Home

Beyond Blast inserts channel coolant through inserts

October 01, 2010

Kennametal Inc.'s Beyond Blast inserts channel coolant through the insert to the milling cutter/insert interface. This delivers coolant directly where the tool cuts the material to provide more efficient coolant delivery, heat transfer and lubricity, the company reports. The inserts are available for turning and milling applications. When turning titanium, Kennametal conducted tests using 100-psi coolant delivery and showed a 75 percent improvement in tool life compared to the same inserts with 100-psi flood coolant.

Related Glossary Terms

  • coolant

    coolant

    Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.

  • gang cutting ( milling)

    gang cutting ( milling)

    Machining with several cutters mounted on a single arbor, generally for simultaneous cutting.

  • lubricity

    lubricity

    Measure of the relative efficiency with which a cutting fluid or lubricant reduces friction between surfaces.

  • milling

    milling

    Machining operation in which metal or other material is removed by applying power to a rotating cutter. In vertical milling, the cutting tool is mounted vertically on the spindle. In horizontal milling, the cutting tool is mounted horizontally, either directly on the spindle or on an arbor. Horizontal milling is further broken down into conventional milling, where the cutter rotates opposite the direction of feed, or “up” into the workpiece; and climb milling, where the cutter rotates in the direction of feed, or “down” into the workpiece. Milling operations include plane or surface milling, endmilling, facemilling, angle milling, form milling and profiling.

  • turning

    turning

    Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.

Additional Products from Kennametal Inc.

NOVOsphere Cloud-Enabled Digital Tooling Data

Kennametal's NOVO digital process planning application has continued growing by supplying complete tool data (milling, turning, holemaking, tools, toolholders, spare parts, speeds and feeds, and much more) digitally, saving process planners, parts estimators, and manufacturing engineers hours…

KCSM30-Grade Insert

With approximately 25 percent longer tool life, the new KCSM30 milling grade from Kennametal directly reduces cost-per-part for shops working on titanium, according to the company.

GOdrill Microdrill

The GOdrill, Kennametal's first microdrill, works with multiple applications and effective drills multiple materials.

Beyond MR

New Beyond MR (medium roughing) inserts from Kennametal a synergy of geometry and grade, with smooth cutting action and higher wear resistance among the results.

KSSM8+ Facemills

With eight cutting edges, the new KSSM8+ face milling platform from Kennametal is focused on maximum metal-cutting performance in cast irons and steel workpieces at a low cost.

HPS Solid-Carbide Drills

With its new Beyond grade of fine-grain carbide and unique point geometry, the new HPS solid-carbide drill from Kennametal is reportedly achieving excellent metal-removal rates and long tool life, making it an ideal tool for holemaking in aluminum.

B55_DAL Drill

New stack drill from Kennametal for aerospace composite/titanium stacks can operate with through-coolant or without for superior chip evacuation.

KM4X100 Spindle Connection

By combining high clamping force and optimized interference levels, Kennametal says its new KM4X100 provides a robust connection, extremely high stiffness, and bending load capacity for greatly improved performance in machining high-strength alloys and other materials.

Beyond Shield

Advanced hard turning, or the use of superhard polycrystalline cubic boron nitride (PCBN) cutting tools for machining hardened ferrous materials like cast irons, is eagerly sought across a number of key manufacturing industries. Hundreds of millions of brakes discs, brake drums, flywheels, and…

NOVO

Tool selection, tool configuration, and the best applicable tooling advice based on the customer's part and process requirements are all at the touch of a few mouse clicks in Kennametal's revolutionary NOVO.