers, the new V-Series offers higher performance and better precision than its predecessor models, but in a much more compact design. This allows for easy integration into existing production lines and more versatility in the design of production environments.
The MMC collet chuck is precision ground and pre-balanced to 30,000 RPM at G2.5 with runout accuracy of 3 microns at 4 times the diameter – ensuring accuracy and reliability during high-speed operations.
These bumpers are available in “off-the-shelf” sizes, as well as special cut to custom requirements. Bumpers are most often used in material handling, assembly and manufacturing operations to guide, stop and support parts as they are moved and transferred. Fairlane Products maintains a large inventory of products and they are an economical alternative in many applications to eliminate the need for custom engineered molded components.
Flexibility is a key feature of the tap grinding process on the TapX. The specially designed machine and powerful ToolRoom software ensure a vast range of tap types and sizes can be designed and manufactured in one set-up. Combine this with the benefits of quick changeover time and it's not hard to see how TapX can increase productivity and reduce lead times.
The FX7 ULTRA not only grinds tools faster than other machines, but also produces tools with both finer surface finishes and greater accuracy — which means superior tool performance and quality.
The AA3100 series is designed as a drop-in replacement for hydraulic or pneumatic actuators. These legacy approaches waste excess energy and floorspace required for compressors, while adding costly and complex mechanical components. In the case of pneumatics, they can leak and create messes on the plant floor. To simplify replacement of these devices, the AA3100 devices leverage an ISO 15552 flange size and bolting points on both sides as well as an external thread mount on the shaft end of the spindle to mount ball heads, clamping hooks or other common adapters.
The use of 8620 ensures that the components will work harden over time, rather than becoming brittle as is the case with the use 9310 alloy steel. Single point threading ensures that the threads are balanced (lead-in/lead-out at 180 degrees) which is very difficult to achieve when rolling threads. Full depth is also attained for each thread. Because all machining is done with a single set-up, concentricity is achieved.
Two coolant through tools with top and bottom outlets for output pressure of up to 340 bars.
Significantly improves insert tool life. Quick, change fast and easy adapter indexing. User-friendly with a single clamping screw. No set-up time after blade or pocket indexing. Can be used next to the spindle or next to a shoulder as the square adapter and tool shank align with no protrusions. Economical adapters with 4 pockets for TANG-GRIP 2,3- and 4-mm width inserts.
Suitable for all TANG-GRIP inserts including high feed inserts. Designed for higher productivity.
The tables can be bolted together to meet varying length requirements. The legs are equipped with leveling pads that can be adjusted independently from 25 inches to 37 inches. The tables’ precision machined steel rollers have durable roller ball bearings to make movement fast and easy.
The core components of the machine stayed the same. The spindle columns were repositioned to replace the gantry mechanism. This one change allowed for several previous components to be removed, making the machine more open and maintenance-friendly. The main change is that we have incorporated a Fanuc robot within the machine for the movement of parts.
The PR115S/PR120S series features Kyocera’s new MEGACOAT TOUGH HRSA proprietary coating technology, offering exceptional endurance and maximum tool life for machining heat-resistant super alloys (HRSA). The inserts consist of four distinct layers.
A key advantage of the CA115P/CA125P series is its expansive lineup of chipbreaker options covering everything from finishing to roughing, ensuring optimal performance and productivity across numerous applications. Kyocera is also introducing the new PMG chipbreaker design for optimal medium to roughing efficiency with lower resistance and protection against chip entanglement when machining steel.
hydrostatically guided slides are wear-free and thus have an unlimited service life. The hydrostatically guided linear slide units are characterised by high reliability, long-term availability and low service costs. Since these properties exist independently of the service life, the machine end-customer can produce more effectively and economically in the long term.
Rollon´s TLS Series actuators´ unique combination of high stroke to closed length ratio, synchronized drive system, simple mounting, and minimal maintenance requirement empowers designers to easily optimize their machine footprint or floor layouts for a wide range of industrial equipment including CNC, part transfer, and assembly machinery.
Utilizing ANCA’s machine platforms with a robot cell, blanket grinding offers flexibility across a range of tool sizes and applications. Blanket grinding allows for full automation of tools of similar geometries, by consolidating all tool grinding processes into one single machine. A batch of complete finished tools can be produced without interruption directly from lengths of ground bar stock with no operator intervention.
With the synchro-use dual actuators, the two carriages move toward each other when the handle shaft is turned clockwise. The two carriages move away from each other when the handle shaft is turned counterclockwise. As with the standard linear actuators, they can be used with simple manual adjustments without complex processes of parts selection, design and assembly. The internal parts, as well, are protected from dust by an aluminum profile body and dustproof sheet.
The MOTIACT mechatronic gripper series is the ideal solution for performing precise, consistent, and accurately monitored gripping operations for moving parts, pallets, and chucks in and out of CNC machines and automated work cells. These first-in-class grippers are equipped with an incremental measuring system to guarantee adjusting gripping pressure, linear positioning, and speed control as standard features. All models feature a Profinet or I/O link interface to ensure seamless integration into existing systems.
The combination finishing machine is really two machines in one because it can handle a multitude of jobs that include contour part finishing, flat stock finishing, polishing, grinding and deburring—virtually any finishing operation. The belt arm adjusts vertically, horizontally and any position in-between.
The link between the physical gearbox and the digital world is established via a data matrix code (DMC), a 2D code on the gearbox nameplate. This can be scanned via smartphone or tablet, for example. Alternatively, access is possible via a web portal on the Neugart homepage (www.neugart.com).
The ultrashort pulse laser marks in the deepest, matt and non-reflective black without generating significant heat input on the workpiece. Even through further processing steps, such as passivation, the marking remains reliably legible and corrosion resistant. Due to the very short pulses down to the femtosecond range, in combination with high pulse energies, the system marks various stainless steels, titanium and a variety of plastics.
WDS’ clevis fork brackets enable ISO 6432 actuators to connect and drive a host of machinery or devices. Available in 6 mm and 8 mm bracket pin sizes, three connection styles are available. The detent pull pin features a spring-loaded ball that secures the fastener, providing a high level of security, while the quick release pin enables easy fastening and removal.
Easy setup is assured with the electronic type plate on the 1FL2 motor and one-button tunning in the S200 drive. The integrated brake resistor and integrated holding brake control add to the functions in the S200 servo-drive. High durability is designed in with the coated circuit boards (3C2) in the S200 and IP65 motors with metal connection solution. Built-in under-voltage protection is further provided.
SINAMICS S210 offers DC link coupling on 3-phase units for increased power efficiency on multi-axis applications. Corresponding SIMOTICS highly efficient synchronous motors feature high-resolution 22- or 26-bit absolute encoders, single or multi-turn. One-cable connectivity is standard and all motors and feature IP64, IP65, IP67 or IP69X protection. Easier setup and selection are assured with the integrated EMC filter and braking resistor.
Diatool does not limit the times a reamer can be reconditioned, providing an even longer service life of the reamer with no compromise in tool life or cutting quality. Offering standard deliveries of 4-6 weeks and cost savings of 40 percent over new, Diatool’s Reamer Reconditioning Service is ideal for machining operations struggling with long lead-times or non-responsive tooling vendors.
SINAMICS G220 is the first drive to join the Siemens Xcelerator portfolio, the Siemens-wide business platform for digital transformation. SINAMICS G220 drives are an integral part of the TIA Portal and feature a digital twin in Startdrive, the drives commissioning tool from Siemens. This allows the behavior of the drive to be tested and optimized before the hardware is available. SINAMICS G220 has an integrated web-server for commissioning which eliminates the need to install software or an app on a PC or mobile device. This saves time and makes drive setup very intuitive and extremely user-friendly.
QL2 features heavy duty, all steel body – treated with Jergens Mcoat for superior wear resistance and durability even in harsh environments. The system features a floating and opposing clamping wedge assembly (with sealed wedge bodies); an Acme threaded screw for increased strength and long life; O-ring lifters for positive separation of top tooling; and versatile standard mounting options. QL2 is Made in the U.S.A. and has a Jergens patented design.
Metal parts packaged in Eco-Corr Film® receive ongoing protection against salt, excessive humidity, condensation, moisture, and aggressive industrial atmospheres. In addition to serving as a physical barrier to the elements and inhibiting corrosion on metals in direct contact with the film, Eco-Corr Film® also contains Vapor phase Corrosion Inhibitors that vaporize and then condense on all accessible metal surfaces within the enclosed package to interrupt the corrosion reaction between metal, oxygen, and an electrolyte.
Dia-Strip and Dia-Sheet lapping and polishing film incorporates pure virgin diamond powders in their highest concentrated forms. This slows for maximum material strength, durability, and performance. The powders are first expertly graded for uniformity, and then held into place by a thin nickel. With this approach, 90% of the grains are left exposed for cutting, yet are unable to escape the film due to the strength of the bonding agent. This unique construction makes Dia-Sheets and Dia-Strips highly durable, yet also flexible, bendable, and formable.
STUDER has brought two new cylindrical grinding machines to the North American market with the release of the S100 and S36. BLOHM continues its tradition of customer-centric surface and profile grinding innovation with the release of the PLANOMAT XT Essential. WALTER is focused on packing more tool grinding functionality into a compact space with the new HELITRONIC G200 and HELITRONIC MINI PLUS.
With the ANCA RFID (Radio Frequency Identification) regrinding solution, tools of various types and diameters and from different orders can be dynamically loaded, rather than having to sort them by diameter or customer as was previously necessary in mixed batches.
The Reliable Uberlight comes in black or white and 3 styles: with a convenient clamp mount to easily mount on any machinery or worktable, with a 7.75” base to prevent tipping, or a direct table mount, (black only, shown below. With its 26.5” silicone gooseneck and 270 degree rotational head the Reliable Uberlight allows light precisely where needed with a great hold. The 4.75” LED panel does not create glare or flickering and provides up to 60,000 hours of use and 240% more luminous efficiency. All provided with a 6’ USB cord and adapter.
The bumpers, commonly identified as RB-516 come in a variety of mounting options such as tapped hex shoulder and threaded, stud mount, and steel plate mounted. They come in black neoprene, white nitrile, or colored urethane. Diameters sizes run from ¾ in. to 2 ¼ in. with metric sizes available from 19-57 mm.
Data from all gauges in the Q-Span System – including thread gauges, robotic calipers, LVDT probes, drop gauges, bore gauges, laser micrometers, vision system, 2D telecentric profilers, and more – is combined into one convenient output for statistical process control (SPC). Data from any or all gauges can be used in real time for in-process decision making and process monitoring.
During the rebuild process, AP&T technicians disassemble and thoroughly examine the press. They replace worn parts and outdated systems and components before reassembling the press and performing a test run and safety check. All exchanged parts are covered by AP&T's new-part warranty.
The cell has a 6-Axis FANUC M-10iD/12 Robot with 4.7' (1,441 mm) reach, capable of handling a maximum load of 26.5 lbs (12 kg). The GRC-R12 features a pneumatic single-or double-gripper system. The drawer feed system can have up to six drawers that can be unloaded and reloaded while the robot cell and machining center are in operation. With GROB’s unique machine design, excellent chip control inside the machining center allows for long periods of unmanned operation without faults. Offering high customizability, customers may select from capabilities such as a blowoff box, SPC drawer and an alignment station.
The Truing Parameters Calculator is the result of a 3-year collaboration between Rush Machinery, the International Grinding Institute, and Dr. Jeffrey Badger, the ‘Grinding Doc’. Rush Machinery commissioned the project that was later presented at the 2008 CIRP General Assembly in Tokyo by Dražumerič, Badger, Klement, and Krajnik titled “Truing of Diamond Wheels–Geometry, Kinematics and Removal Mechanisms,” published in the CIRP Annals, volume 57, pages 345-348.
DESTACO has designed its cobot tooling solutions for simplicity and ease of use with off-the-shelf availability via kits that feature all of the end-user selected accessories, along with the hardware and tools needed for installation, reducing the need to consult an application engineer. All of the tooling solutions are compatible with cobots that have an ISO 9409-1-50-4-M6 end-of-arm mounting pattern. Blank robot and tool plates are offered for those who wish to use their own mounting patterns.
KBC Tools & Machinery is stocking Aircat pneumatic straight die grinders, extended die grinders, angle die grinders, impact wrenches, ratchets, reversible drills, saws, and impact wrenches in ½” and 3/8” capacity, 3” reversible cut off tools, and hammers – all with feather triggers and high RPM in Canada and the US.
WDS Components’ castor range extension includes a new stud fitting design with an M12 size threaded shaft that extends installation flexibility. The stud fitting design joins the existing bolt hole style, as well as a variety of castors with a plate fitting attachment. The castor design also includes a swivel wheel action, making them easy to operate across various surface types, as well as a foot-operated brake mechanism.
The dual gripper system on the versaLoad allows manufacturers to reduce part loading times by as much as 50% when compared to a single gripper setup. This allows the automation cell to operate with maximum efficiency, enabling versaLoad users to boost productivity without having to increase headcount.
There are two stocked and standard product offerings where gundrills are delivered within 24 hours of the order. The SFGD Express program is for Single Flute Gundrills in diameters from 0.1250” - 0.7500” (3.175mm - 19.050mm) and lengths up to 48” (1219mm). The SCGD Express program is for Single Flute Solid Carbide Gundrills with standard ½” steel shanks in diameters from 0.0355”- 0.1969” (0.902mm - 5.000mm) in lengths from 4”- 12” (102mm - 305mm), depending on the tool diameter.
Among the additions are new models of the company’s Carbide Micro Grinding Mandrels for optimized precision micro machining accuracy and performance. Carbide Micro Grinding Mandrels are compatible for use with Tungsten Carbide, fiberglass, stone, marble, ferrite, composites, non-ferrous metals, industrial ceramics, rubber, reinforced plastics, glass, and other hard abrasive materials. Offered in both Diamond and Borazon Jig types, the grinding mandrels are further available with a choice of either 500/600 or 325/400 grit, as well as either a 0.016”, 0.020”, or 0.02” head size.
VpCI-126 PCR offers excellent performance, protecting metal parts from all types of corrosion, including rust, stains, tarnish, white rust, and oxidation for up to 5 years.* Metal parts packaged in Cortec VpCI-126 PCR receive continuous protection from salt, excessive moisture, condensation, aggressive industrial atmospheres, and dissimilar metal corrosion.
Electrak XD linear actuators are available immediately as a compact, fully integrated unit, including the motor, drive, IP-rated housing, control architecture, diagnostic features and more. The end result is a "plug and play" actuator that saves the designer money and time.
The compact stainless steel adjustable bracket can be installed into a customer’s process. Operations requiring both hands to package, test or assemble parts now remain static free. The nozzle is equipped with an LED indicator to assure proper functionality while employing EXAIR-engineered air nozzles to maximize efficiency and meet OSHA requirements for sound level and dead-end pressure. Made from durable static dissipative polycarbonate and featuring a non-marring nozzle, the Intellistat assures its usefulness in applications such as PCB or electronics manufacturing.
Waterjet cutting works as simply as it is effective: the cutting head directs a fine jet of water at high pressure of up to 6,000 bar, a jet diameter of 0.38 to 1.02 millimeters. In this stress-free cutting process, the material particles close to the surface are cut off without any heat being introduced into the material. This process is an optimal solution for temperature-sensitive and thick materials with complex geometries.
The RFID transponders are available as freely writeable and preconfigured versions. A transparent window on the PITreader card enables users to still read the LED status indicator when the card is held up to it. If the company already uses RFID-capable cards, these can also be used in conjunction with PITreader card unit. In this case, users need only one card for multiple functions.
The horizontal arrangement of the tool pockets greatly improves machinist safety. Traditional tool racks and carts keep tools in a vertical position with the cutter tip pointing up. This creates a risk of injury for operators when they need to reach over sharp edges to access other tools in the middle or back of the cart. The Tool Caddy design makes it easy and convenient for the operator to grab each toolholder without any risk of cuts, and it uses only about 4 square feet of floor space.
Thomson compact linear systems are appropriate for applications requiring high-accuracy linear axes in confined spaces, such as 3D printers, microscope stage managers, medical pipetting systems and semiconductor manufacturing. They are available with NEMA motor sizes between 14 and 23; stroke lengths of up to 40 in (1000 mm); and load capacities up to 2091 lbs (9300 N).
The horizontal arrangement of the tool pockets greatly improves machinist safety. Traditional tool racks and carts keep tools in a vertical position with the cutter tip pointing up. This creates a risk of injury for operators when they need to reach over sharp edges to access other tools in the middle or back of the cart. The Tool Caddy design makes it easy and convenient for the operator to grab each toolholder without any risk of cuts, and it uses only about 4 square feet of floor space.
With CenterMaster, the user simply clamps a radio dial gauge into the workspace and sets it to the quill. The gauge and machine wirelessly communicate, automatically adjusting the holder along the X axis. The system then guides the operator through adjusting the Y axis via the machine’s touchscreen display.
Quick release clamp fasteners help increase productivity by reducing set up times, eliminating errors in assembly and installation and simplifying procedures. They are ideal for frequent set ups, regularly or to reconfigure production equipment. Most specifically, these fasteners may be used in automation to attach conveyors, star wheels, guide plates, shooters, pushers, handling machine chucks, rotary blades and maintenance covers on machines, to name just a few applications. The clamps offer locating repeatability to +/- 0.1 mm.
There are two types of levers available for the E-Xtreme series enclosures. The standard C-type lever is made of a stainless-steel frame and polyamide handle, and it provides an IP65/IP66 protection degree. The E-Xtreme enclosures with the C-type lever are ideal for environments with salt mist, ultraviolet rays, corrosive chemicals, and frequent mating. The V-type lever is ideal for environments with higher humidity levels, lower temperatures with ice, and salt mist because it provides better waterproofing with IP66/IP67 protection rating thanks to its vertical closing movement. Also, the V-type lever is also more resistant to shocks, fire, and chemicals because the lever is made of full stainless steel without using any plastic components.
Today’s MAX System introduces the latest innovation known as Focused Deburring. These multi-axis machines feature up to four 1- to 5-axis heads or towers, which can process simultaneously or in sequence within a single working environment. This ability allows the machines to perform multiple operations on many edges and surfaces of a part at the same time. For example, a single MAX System can remove a protruding burr from an 8” spur gear, create a precision .060” chamfer on both sides of the same gear, and wash the part within 30 seconds.
The PS2000 variants combine high-performance power supply units from Beckhoff with the ultra-fast EtherCAT communication standard. This allows the control system to directly process extensive measurement data and internal device diagnostics information and establish remote access to power supplies. It also provides advanced monitoring features for the DC output (for system monitoring) or the AC input (for source monitoring).
The unit uses multiple spray nozzles on its circumference, providing a steady and pressurized stream. Each nozzle can be plugged or opened to create customized spray patterns. Added spindle rotation ensures that coolant reaches virtually everywhere inside the machine. Residing in the tool changer, and programmed just as any other, the Jergens Washdown Tool is deployed periodically at scheduled intervals. This automation shortens cleaning time and supports long machining cycles, even lights out manufacturing periods when no operator is present.
Both die grinders feature RAPIDSTOP™ Brake for enhanced user safety, stopping most accessories in less than two seconds. Combining three exclusive innovations - the POWERSTATE™ brushless motor, REDLITHIUM™ battery pack, and REDLINK PLUS™ intelligence- these new die grinders provide users with the versatility and performance needed to remove material faster than a corded die grinder.
Using Vapor phase Corrosion Inhibitor (VpCI®) technology, the bubbles protect a variety of metals, including carbon steel, aluminum, copper, brass, silver and stainless steels, without leaving film or residue on packaged items. CorShield® Bubble Bags are non-toxic and recyclable. Components that need protection are placed in the bags and in matter of hours, the vapor from the VpCI® bubbles saturates the enclosed airspace.
The miniature lead screw line is available with either standard or anti-backlash lead nuts to optimize positional accuracy, friction and repeatability. The anti-backlash lead nut design reduces friction between the nut and screw threads in order to optimize efficiency while still eliminating play between the lead screw and nut.
The swivel feet with a steel double bolt down base includes two screw holes enabling secure surface attachment. The threaded female design accepts inserts from M6 up to M16 while the foot diameter varies from 40mm to 100mm. The swivel joint allows 50° forward and backwards tilt across a 360° horizontal plane, providing flexible installation whatever the floor angle. This design is manufactured in durable steel with a nickel plating to resist corrosion and provide a bright finish.
Easily retrofitted, the PSS-T300 provides excellent access to the work area while offering space-savings via its tower design. The new pallet storage system offers flexible setup options and can be paired with one or two machines, and configured with one or two setup stations. The PSS-T300 can handle a variety of pallet sizes including Erowa ITS148/ PC210 and GROB standard 320 x 320 mm/ 400 x 400 mm, and has storage capacity of up to 81 round pallets and up to 38 square pallets. For ease of operation, integrated software enables intuitive cell control.
XPlanar now provides greater traceability through ID technology integrated into the mover bumper. The ID functionality enables unique identification of XPlanar movers by reading the mover’s individual serial number. The ID bumper is easy to mount or retrofit on movers already in the field, and it requires no additional hardware. This solution makes it possible to seamlessly track movers and the products they carry – even after system shutdown and restart. The bumper ID also eliminates the need for homing at system startup with appropriate programming.
KettleTag PLUS EZ is a proven solution that requires NO extra steps. Fabricators and galvanizers can print this tag, attach it to their steel, and read the barcode on the tag after the steel has been galvanized. The days of using laminators and cutting tags apart are over, which makes the identification process more efficient for our customers.
Featuring a powerful, 30-watt fiber laser and a large, 100 x 100 mm marking window, MobiLase® Battery delivers fast and durable laser markings on nearly any material ranging from plastics to steel to precious metals, among many others. The 7-lb. handheld applicator is equipped with a trigger to start marking plus two bracket options for ease of marking various part shapes.
The soft closing design is especially suitable for applications with frequent opening and closing, thanks to the self-extinguishing UL-approved thermoplastic locking lever component that significantly reduces friction and wear when it slides on the pegs. The stainless-steel core then intervenes to ensure higher resistance against various mechanical stresses and vibrations from harsh industrial environments.
Powertite, with its perfect geometric fit, increases load-bearing capacity in the tapped nut thread by over 20 percent compared to screws with trilobular load-bearing cross-section. That creates a series of technical and commercial benefits: standards-compliant tapping torques, plastically stressed assembly even into conical cast core holes in Al-Gd, a preload force similar to metric fastenings, and the possibility of larger core hole tolerances to optimise lightweight metals casting.
The S100 can be configured to meet each customer’s individual needs. It can be equipped with up to two internal grinding spindles, or one internal and one external spindle. In addition to a fixed wheelhead, it can be supplied with a manual wheelhead and a 2.5 degree Hirth coupling. The optimal combination consists of an automatic wheelhead with a 1 degree Hirth. A synchronous motor drives the grease-lubricated internal and external belt spindles. The machine is operated by the FANUC 0i-TF PLUS controller, together with the proven STUDER operating system.
MH140 fits most machine coolant tanks, and the small footprint – no larger than a standard conveyor – saves valuable floor space. A unique frame design using high-strength materials enables the conveyor to withstand extreme loads, torsional forces and abrasion for trouble-free operation and long life.
The consolidated range of enclosure parts includes a wide variety of locks, latches, and catches to suit all requirements. Quarter turn locks are frequently specified for enclosures thanks to their ease of operation while ensuring secure door closure. The device comprises a cylindrical body with a cam lever arm that secures in just a quarter of a turn. Simple operation makes them ideal for fast access to machine panels or general purpose lockers.
The basis for the extraordinary flexibility of the HELITRONIC MINI PLUS is the unique WALTER gantry design. The economical production of common and complex geometries of tools with a diameter range of 1mm - 16mm (0.04" - 0.63") in one clamping is guaranteed by the powerful HSK belt spindle with two spindle ends for up to six grinding wheels. In addition, the revolutionary C.O.R.E. hardware and software architecture with intuitive operation facilitates machine set-up, operation, networking and maintenance.
The 2700 Medium Duty hits the sweet spot between Dorner’s popular low profile 2200 and 3200 heavy duty platforms. While the 2200 conveyor can carry up to 80 pounds, and the 3200 conveyor can support up to 400 pounds, the 2700 Medium Duty is engineered to safely convey up to 150 pounds. This expanding portfolio of industrial conveyors give customers a full breadth of options to select the right platform for their specific application.
Mencom offers a compact enclosure series engineered for ease of assembly and simplicity in mind. These fully metallic enclosures are available in size 32.13 exclusively and their hoods are designed in one piece for any wiring combination with a robust stainless-steel lever. They can be served as EMC (Electro Magnetic Compatibility) enclosures and are corrosion resistant thanks to the conductive layer of galvanic zinc plating on the surface.
The outer race of the ball bearing is embedded in the POM plastic of the guide roller during the molding process. Each roller is machined to precise dimensions for an exact runout, which makes cylindrical and convex shaping of the running surface possible. Convex rolling surfaces compensate for alignment errors by preventing them from running on corners or edges.
The belt grinder features two belt heads ensuring the ultimate flexibility to handle platen grinding, contact wheel grinding and even slack back grinding. Its design enables roughing to intermediate grinding to blending as well as final finishing and polishing.
CorShield VpCI-220E Films and Bags combine the latest film technology with the most effective corrosion protection for metal products. Vapor phase Corrosion Inhibitors protect multi-metals (aluminum, carbon steel, galvanized steel, and copper) from all types of corrosion including rust, tarnish, stains, and white rust.
These S Series caps are available with a plain top, and many of the sizes are also available with a knurled top-collar, which makes them easy-to-grip and remove. In addition, the caps are also available in both LDPE plastic and flexible TPE.
The unit control of the Connect.series range, with its compact size, has a large 10’’ touch screen in tempered glass and pairs in just a few seconds to the marking head thanks to the RFID technology. It can connect to the network and exchange data with the information system (ERP, MES). Its intuitive software developped by Technomark make marking possible within 3 clicks.
Users can machine this collet attachment to adapt it to match the internal contour of the workpiece they are clamping. However, what makes this new exhibit from AMF so special is that no through holes are needed in the workpiece to achieve safe internal clamping. With mechanical lateral actuation, workpieces with a blind hole can also be clamped securely and without distortion.
Piezoelectric materials convert electrical energy into mechanical energy and vice versa; the so-called inverse piezo effect is harnessed for the generation of oscillation and precision motion. For ultrasonic applications that require high bandwidth, hemispheres and hollow spheres are currently available with an outside diameter range from 2 – 100mm with wall thickness as small as 0.2mm. Uses for electro-ceramic spherical transducers include medical high-intensity focused ultrasound (HIFU), therapeutic ultrasound, hydrophones, and sonar transducers.
One of the primary benefits of vibratory feeders in the nut processing industry is the simple and clean construction of the feeder tray. The trays can be easily and quickly wiped down or washed out for product changeover or sanitation protocol.
Made from 316 stainless steel, the hinges can be used in environments subject to regular washdown with aggressive detergents. The design provides long-term resistance to corrosion, and rounded edges prevent accumulation of bacteria, enabling an easier and more effective wash-down.
The company’s Tiger system has firmly established itself as the gold standard for cutting tool insert finishing, with installations in many of the world’s leading cutting tool insert manufacturers. The system can be configured to process inserts for all essential pre-coating, edge honing or post-coating operations.
The PermaClean Filtration System eliminates sludge build up by adding optional agitation to the coolant collection tank. FlexForce is a high-pressure coolant system that dramatically outperforms ordinary flood systems. Will-fill combines automatic volume measurement and metalworking fluid analysis with faultless filling, permanent conditioning and timely reporting to provide worry-free coolant care.
The new medium duty range of ball transfer units is manufactured by a machine cutting process that retains strength and rigidity, enabling the units to transport higher weight loads. Versions include a carbon steel and zinc plated body with a Steel 9Cr18Mo ball, and the units can also operate in climates from -20°C to +60°C. A model with a 304 stainless steel body and ball also adds protection in moisture-prone environments or when facing exposure to more aggressive chemicals.
FL Series markers can be mounted in open Class 4 workstations or Class 1 safety enclosures, with a programmable Z-axis, optional rotary D-axis, and integrated barcode reading and verifying technology. They are designed for easy integration into robotic cells, production lines, and other highly engineered solutions to support modern manufacturing environments.
In situations where the Line Vac requires a specific flange mounting option, EXAIR can accommodate. Locations requiring custom mounting holes, brackets or inlet positions are possible. For applications where stock aluminum, or 303 and 316 stainless steel won’t work, alternate materials like PVDF, OVC or PTFE can be utilized. Even in extreme environments, EXAIR can produce both heavy duty or high temperature iterations to handle even the toughest material or conditions.
The N-30m2 SSD series is based on industrial-grade 3D TLC NAND and can withstand temperatures ranging from -40 to +85 °C. The PCIe 4-lane interface follows the PCIe 3.1 specification and provides sequential read and write bandwidths of up to 3,500 MB/s and 3,100 MB/s, respectively. For read and writes, random access achieves more than 475,000 and 525,000 IOPS, respectively.
VGrind 260, VGrind Neon and VGrind Argon – these are the names of the three new tool grinding machines from the sharpening specialist VOLLMER. They were presented for the first time at the GrindingHub 2022 trade fair in Stuttgart.
A start-up company near Chicago designs and fabricates custom tool foam inlays for toolboxes, workstations, travel cases and reusable packaging. Kaiser Manufacturing says its process fills the need for a custom solution that is superior to hand-cut tool foam in both function and appearance.
The S36 has a fixed grinding head, with grinding wheel angles of 0, 15 or 30 degrees available. The distance between centers is 650mm and the maximum workpiece weight is 150kg. Proven components have been used in the machine. These include a Granitan® machine bed and a workhead with high-precision roller bearings.
Featured on new GF Machining Solutions’ CUT P Pro Series wire EDMs, the iWire function works in tandem with the company’s Intelligent Spark Protection System (ISPS), both of which are part of the company’s Uniqua control.
The volume reduction of aluminum, magnesium, copper, brass, steel and other types of metal chips represents a significant cost savings in labor, disposal, transport and storage. Jorgensen/SFH single and double-shaft shredders efficiently reduce chip size in preparation for centrifuging or briquetting. The volume reduction resulting from implementing a shredder also lessens the frequency of bin removal from a machine, giving a shop’s employees additional time to focus on other more productive work. Jorgensen/SFH offer a variety of shredder size options constructed per a customer’s material and desired chip output needs.
These guide rails are assembled from precisely matched components: linear guide rails GN 2492, the matching cam roller carriages GN 2494 and the separately available wipers of TPU plus the individual rollers with three different bore types. The exceptionally stable guide rails are produced in a rolling process and can be mounted using the typical bore pattern, even up to a rail length of 97.64 in (2480 mm).