The L.S. Starrett Co. | Cutting Tool Engineering

Products

W640JZ, W643JZ, and W644JZ Wireless Electronic Depth Gages

The W643JZ depth gage features a knife edge base and a needle point contact that has been hardened and ground. The conical point which is 1/2" long with a 40-degree angle can be precisely positioned for close work due to a cutout on the knife base. All three of the new Starrett wireless electronic depth gages are accurate to +/- .001"/ 0…

TENNAX™-PRO Bi-Metal Band Saw Blades

TENNAX-PRO blades are ideal for cutting a wide range of materials including carbon steel, carbon steel alloys, stainless steel, and non-ferrous materials. In addition to pipes, tubes, structural and bundled materials, TENNAX™-PRO applications include small solids. The blades are available in widths of 3/4", 1", 1 1/4", 1 1/2",…

2900 and W2900 Indicators

Starrett 2900 Series Indicators are equipped with RS232 output and compatible with 2900 SCM, SCU and SCKB cables, while Starrett W2900 Series Indicators, which have all the same features and capabilities of the 2900 series, are fully wireless and equipped to send data for SPC analysis at the push of a button with no cables required. Both the 2900…

Chordal Height Gage for Aerospace Applications

The L.S. Starrett Co., a global manufacturer of precision measuring tools and gages, metrology systems and more, has introduced a custom designed and manufactured Chordal Height Gage (a.k.a. DO Gage) to be used for measuring the opening heights of turbine vanes at specific locations to verify that an aircraft engine will get proper air flow.

Intenss Bi-Metal Band Saw Blades

Featuring a patented process developed by Starrett called bi-metal unique technology, that provides 170% more weld contact with the teeth, Intenss blades exhibit superior resistance to tooth strippage, significantly reducing fracture and breakage, which enables exceptionally long blade life. Performance is further enhanced by M-42 teeth with a…

AVR300 Multi-Sensor Vision System

The AVR-FOV 0.14X automated part programs deliver accurate results to the micron level in a matter of seconds with “Go/ No-Go” tolerance zones, and data are provided in one easy-to-interpret report. These features allow metrology users in manufacturing facilities or QC labs to produce accurate, fast, and repeatable results.

DataSure 4.0

The Starrett DataSure 4.0 System operates on the latest wireless networking technology that uses short-wave radio frequencies to interconnect cell phones, computers and wireless electronic devices, enabling much faster speed, greater bandwidth and longer range for higher data throughput. The range of DataSure 4.0 is ten to twenty times that of any…

Decorated Micrometers

Made in Athol, MA U.S.A., the themed T436.1 Micrometers are accurate, rugged, and feature renowned Starrett quality workmanship. The micrometers feature .0001" graduation, ratchet stop, lock nut, and carbide measuring faces on the anvil and spindle. No-glare satin chrome finish on the thimble and sleeve with staggered lines and distinct…

AVX550 Multi-Sensor Vision System

The new Starrett AVX550 Multi-Sensor System features dual optical systems that work in tandem to measure a broad range of features. The primary zoom lens enables small intricate features to be inspected with high precision and resolution of up to 2 microns. A secondary large field-of-view camera is equipped with a telecentric lens that can…

Electronic Digital Micrometers

To withstand the harshest shop elements including coolant, water, chips, dust and dirt while retaining tool integrity, the new micrometers include an IP67 level of protection on sizes 0 - 4" (0 - 100mm) and on various application-specific models. A modern, ergonomic, insulated frame design on the new No. 733.1 0-1" outside micrometer is…

MetLogix Mx200 Digital Readouts (DRO)

he Mx200 is a shop-hardened DRO. A sealed rubber keypad and durable powder-coated enclosure provide lasting performance in any environment from the shop floor to the Quality Control Lab. Capable of Optical Edge Detection and Crosshair Measurement, Mx200 probing options are spontaneous. The exclusive EdgeLogic™ feature enables gesture-driven…

Rotary Table Springs Force Tester

The L.S. Starrett Co. has introduced a newly designed rotary table springs force tester. The system is setup to test multiple springs in a single setup without the need for additional operator input as required when springs are tested one by one. The batch testing volume production approach saves time and significantly increases test throughput,…

HB400 Benchtop Optical Comparator

The L.S. Starrett Co. has expanded the horizontal X-axis travel on its HB400 benchtop optical comparator from 12" to 16" (300mm to 400mm), providing users the versatility to measure larger parts on its workstage. Available with optical edge detection, the HB400 model is a workhorse of the broad line of Starrett comparators, providing…

Flexible Force Testing Systems Design

The L.S. Starrett Co. has introduced a flexible selection architecture that enables the range of Starrett force and material testing software programs to be compatible with its different test frame series. This interchangeable system architecture increases application versatility, providing users a wider range of solution options from basic to…

Digital Rockwell/Superficial Rockwell Benchtop Hardness Testers

The L.S. Starrett Co. has introduced two new digital Rockwell/superficial Rockwell benchtop hardness testers (Nos. 3823 and 3824) with fully automated load/unload procedures and capable of providing highly accurate readings. The new Starrett models utilize a closed-loop control unit with a load cell, a DC motor and an electronic measurement and…

Benchtop Hardness Testers

The L.S. Starrett Co. has significantly expanded its line of benchtop hardness testers, adding seven Rockwell systems, eight Vickers systems and one Brinell system, a total of 16 new testers.

HDV300 and HDV400 Benchtop Digital Video Comparators

The L.S. Starrett Co. has introduced a new generation of its HDV300 and HDV400 benchtop digital video comparators with impressive speed increases and improved illumination, design and convenience enhancements. CNC motion on the new HDV systems is significantly faster, enabling even greater user measurement throughput. At 10mm/ sec., speed on the Y…

S1 Spring Testing Systems

The L.S. Starrett Co. has announced the introduction of a basic, affordable Spring testing solution designed for compression and extension springs. The new Starrett S1 Spring testing systems were developed for high-volume production testing for users seeking more consistent results over manual testing methods.

AV450 Automatic Vision System

The L.S. Starrett Company has introduced its AV450 Automatic Vision System. Versatile, accurate, fast,and American made, the new 3-axis vision system allows users to cost-effectively achieve high throughput in their inspection process, and is suitable for both repetitive, larger part-run applications and routine quality assurance.

Digi-Check No. 258 Series Height Masters

The L.S. Starrett Co. has announced the introduction of its Digi-Check Height Masters with electronic digital readout. The new Digi-Check No. 258 Series Height Masters combine the accuracy of Starrett-Webber Gage Blocks with a precision micrometer head and digital readout display.

DFC and DFG Series of Digital Handheld Force Gages

The L.S. Starrett Co. has introduced its DFC and DFG series of digital handheld force gages. Depending on the series, advanced automatic testing can be attained with the DFC force gage controlling a Starrett FMM digital force tester, or basic testing can be performed using the DFG gage.

2700 Digital Electronic Indicators

The L.S. Starrett Co. has introduced a range of digital electronic Indicators conforming to true AGD (American Gage Design) Group 1 dimensions, providing the ability to replace traditional mechanical indicating applications in the smallest AGD size specification class. Starrett 2700 electronic indicators are the first digital gages to match true…

Motorized Digital Test Frames

The L.S. Starrett Co. has introduced a series of Motorized Digital Test Frames for performing a range of basic, high volume in-situ lean manufacturing force testing applications including tension, compression, flexural cyclic, shear and friction. The Starrett FMM Digital Force Testers are part of the new Starrett L1 Line of entry level computer-…

781BXT and 770BXT AccuBore Electronic Bore Gages

The L.S. Starrett Co. has introduced two new Bluetooth-enabled series of electronic digital bore gages with a range of accuracy and convenience features for increasing measurement throughput when inspecting internal hole dimensions. The 781BXT AccuBore electronic bore gages are a trigger-operated gaging system, and the 770BXT electronic bore gages…

Entry-Level, Computer-Based, Force-Testing Products

The L.S. Starrett Company has introduced a comprehensive line of innovative, entry-level, computer-based, force-testing solutions for applications ranging from load limit and distance testing to break limit, time average, cyclic count and duration testing, constant hold and more. Optimized for production and quality control testing, the versatile…

HVR100-FLIP Benchtop Vision Measurement System

The L.S. Starrett Co. has announced the introduction of the HVR100-FLIP, a new large field-of-vision (FOV) benchtop vision measurement system that is capable of being used in either a vertical or horizontal orientation, features a high-resolution digital video camera and minimal optical distortion for accurate FOV measurements of up to 90mm (3.65…

SR200

The new SR200 Surface Roughness Tester from The L.S. Starrett Co. is a powerful, full featured instrument that can be used either freestanding (on horizontal, vertical or even inverted surfaces) or bench-mounted with fixturing for batch measurement and laboratory applications.

MetLogix M3 Touch Screen Control

The L.S. Starrett Co. announced its benchtop optical systems are now available with the MetLogix M2 Touchscreen Control, and that The Company's EZ manual vision systems can be equipped with MetLogix M3 Touchscreen Control.

4-Port Gage Multiplexer

The L.S. Starrett Co. announced its 4-Port Gage Multiplexer line and SmartCable for a fast and easy way to connect a measuring tool to a PC.

SR100 Surface Roughness Tester

The L.S. Starrett Co. announced its portable SR100 Surface Roughness Tester.

649 Series

The L.S. Starrett Company has introduced its patented 649 Series Spindle Square for tramming the head of a vertical milling machine.