J.W. Winco Inc.

Lockable indexing plungers GN 814 of stainless steel have the same basic functions as JW Winco’s tried and tested selection of indexing plungers. What’s new is the clever addition of a locking function for greater safety and security. This is accomplished with a lock integrated into the black plastic head. On types A and AK, the plunger pin is…
GN 742.5 Fluid/Fill Drain Plugs, GN 738.5 magnetic plugs and GN 7440 fluid sight glasses are made of AISI 316L (A4) stainless steel. Winco offers the premium sight glass in standard sizes from M16 to M42 and G⅜ to G1¼. Other thread diameters are available on request. Naturally, the same applies to the threaded plugs GN 742.5 and GN 738.5.
The outer race of the ball bearing is embedded in the POM plastic of the guide roller during the molding process. Each roller is machined to precise dimensions for an exact runout, which makes cylindrical and convex shaping of the running surface possible. Convex rolling surfaces compensate for alignment errors by preventing them from running on…
As the latest addition to the Hygienic Design product family, JW Winco now offers the spacers GN 6226. These standard parts easily avoid duplicate mounting surfaces, which are problematic and time-consuming in terms of cleaning and sealing. The HD product range, therefore, continues to grow, with new parts joining the existing range of knobs, U-…
The most recent indexing plunger development is pneumatically actuated. In addition, the part also detects both end positions with just a single sensor. This makes the GN 817.7 a logical advancement over the manually operated indexing plunger GN 817.6. The GN 817.7 can replace the GN 817.6 without changing dimensions or signal processing. The new…
The pneumatic clamps of the GN 860 series now have hardened, ground bearing bushings and tempered bearing pins for significantly reduced wear. No meaningful alterations were observed in testing for over 250,000 cycles. Structural reinforcement of the sheet steel housing reduces wear-inducing vibrations during operation, which makes a difference…
These guide rails are assembled from precisely matched components: linear guide rails GN 2492, the matching cam roller carriages GN 2494 and the separately available wipers of TPU plus the individual rollers with three different bore types. The exceptionally stable guide rails are produced in a rolling process and can be mounted using the typical…
The recently added couplings of aluminum and stainless steel include designs for positive and non-positive connections. Multiple bore diameters, various, stiffness and hardness levels of the coupling body as well as an optional keyway allow very specific customization to the given use case. In general, all couplings compensate for offsets and…
More than 75,000 standard parts can be found in this handbook. You will find our popular sellers as well as brand new products  - including toggle clamps, shaft collars, concealed multiple-joint hinges, and hygienically designed components, including ones made of metal detectable plastics or antibacterial materials.
The machine foot GN 36 uses the weight of the machine to create a very stable and robust connection between the threaded stud and the foot. The threaded stud is not connected to the foot plate. The second machine foot GN 37 from Winco also has a central fastening hole running clear through. This allows use of an anchor bolt. The anchor secures the…
The quick release fastener consists of two elements: the coupling GN 1050 and the tailored threaded stud GN 1050.1. A safety locking button protects the coupling from being accidentally opened. When pressing the button, the sleeve can be moved axially to unlock a stud inserted into the notch on the inside. At the same time, a red ring becomes…
The core of these joints is always the locking plates with their precisely aligned serrations as well as their adjustment based on positive and nonpositive connections. Alongside the exact serration shape, the division of the teeth is also very important. Winco relies on typical tooth configurations, which allow important and specific adjustments…
GN 415 is available in three sizes between 0.87 and 1.54 inches (22 and 39 millimeters) wide, each with two spring strengths. The two available slide types and the wedge-shaped or cylindrical, rounded thrust pad not only hold parts with side pressure but also exert an additional downward force. All thrust pads can be rotated around their long axis…
Wherever flaps, lids, covers or hoods must be closed quickly, easily and reliably, these robust toggle clamps are the ideal choice. They can even be secured with padlocks. The thread on the latch bolt allows for simple adjustment of the travel distance to ensure precise actuation of the lever.
It is hardly possible to do without these small tools for adjustment when striving for perfectly horizontal alignment of machines, mechanisms or instruments. And even after the initial setup, spirit levels still come in handy during regular operation to show whether the positioning is still correct. Spirit levels can be used almost anywhere. In…
Depending on the application, the stainless steel adjusting screws are available in a variety of thread diameters and lengths and can be optimally fastened to the production machine in combination with bearing blocks GN 828 from Winco. Once the optimal setting has been found, the adjusting screw can be locked in place with a stainless steel …
For heavy duty applications, for example, try hinge GN 237.3, a compact, heavy duty hinge of stainless steel. With a 180° range of motion, these hinges can stand up to even high dynamic wear—regardless of the mounting orientation—thanks to special shim washers. Depending on the selected type, the hinge bands also have centering extensions that…
The new GN 8170 stainless steel indexing plungers are intended for use in areas requiring sanitary equipment. They are available in lock-out or non-lock out types with a sealing lock nut that creates a totally hygienic version or without a sealing lock nut.
Even if pins appear simple at first glance, JW Winco has consistently demonstrated that this type of standard part can still be improved on in plenty of ways. For instance, the recently introduced versions GN 113.11 and GN 113.12 are ideal for narrow spaces thanks to the L-handle on one side. As usual, the two balls in the pin are unlocked by…
The use of touch screens, panels, displays, and monitors on production machines has now become common practice and is defined by the VESA standard for mounting monitors. Winco utilizes this standard to create a practical interface in the form of a monitor mount that is coordinated with the existing portfolio. The monitor mount is focused on the…
Stainless steel assembly pins from the GN 2342 series are available in all common diameters from 8 to 20 millimeters and in various standardized lengths. Three different end washer forms and the selection by means of a specific code number between assembly pin with and without transverse spring cotter pin holes diversify the series even further.…
In addition to the restoring torque, the functional hinge can also withstand great mechanical stress since it is made of a particularly durable high-performance polyamide plastic, and therefore boasts of particularly high mechanical strength. The aluminum rotating sleeve and stainless steel torsion spring offer maximum wear and corrosion…
The standard parts specialist JW Winco introduces the new Lift and Turn Compression Latch for holding doors, covers and hatches closed. It is operated in two steps with an ergonomic, powder-coated T-handle in black or gray. When folding the T-handle in or out, a stroke of 5 mm is initiated on the rotating latch to generate the required pressure…
The austenitic AISI 316L (A4) stainless steel receives its high resistance to chlorides and acids primarily from the chromium, nickel, and molybdenum constituents. This predestines the AISI 316L (A4) standard parts from Winco for use on ships and other offshore sites, in swimming pools with chlorinated or mineral-rich waters and, anywhere else…
Indexing plungers very often fulfill safety functions, but this isn’t the only time when it is important to obtain feedback about their position. With the new series GN 817.6, JW Winco also allows automated status checks.
JW Winco combines mechanical and electrical functions in standard parts to offer the new GN 422 U-handle with power switching and indicating functions, as well as matching accessories.
Machine feet, articulated feet, leveling feet, corrosion resistant stainless steel and elegant forms: The range of leveling feet available in the JW Winco portfolio is extensive. And it continues to grow because the requirements only appear simple until you take a deeper look.
JW Winco is expanding its mounting clamps selection with new elements that will ensure simpler, more optimal and more flexible clamping of system-specific components.
JW Winco Inc. offers GN 936 slam latches zinc die-cast, with and without lock. The design of the GN 936 slam latches enable doors and closures to close effortlessly.
JW Winco Inc. announced it has expanded its line of GN 113.10 heavy-duty ball lock pins stainless steel, with stainless steel shank AISI 630. The GN 113.10 stainless steel rapid release pins have an extreme load capacity and are used for quick fixing, connecting and locking of various parts and workpieces.
JW Winco Inc. has expanded its line of GB-FP wing nuts nylon plastic, with tapped through insert.
JW Winco Inc. offers WN 100.1 T-handle inch size rapid release pins with stainless steel Sshank.
JW Winco Inc. offers an expanded range of rod end bearings, including GN 648.1/GN 648.2 steel zinc-plated, tapped type or with threaded stem and GN 648.5/GN 648.6 stainless steel, tapped type or with threaded stem.

JW Winco Inc. has recently introduced WN-913.3 inch size steel set screws, with brass or nylon tip.
JW Winco Inc. offers an extended range of Shaft Collars that include a variety of different configurations. The products include semi-split shaft collars GN 7062.1 with extension tapped holes, GN 7062.2 with flange holes, and GN 7062.3 with damping washer, along with two-piece shaft collars GN 7072.1 with extension tapped holes, GN 7072.2 with…
JW Winco Inc. offers GN 124.1 stainless steel magnetic quick-release pins. The GN 124.1quick-release Pins are used for quickly connecting various parts and workpieces that are made of materials like iron and steel. A neodymium magnet is recessed into the underside of the bolt and axially retains the bolt in its inserted position.
JW Winco Inc. offers GN 7237 stainless steel multiple-joint hinges with internal mounting brackets and an opening angle of 180°.
JW Winco Inc. announced the introduction of steel and stainless steel locking toggle clamps. The RoHS-compliant GN 820.3 horizontal acting toggle clamps, with a horizontal mounting base and safety hook latch, have a safety function whereby, during closing, a spring-loaded safety hook latch ensures a secure locking connection. This prevents the…
JW Winco Inc. offers GN 927 clamping levers with eccentrical cam, in tapped type and threaded stud versions. The RoHS compliant GN 927 clamping levers with eccentrical cam are used for rapid clamping and releasing operations.
JW Winco Inc. has available GN 115.9 latches with safety function, zinc die casting, operation with key, not lockable.
JW Winco, Inc.offers GN 6342 washers with axial friction bearing, stainless steel.
JW Winco Inc. offers GN 126 and GN 126.1 zinc die-cast flat adjustable tension levers in steel and stainless steel, with tapped or plain bore insert or threaded stud.
JW Winco Inc. offers Inch Size GN 784 Mounting Clamps with Swivel Ball Joint, Aluminum. The RoHS compliant mounting clamps with swivel ball joint allow precise and variable adjustment of the ball pivot within the rotation range.
JW Winco Inc. has available GN 509.4 heavy-duty ball transfer units without flange.
JW Winco Inc. offers GN 187.4 stainless steel serrated locking plates. By using these RoHS-compliant serrated locking plates, standard components can be interlocked and firmly set at a defined angle.
JW Winco Inc. offers stainless steel leveling feet, with inch size threaded stud and turned base. Bases are available with mounting bores (GN 23) and without mounting bores (GN 21).
JW Winco Inc. offers GN 310 steel and stainless steel gear level handles in inch and metric sizes. Both versions of the gear lever handles are RoHS compliant.
JW Winco Inc. offers GN 852.3 steel and stainless steel latch-type toggle clamps, heavy duty type, with safety hook. The latch-type toggle clamps, which are RoHS compliant, are compact in design and can be used to ensure high holding capacities.
JW Winco Inc. announced it has available GN 223 steel control levers with round through-bore, with or without keyway and square through-bore versions.
JW Winco Inc. offers GN 196 aluminum angle connector clamps in metric sizes. These clamps offer many more application opportunities within the expansive range of tube clamps currently offered.
JW Winco Inc. offers GN 414.1 metric size, steel, safety indexing plungers with push-button, click-type lock and pin in the retracted position.
JW Winco Inc. offers GN 342.1/342.2 metric size, tapped and threaded, stud-type, steel, vibration-damping leveling mounts. The specified load for these RoHS compliant leveling mounts features a recommendation up to the point the damping element can be permanently subjected.
JW Winco Inc. offers GN 214.2 metric size, rapid release pins with plastic push button, steel shank, securing pins and pull ring. The RoHS compliant rapid release pins are used for quick assembly, connecting and locking of various jig and fixture systems.
JW Winco, Inc. offers GN 20 leveling feet in hygienic design, with mounting holes.
J.W. Winco Inc. offers GN 516.5 metric size, stainless steel compression latches. The RoHS-compliant compression latches have a closing mechanism that transfers the rotary movement of the operating element (key) into a 90° turn and then into a 6 mm linear stroke.
J.W. Winco Inc. offers RoHS-compliant GN 425 metric size, steel round cabinet "U" handles With tapped blind-holes.
J.W. Winco Inc. offers GN 414 metric, stainless steel, safety indexing plungers with pin in protruding position. These RoHS compliant safety-indexing plungers are used when the inadvertent retraction of the plunger pin is to be prevented.
J.W. Winco Inc. offers GN 2184 edge protection profiles. The RoHS-compliant GN 2184 edge protection profiles are installed on the front edge of metal sheets and plates, protecting the surfaces from damage by sharp edges.
J.W. Winco Inc. offers GN 1024 metric size steel or stainless steel spring cotter pins.
J.W. Winco Inc. offers GN 817.8 metric size, steel indexing plungers with removable pin lock-out or non lock-out type. The RoHS compliant GN 817.8 indexing plungers are designed so that special versions of the indexing pins can be made economically in smaller unit quantities.
J.W. Winco Inc. offers GN 784 metric size, aluminum mounting clamps with swivel ball joint. The GN 784 aluminum mounting clamps, which are RoHS compliant, allow precise and variable adjustment of the ball pivot within the rotation range.
J.W. Winco Inc. offers GN 2180 and GN 2182 edge-protection seal profiles. These RoHS-compliant seal profiles, which can be used to seal doors, covers and hatches, are pressed by hand onto the front of metal sheets and plates.
J.W. Winco Inc. offers 316L stainless steel GN 139.5 hinges with safety switch. The RoHS-compliant hinges with integrated safety switches are for use in monitoring doors and covers of machines and equipment. Opening the door activates the switch contacts, which causes an interruption in a protective circuit via broken contact (NC) and at the same…
J.W. Winco Inc. offers GN 2280 bull's-eye levels, adjustable, with mounting threads. The GN 2280 bull's-eye levels, which are RoHS compliant, are used to check the horizontal position of jigs, machines, devices, appliances and instruments.
J.W. Winco Inc. offers GN 303 (with steel components) and GN 303.1 (with stainless steel components) zinc die cast adjustable levers with push-button, threaded-stud type. The adjustable hand levers with push button, which are RoHS compliant, have proven to be ideal wherever parts have to be clamped in a confined space or in a particular lever…
J.W. Winco Inc. offers GN 254 inch and metric size stainless steel vibration/shock-absorption mounts, conical type. These RoHS compliant vibration/shock absorption mounts are also known as shock absorbing mounts, vibration mounts, antivibration mounts, vibration bobbins or rubber bumpers.
J.W. Winco Inc. offers GN 612.3 stainless steel, square, weldable, cam-action, indexing plungers. These RoHS compliant cam-action indexing plungers are best utilized when the pin needs to be retracted.
J.W. Winco Inc. offers GN 706.4 steel, aluminum or stainless steel split set collars in metric sizes with adjustable hand levers for tool-less clamping. The split set collars can safely and simply be assembled with high clamping forces via the adjustable lever without damaging the surface of the shaft the collar is being mounted on.
J.W. Winco Inc. offers GN 820.4 steel horizontal acting toggle clamps with safety hook latch, including a vertical mounting base. These RoHS-compliant horizontal acting toggle clamps, which are also available in stainless steel, have a safety function whereby, during closing, a spring-loaded safety hook latch ensures a secure locking connection.
J.W. Winco, Inc. offers GN 417 metric zinc die-cast indexing plunger latch mechanisms with rest position. The RoHS compliant indexing plunger latch mechanisms are used for applications where the plunger has to stay in its retracted position.
J.W. Winco Inc. offers GN 421.12 metric size, technopolymer plastic, hollow knurled knobs with a stainless steel threaded stud and swivel thrust pad. Temperature resistant to 194° F (80° C), the RoHS-compliant hollow knurled knobs have a ball end whose diameter is smaller than the core diameter of the thread.
J.W. Winco Inc. has available GN 3663 metric size, aluminum torque-limiting knurled knobs with steel hub. These knurled knobs are used when manually applied torque is to be limited.
J.W. Winco Inc. offers GN 810.1 “universal fit” steel vertical acting toggle clamps with vertical mounting base. The toggle clamp is case-hardened sheet metal, zinc plated, with a blue passivated finish.
J.W. Winco Inc. announced it now has available GN 810 “universal fit,” stainless steel, vertical-acting toggle clamps with horizontal mounting base. These vertical acting toggle clamps work according to the toggle principle, as the lever and clamping bar move in the same direction.
J.W. Winco Inc. offers GN 565.9 stainless steel arched pull handles, tapped or through-hole. These RoHS-compliant arched pull handles are made of 304 stainless steel and feature a matte shot-blast finish.
J.W. Winco Inc. offers EN 5337.9 technopolymer plastic lockable safety five-lobed knobs, with tapped brass insert, in metric sizes. These RoHS-compliant safety five lobed knobs are temperature resistant to 100° C (215° F), as well as resistant to solvents, oils, grease and other chemical agents.
J.W. Winco Inc. offers GN 237 zinc die-cast hinges with extended hinge wing, countersunk through-holes or threaded stud type. These RoHS-compliant hinges with extended hinge wings, used when wider spacing is required on the mounting surface for the bore holes, have a compact and sturdy design.
J.W. Winco Inc. offers GN 421.10 technopolymer plastic hollow knurled knobs with stainless steel nonmarring tipped threaded studs, with brass or plastic tip, in metric sizes.
J.W. Winco Inc. offers GN 437 zinc die-cast adjustable friction hinges. The RoHS-compliant hinge body is zinc die-cast, with either a black powder coated, textured finish or silver powder coated, textured finish.
J.W. Winco Inc. offers GN 129.5 stainless steel hinges in metric sizes. These RoHS-compliant hinges are used for doors that are flush with the frame on the outside.
J.W. Winco Inc. offers GN 115.10 latches with gripping tray, lockable, in metric sizes. These RoHS-compliant latches with gripping tray are used in applications that require a molded recess in addition to the latching mechanism, e.g. if operating elements are not allowed to protrude for reasons of space.
J.W. Winco Inc. offers GN 253 vibration/shock absorption mounts in inch and metric sizes. These RoHS-compliant mounts are also known as shock absorbing mounts, vibration mounts, antivibration mounts, vibration bobbins or rubber bumpers.
J.W. Winco Inc. offers No. 911LG-H100F long-arm hexagon key sets with ball end in inch sizes. These RoHS-compliant hex keys feature color-coding that enables them to be found faster and reduces mix-up.
J.W. Winco Inc., New Berlin, Wis., recently announced the availability of GN 854 Latch Clamps with Trigger Function in metric sizes. The RoHS-compliant latch clamps are said to feature a highly robust, sturdy and compact design that enables their use under demanding conditions, according to a Feb. 17 news release from J.W. Winco.
J.W. Winco Inc. offers GN 71752 fork heads (yokes), plain fork type, steel or stainless steel, in inch sizes.
J.W. Winco Inc. offers GN 927.7 stainless steel clamping levers with eccentrical cam with stainless steel contact plate, tapped type, in inch and metric sizes.
J.W. Winco Inc. offers GN 2404 steel telescopic linear slides with partial extension in metric sizes.
J.W. Winco Inc. offers GN 421 nylon plastic hollow knurled knobs with a threaded stud in new inch and metric sizes.
J.W. Winco Inc. offers GN 51.6 steel retaining magnet assemblies, disc-shaped, with two internal threads and rubber jacket, in metric sizes.
J.W. Winco Inc. offers GN 6336.13 nylon plastic star knobs with loss protection, tapped type, in inch and metric sizes.
J.W. Winco Inc. offers GN 350.5 and GN 350.5-NI steel and stainless steel leveling sets, with spherical washer and locknut, in metric sizes.
J.W. Winco Inc. offers GN 50.5 retaining magnet assemblies, disk-shaped, with tapped hole in metric sizes.
J.W. Winco Inc. offers GN 425.3 stainless steel cabinet U-handles, blank, no mounting threads in metric sizes.
J.W. Winco Inc. offers GN 453.1/GN 453.2 vibration/shock absorption mounts with stainless steel components, conical type, in inch sizes.
J.W. Winco Inc. offers GN 933.5 stainless steel hexagon head screws with a brass tip, nylon tip or spherical pivot in metric sizes.
J.W. Winco Inc. offers WN 580 inch size lifting eye bolts.
J.W. Winco Inc. offers GN 927.5 stainless steel clamping levers with eccentrical cam, with plastic contact plate, tapped type, in inch and metric sizes.
J.W. Winco Inc. offers EN 236 plastic adjustable alignment hinges suitable for inch or metric applications.
J.W. Winco Inc. offers GN 6319.1 steel and stainless steel spherical washers, seat and dished combined type in metric sizes.
J.W. Winco Inc. offers EN 239.6 Technopolymer plastic hinges with integrated safety switch in metric sizes.
J.W. Winco Inc. offers GN 440.1 steel leveling feet with fixing lug in inch and metric sizes.
J.W. Winco Inc. announced it offers DIN 6336-NI stainless steel hand knobs in inch and metric sizes.
J.W. Winco Inc. announced it offers GN 21 stainless steel leveling feet with a turned base, without lag bolt holes, in metric sizes.
J.W. Winco Inc. offers GN 129.2 steel and stainless steel hinges in metric sizes.
J.W. Winco Inc. offers GN 319.5 revolving ball knobs, long shoulder type, with stainless steel tapped shoulder in inch and metric sizes.
J.W. Winco Inc. offers inch sized GN 451.1/GN 451.2/GN 451.3 cylindrical-type vibration isolation mounts with stainless steel components.
J.W. Winco Inc. offers EN 450 ball-shaped door catches in metric sizes.
J.W. Winco Inc. announced it offers GN 119.3 door locking mechanisms with cabinet U-handle in metric sizes.
J.W. Winco Inc. offers GN 5345 and GN 5345.4 stainless steel three-lobe knobs in inch and metric sizes.
J.W. Winco Inc. offers GN 115.7 zinc die-cast door handles with a latch mechanism in metric sizes.
J.W. Winco Inc. offers GN 440.5 Stainless Steel Leveling Feet with Tapped Socket, Plain, with Elastomer Base Cap or Vulcanized Rubber Pad, in inch and metric sizes.
J.W. Winco Inc. announced it offers EN 239.4 plastic hinges with an integrated switch, in metric sizes.
J.W. Winco Inc. offers GN 227.4 A4 stainless steel spoked handwheels, in inch and metric sizes, with and without revolving handle.
J.W. Winco Inc. offers DIN 580-NI Stainless Steel Lifting Eye Bolts in metric sizes.
J.W. Winco Inc. offers EN 222 Technopolymer plastic hinges with four indexing positions, in metric sizes.
J.W. Winco Inc. offers GN 319.2 phenolic plastic revolving ball knobs, long shoulder type, tapped, in inch and metric sizes.
J.W. Winco Inc. offers GN 300.5 threaded stud-type stainless steel adjustable levers, in inch and metric sizes.
J.W. Winco Inc. offers GN 741 and GN 742 aluminum fill/drain Pplugs with metric and BSPP parallel threads.
J.W. Winco Inc. announced it offers GN 751-AL Aluminum Fork Heads (Yokes) with Shaft Safety Retaining Clip in metric sizes.
J.W. Winco Inc. has expanded its line of antivibration Mounts to a full range of inch and metric sizes.
J.W. Winco Inc. offers WN 648 self-lubricating rod end bearings in inch sizes.
J.W. Winco Inc. offers DIN 906 and DIN 906-NI threaded plugs with tapered thread, in metric sizes.
J.W. Winco Inc. offers a variety of U-handles that can be purchased in customized lengths and bends to suit particular applications.
J.W. Winco Inc. offers series GN 251.6 Steel Setting Bolts with Retaining Magnet, in metric sizes.
J.W. Winco Inc. offers six series of high quality, RoHS-compliant casters with inch size top plates, in addition to its extensive line of metric wheels and casters.
J.W. Winco Inc. now offers GN 822.6 Steel Mini Indexing Plungers, Lock-out and Non Lock-out Types, with Hidden Lock-in/Lock-out Positioning Mechanism, in metric sizes.
J.W. Winco Inc. offers GN 440.6 Stainless Steel Leveling Feet with Fixing Lug with Tapped Socket, With Plastic Base Cap or Rubber Pad, in inch and metric sizes.
J.W. Winco Inc. offers EN 237.1 plastic hinges in metric sizes.
J.W. Winco Inc. offers series GN 920.1 Wedge Clamps in metric sizes.
J.W. Winco Inc. offers series GN 139.1 hinges with electrical switching function, with safety switch, in metric sizes.
J.W. Winco Inc. offers GN 452.1 and 452.2 vibration/shock absorption mounts, cylindrical type, with stainless steel components, in inch sizes.
J.W. Winco Inc. offers GN 340.1 Steel Leveling Mounts with Lag Bolt Lug, in inch and metric sizes.
J.W. Winco Inc. offers GN 753 Guide Rollers in metric sizes.
J.W. Winco Inc. offers series WN 717.10 Stainless Steel Stubby Hand Retractable Spring Plungers in inch sizes.
J.W. Winco Inc. offers series GN 334 Aluminum Oval Tubular Handles, in inch and metric sizes.
J.W. Winco Inc. offers innovative oil drain valves, breathers and accessories with metric or BSPP parallel threads.
J.W. Winco Inc. offers GN 300.5 Tapped Type All Stainless Steel Adjustable Levers with Stainless Steel Components, in inch and metric sizes.
J.W. Winco Inc. offers series GN 343.1 Tapped Type Steel Base Leveling Mounts with or without Plastic or Rubber Base Cap, in metric sizes.
J.W. Winco Inc. offers GN 631.5 Stainless Steel Thrust Pads in metric sizes.
J.W. Winco Inc. offers series GN 430.1 ledge handles with lettering block, in metric sizes.
J.W. Winco Inc. offers GN 313 Spring Bolts in metric sizes.
J.W. Winco Inc. announced it offers series GN 6322 Workholding Pins, in metric sizes.
J.W. Winco Inc. announced it now offers GN 113.8 Heavy Duty Ball Lock Pins with Plastic T-Handle in metric sizes.
J.W. Winco Inc. announced it offers series GN 6321.1 Seating Pins in metric sizes.
J.W. Winco Inc. offers series EN 239.1 and EN 239.2 Hinges with Integrated Safety Switch, in metric sizes.
J.W. Winco's RoHS-compliant shoulder screws are cost-saving construction components for a wide variety of different uses.
J.W. Winco Inc. offers GN 119-NI Door Locks in Stainless Steel, in metric sizes.
J.W. Winco Inc. offers GN 333.8 Angled Handle Support Legs and GN 333.9 Straight Handle Support Legs in metric sizes.
J.W. Winco Inc. announced it now offers series DIN 6320 Jig Feet, in metric sizes.
J.W. Winco Inc. offers Straight Nylon Plastic Adjustable Levers in eight types, in inch and metric sizes.
J.W. Winco Inc. offers series GN 706.3 Threaded Set Collars in metric sizes.
J.W. Winco Inc. offers GN 852.1 Latch-Type Toggle Clamps with Locking Mechanism, in metric sizes.
J.W. Winco Inc. announced it now offersseries GN 113.7 Ball Lock Pins with Plastic T-Handle, in metric sizes.
J.W. Winco Inc. announced it now offers GN 516 Rotary Clamping Latches in metric sizes.
J.W. Winco Inc. offers series GN 817.4 Steel or Stainless Steel Indexing Plungers with T-Handle, with and without Rest Position, in metric sizes.
J.W. Winco, Inc. now offers an extensive line of bearing lock nuts and lock washers in metric sizes.
J.W. Winco, Inc. announced it now offers GN 612.8 Cam Action Indexing Plungers in metric sizes.
J.W. Winco Inc. offers series GN 7336.7 Clamping Knobs with Indexing Plunger as well as GN 7366.8, a version with safety function.
J.W. Winco Inc. offers series DIN 582-NI Stainless Steel Lifting Eyes with tapped thru hole, in metric sizes.
J.W. Winco Inc. offers GN 704 Quick Release Set Collars.
J.W. Winco Inc. announced it now offers series GN 809 Steel Clamp Mounts for Toggle Clamps.
J.W. Winco Inc. now offers series GN 6341 and GN 6341-NI Washers in metric sizes.
J.W. Winco Inc. announced it now offers series GN 702 Zinc Die-Cast Stop Locks with four indexing positions.
J.W. Winco Inc. announced it offers series GN 7336 Plastic Hollow Knurled Knobs, with steel tapped inserts or threaded studs, in metric sizes.
J.W. Winco Inc. offers series GN 331 and 332 Tubular Handles with Power Function in metric sizes.
J.W. Winco Inc. announced it now offers series GN 304.1 Tapped Type, Straight Zinc Die-Cast Adjustable Levers with Push Button, with Stainless Steel Components in inch and metric sizes.
J.W. Winco Inc. offers series GN 475 Adjustable Two-Way Connector Mini-Clamps in metric sizes.
J.W. Winco Inc. announced it now offers series GN 353 Vibration/Shock Absorption Mounts in metric sizes.
J.W. Winco Inc. announced it offers series GN 480.1 Solid Round Shafting and Hollow Round and Square Tubing in metric sizes.
J.W. Winco Inc. announced it offers series GN 608.5 Stainless Steel Indexing Plungers with Plate Mount, non lock-out type, in metric sizes.
J.W. Winco Inc. announced it offers series GN 343.2 Stud Type Steel Base Leveling Mounts with or without Plastic or Rubber Cap, in metric sizes.
J.W. Winco Inc. offers series GN 722.2 Square Spring Latches with Flange for Surface Mounting.
J.W. Winco Inc. now offers series AN 5672 Clamping Heads for Clamping Knobs or Screws, in metric and inch sizes.
J.W. Winco Inc. offers series GN 608.6 Metric Size Indexing Plungers with Rest Position, Plate Mount, Lock-out Type.
J.W. Winco Inc. offers series GN 351 Vibration Isolation Mounts, Cylindrical Type in metric sizes.
J.W. Winco Inc., a leading supplier of standard industrial machine components, announced it now offers series AN 7870.1 Stainless Steel Square Flange Bearings, as part of its new complete line of tube connection and conveyor components.
J.W. Winco Inc., a leading supplier of standard industrial machine components, announced it now offers series AN 350 Tube Expander Fittings, as part of its new complete line of tube connection and conveyor components.
J.W. Winco Inc., a leading supplier of standard industrial machine components, announced it now offers series GN 285 Swivel Clamp Connector Joints, as part of its new complete line of tube connection and conveyor components.
J.W. Winco Inc., a leading supplier of standard industrial machine components, announced it now offers series GN 298 Housings for Angular or T-Gears, as part of its new complete line of tube connection and conveyor components.
J.W. Winco Inc. offers metric size Retaining Magnet Assemblies.
J.W. Winco Inc., a leading supplier of standard industrial machine components, announced it now offers series GN 185 Countersunk Washers with Plastic Cover Disk.
J.W. Winco Inc., a supplier of standard industrial machine components, announced it now offers series GN 586 Safety Swivel Load Rings.
J.W. Winco Inc. announced it offers MN 130 series Pneumatic Power Clamps from Misati S.L.
J.W. Winco Inc., a supplier of standard industrial machine components, announced it now offers series GN 581 swivel lifting eye bolts.