Product News

Featured

07/20/2024
With nanometer resolution and control over the tool grinding path, the MicroX ULTRA delivers a high level of surface and edge quality. This achievement is made possible through intelligent algorithms that operate collaboratively and in synchrony.
07/20/2024
With the 4-watt UV and green 10-watt marking lasers, the new V-Series offers higher performance and better precision than its predecessor models, but in a much more compact design. This allows for easy integration into existing production lines and more versatility in the design of production environments.
07/20/2024
The flat clamping fastener, with machining spacing tolerance of ±0.1 and repeatability of ±0.3, is made to pair with a locking receptacle, which is available separately. Plate thickness of 6 mm or more can be used with the fastener and receptacle. A clamping and holding force as high as 6.7 lb. (30N) can be achieved.
07/20/2024
Key to the Electrak LL’s long-life architecture is a brushless motor, a high-load ball screw assembly, a brake solution that does not wear, and IP69K (static) and IP66 (dynamic) compliant sealing. This combination enables duty cycles of up to 100 percent, up to 600 km of travel life, and up to one million cycles – more than ten times that of electromechanical actuators without these features. The new configuration options for the Electrak LL augment its industry leading durability with advanced control, integration, higher voltage and higher speed options.
07/20/2024
The Surface Measure 1008S aims to disrupt the surface measurement processes across a wide range of industries, offering unprecedented precision and accuracy, even with in-line and near-line shop floor applications. The SM1008S leverages a propriety Mitutoyo optical system alongside our traditional sensor technology to deliver versatile performance that includes 2D profile measurements and comprehensive 3D dimensional inspections.
07/20/2024
The improved zirconia alumina and aluminum oxide blending discs also deliver better performance and product life. In addition, the expanded blending disc portfolio provides more connection types, with all of the grain options in the lineup now available in Type S and Type R connections. All the discs are now available with a resin fiber or cloth backing. The resin fiber backing helps reduce the pressure an operator must apply to the disc to maximize the cut rate. It also helps retain the grain on the disc, increasing disc life. The cloth backing offers a more comfortable disc that gives the operator greater control of material removal. The Weiler Abrasives blending disc portfolio also includes a line of aluminum discs that remains unchanged.
06/24/2024
Vargus, a global leader in threading, grooving, and deburring solutions, proudly introduces the FS Line—an economical range of fully sintered inserts designed to meet the needs of diverse industries. This new line includes 62 of the most popular profiles for both external and internal threading, available in various sizes and threading standards, including ISO Metric, American UN, Whitworth, NPT, BSPT, and API Round.
06/12/2024
The T-shaped and L-shaped pins are available in pin diameter sizes of 3/16", 1/4", 5/16", 3/8", 1/2" and 5/8". And metric versions of 5, 6, 8, 10,12 and 16mm. The grip length (usable length) measured from the bottom of the handle to the top of the locking ball ranges from 1/2" up to 6" and from 10mm to 100mm depending on the diameter. Three shank materials are available.
06/12/2024
With enhanced thickness and speed capabilities, the XPR460 sets a new standard for precision and productivity. The system delivers superior performance in cut quality, thickness capacity, and cutting speeds. This innovative technology ensures consistent part quality from the initial cut to the last, delivering superior cutting versatility for mild steel, stainless steel, and aluminum.
06/12/2024
Currently available for Kyocera’s popular GBA external and SIGE internal grooving systems, the new PR20 Series ensures precision and longevity in every cut. The innovative multi-layered structure of MEGACOAT NANO EX not only increases the durability of the inserts but also maintains superior cutting performance throughout extended use. By optimizing the balance between hardness and toughness, these new grades set a new standard across a variety of grooving operations, helping machinists achieve consistent, high- quality results while reducing tool changeovers and downtime.
06/12/2024
The jaws of the exceptional Bench Vise swivel 360° on the base and can lock in any position. Its unique shaped body houses the straight-line pull, super strong power tunnel that assures that the spindle and nut will never wear out. Made from 65,000 PSI ductile iron, the vise is 50% stronger than all gray iron vises and 20% stronger than competitive ductile iron vises.
06/12/2024
The 30-tool magazine provides flexibility for milling and drilling applications. The machine accommodates BT-40 shanks and includes a precision cam drive that achieves ±0.08-mm (0.0032") positioning accuracy. The tool change arm is waterproof, preventing coolant from entering the arm during use. Users also have the option of adding a pallet changer to avoid the downtime associated with part loading and unloading.
06/12/2024
ARIA’s Standard Base option is designed for various industry applications where flexibility and mobility are a must. The Machine Tool Base is designed for tending CNC Mill, Lathe, and Swiss applications. Both bases are suitable for Mitsubishi Electric collaborative, vertical/articulated, and SCARA robots. Included in the ARIA package is an FX5 PLC, an external 120V outlet, casters with jackscrews, a network switch with an external EtherNet port, an Operator station w/button pan- el, floor mounting brackets, and much more.
06/11/2024
Thomson miniature metric ball screws accomplish this with a unique multi-liner return system that maximizes the number of circuits and loaded balls in the nut. A miniature metric system with a multi-liner return system, for example, deploys 168 balls in eight circuits to support 7.6 kN of static load, as compared to a single-liner design, which would use 84 balls in four circuits to support only 4.2 kN. Maximizing the number of balls within a single nut also extends the life of the system by spreading the load across multiple points.
06/11/2024
The EZ-AutoCart, part of Lyndex-Nikken’s EZ-Automation product line, easily automates CNC machine tending of CNC lathes, mills, and similar machines. The EZ-AutoCart machine tending solution enables machine shops to streamline machine tending with minimal effort; no-code automation empowers manufacturers to easily operate the EZ-AutoCart. Results include significantly boosting spindle time and enhancing overall machine efficiency.
06/11/2024
The M5250 cutter is effective for milling steel, cast iron, stainless steel, aluminum and other non-ferrous metals (ISO P, K, M and N workpiece groups), as well as materials with difficult cutting properties. Unlike other full-effective helical milling cutters, the XTRA∙TEC® XT M5250 can also be used for full slotting, shoulder milling, pocket milling and ramping. The positive rhombic basic shape of the face insert makes ramping possible.
06/11/2024
Dillon Chuck Jaws can provide both standard and special pie jaws in 1.5mm x 60°, 3.0mm x 60°, 1/16th x 90°, and 3/32 x90° serrations, American standard and metric tongue and groove, and acme and square serrated key type mounting interfaces.
06/11/2024
FISCHER USA Inc. has expanded its repair services and exchange programs to include third-party spindle brands in the North American market.
06/11/2024
Skiving tools can be used in a variety of gear applications including the production of ring gears, shafts with internal and external splines and splined shaft profiles. EMUGE-FRANKEN Skiving Tools have no restrictions regarding the material to be machined and are highly suitable for the soft machining of internal and external gears, as well as hard machining. The skiving tools can be used on turning/ milling centers with B or A axes (swivel axes).
06/03/2024
The MaxiMill – 211-DC has 60% longer tool life compared to tools with standard cooling. Further, despite the complexity of the coolant holes inside the tool body, the MaxiMill – 211-DC is compatible with standard adapters with through-coolant supply without requiring any standard coolant on the chip breaker.