Home

KSEM PLUS Modular System

October 13, 2012

The simple but effective KSEM PLUS modular system from Kennametal Inc. that combines the benefits of the KSEM modular drill (high feeds and length-to-diameter [L/D] ratios) with the benefits of an indexable drill (high speeds and low consumable costs) is for drilling large diameter applications. Kennametal is now extending its KSEM PLUS range by introducing new KSEM PLUS B1 Heads with DFC guiding pads to deliver reduced cost per hole in difficult drilling conditions.

The enhanced capabilities of the B1 Heads can handle drilling through stacked materials, inclined exits, drilling through cross holes, and interrupted cut conditions. With these new pads, KSEM PLUS B1 Heads benefit from accurate guidance of the head when drilling through cross holes with widths up to 50 percent of the drill's diameter. They also eliminate spiral marks and grooves and enable high-quality hole exits for reliable drilling from two sides when indexing drilling directions.

KSEM PLUS B1 Heads offer two effective cutting edges that work well at high feed rates to reduce the load per edge, compensate for radial forces, and prevent disk build up with only two chips per edge. They are available in standard sized from 28mm to 70mm and customized solutions from 28mm to 127mm.

Related Glossary Terms

  • feed

    feed

    Rate of change of position of the tool as a whole, relative to the workpiece while cutting.

  • interrupted cut

    interrupted cut

    Cutting tool repeatedly enters and exits the work. Subjects tool to shock loading, making tool toughness, impact strength and flexibility vital. Closely associated with milling operations. See shock loading.

Additional Products from Kennametal Inc.

NOVOsphere Cloud-Enabled Digital Tooling Data

Kennametal's NOVO digital process planning application has continued growing by supplying complete tool data (milling, turning, holemaking, tools, toolholders, spare parts, speeds and feeds, and much more) digitally, saving process planners, parts estimators, and manufacturing engineers hours…

KCSM30-Grade Insert

With approximately 25 percent longer tool life, the new KCSM30 milling grade from Kennametal directly reduces cost-per-part for shops working on titanium, according to the company.

GOdrill Microdrill

The GOdrill, Kennametal's first microdrill, works with multiple applications and effective drills multiple materials.

Beyond MR

New Beyond MR (medium roughing) inserts from Kennametal a synergy of geometry and grade, with smooth cutting action and higher wear resistance among the results.

KSSM8+ Facemills

With eight cutting edges, the new KSSM8+ face milling platform from Kennametal is focused on maximum metal-cutting performance in cast irons and steel workpieces at a low cost.

HPS Solid-Carbide Drills

With its new Beyond grade of fine-grain carbide and unique point geometry, the new HPS solid-carbide drill from Kennametal is reportedly achieving excellent metal-removal rates and long tool life, making it an ideal tool for holemaking in aluminum.

B55_DAL Drill

New stack drill from Kennametal for aerospace composite/titanium stacks can operate with through-coolant or without for superior chip evacuation.

KM4X100 Spindle Connection

By combining high clamping force and optimized interference levels, Kennametal says its new KM4X100 provides a robust connection, extremely high stiffness, and bending load capacity for greatly improved performance in machining high-strength alloys and other materials.

Beyond Shield

Advanced hard turning, or the use of superhard polycrystalline cubic boron nitride (PCBN) cutting tools for machining hardened ferrous materials like cast irons, is eagerly sought across a number of key manufacturing industries. Hundreds of millions of brakes discs, brake drums, flywheels, and…

NOVO

Tool selection, tool configuration, and the best applicable tooling advice based on the customer's part and process requirements are all at the touch of a few mouse clicks in Kennametal's revolutionary NOVO.