Videos

OPEN MIND discusses hyperMILL simulation, optimization and automation, with booth software demonstrations and the miniature burger demo part.

Kedar Bhagath of Tungaloy / NTK explains ISO-EcoTurn smaller inserts and their role in responding to carbide costs. He discusses the chipbreaker, performance and cost relationship in the original IMTS 2026 demonstration. Product statements are attributed to the speaker.

Austin Heisick, Global Workholding Product Manager at MATE Precision Technologies, introduces pneumatic vises and new workholding products at IMTS 2026, including a three-jaw chuck, a 52/96 combination base and wider vise jaws.

At IMTS 2026, Star Cutter’s Jeremy Hubbard discusses the compact FLX tool grinder and its automation options, while demonstrating key machine-control features.

Sponsored Ready to optimize your cutting speeds & productivity? Feedback on implementing ISCAR’s MAXOUT Strategy using ISCAR’s QUICK2CUT product is here. See how these tools are changing the factory floor.

Smartforce Student Summit's Cat Ross introduces Camp CHAMP, a hands-on advanced manufacturing experience where students see how a part gets made from start to finish. At the College of DuPage host site, 24 students rotate through six stations, explore manufacturing career pathways, and leave with one finished part.

On today's episode of The Daily Grind, Rob Layng is joined by Erik Vermeulen of Kurt Workholding for a conversation about workholding and practical manufacturing insight. The Daily Grind is produced by Cutting Tool Engineering. Fresh Roasted Coffee: Use code DAILYGRIND10 for 10% off.

On today's episode we continue our series on Workholding, and we are joined by Austin Heisick of Mate Workholding! Today we will be showcasing Mate's offerings and what they can do for YOU! We did it!!! We secured a coffee deal!! "The Daily Grind" now has its own official coffee!!!!

On today's episode we wrap up our series on Workholding, and we are joined by Michael Ricketts and Tom Dang of Lyndex Nikken! Today we will be showcasing Lyndex Nikken's offerings and what they can do for YOU! We did it!!! We secured a coffee deal!!

On today's episode we continue our series on Workholding, and we are joined by Thomas Stimac of DeStaCo Clamps! Today we will be showcasing DeStaCo's offerings and what they can do for YOU! We did it!!! We secured a coffee deal!! "The Daily Grind" now has its own official coffee!!!!

On today's episode of The Daily Grind, Rob Layng talks with Michael Ricketts, Product Manager - Automation at Lyndex-Nikken, about zero-point workholding, faster changeovers, repeatability, custom solutions, machine tending, and the return on investment behind keeping spindles running. The conversation covers the ZeroClamp system, how repeatable fixture positioning can reduce setup time, where automation fits, and what shops should consider before investing.

On this episode of The Daily Grind, Rob Layng is joined by Ryan Lake, Sales Manager at CemeCon Inc., for a practical conversation about PVD tool coatings, HiPIMS, diamond coatings, edge preparation, surface finish, tool life and coating-system technology. CemeCon: The Daily Grind is produced by Cutting Tool Engineering.