Product News

BIG KAISER’s modular CK/CKB system allows for versatility in the length of tooling combinations, up to a maximum of 10 times diameter and can run on nearly every major spindle interface. All tools are coolant-through and have three different insert holder options per head size. The tried-and-true EWN analog head features a dial with Ø.0005"/div setting accuracy (.0001" w/ Vernier).

Round smooth, round serrated, hex smooth, and square smooth sizes are available for W&S (all sizes), S-style (all sizes), Gisholt, Jones & Lamson, and Martin collet pad types, allowing more varied geometries can be securely gripped.  The ability to quickly change between sizes allows shops to expand their machining capabilities, increase their machine cycles by up to 30%, and maximize production.  Emergency collet pads that machine like top jaws are stocked for custom workpiece applications. 

The mini version has all the proven centroteX technology, however with an additional advantage: Actuation takes place with just one screw; thus, you save even more set-up time, and this system was designed to enable a robot to quickly change the clamping device. With lesser tightening torque than is required with the large variant, the centroteX M, the centroteX S can be assembled more quickly and this is executed with the highest repeatability and at the same time it also offers more ergonomic operation.

The XY base system is made of two 3-Phase motor powered V-417 linear stages with travel ranges from 204 to 407mm. Integrated absolute-measuring linear encoders provide better reliability, while eliminating the need to reference. A granite base plate is available for stability and can hold the G-901 EtherCat-based controller with ACS driver module. PI supports customers, system integrators, and machine builders to quickly configure and integrate the appropriate system, reducing design and development time while optimizing the outcome.

Two new grades have been added to TungCut to enhance its capacity in exotic materials: AH8005 insert grade, featuring strong coating adherence to its carbide substrate, eliminates notch wear that typically occurs during the machining of heat-resistant superalloys (HRSAs). New geometries include DGS inserts with 0.05 mm and 0.10 mm (.0002″ and .0004″) corner radii. These sharp cornered inserts allow lighter cutting and precision grooving/ parting-off of small parts advantageous in Swiss machine applications.

MeasurLink’s Collection Scheduler is a module that allows the user to track measurement collection times for multiple active or suspended runs on that Real-Time station. The module displays tiles for each run and shows several color stages based on checkpoints to keep measurements on track. In addition, an email can alert the supervisor if no measurement is started within specified time.

To streamline access to Product Manufacturing Information (PMI) and metadata, hyperMILL® 2021.1 offers a new import function that retrieves face quality information and metadata when importing CAD data from neutral or native formats, and attaches data to the imported faces in hyperCAD®-S, making the information available to hyperMILL® and its machining processes. 

The AT960 laser tracker can be transported easily, unpacked quickly and powered up in minutes to deliver high-performance measurement almost anywhere. Featuring wireless communication and a battery operation option, the integrated-technology design of the AT960 reduces setup time drastically.

The PTD HX can deliver up to 70% more holes in moderate conditions. The versatility of the industry’s “Go-To” jobber drill extends beyond medium strength materials, delivering 18% more holes in heavy conditions and up to 30% more holes in light conditions.

Every grinder provides four to seven times longer duty cycle under load and eight times less speed degradation than the  competition. The grinders provide smooth, quiet power for grinding cleaning, deburring, chamfering and sharpening.

Simcenter 3D continues to further improve its powerful unified and shared engineering platform for all simulation disciplines to help users gain full value of the benefits that simulation provides in terms of cost, speed and impact to innovation. Introducing new enhancements to the AI (Artificial Intelligence) driven user experience, new simulation types as well as refinements in accuracy and enhanced performance speed.

Premium Ceramic Grain - provides a cooler cut for a longer lasting disc; 50 Grit – less emphasis on aggression with refined surface finish; 36 Grit – best combination of stock. Works well on stainless steel & carbon steel, weld bead removal, chamfering and beveling, flame-cut steel removal, edge grinding and deburring.

This Intellistat is activated with a comfortable, ergonomic short throw trigger which requires minimal effort. Constructed with a low voltage transformer converting 120V to 24V, it was designed to ensure user safety, in addition to using an EXAIR engineered air nozzle to maximize efficiency and meet OSHA requirements for sound level and dead-end pressure. It is equipped with a red/green LED to signify proper functionality, as well as a hook for easy hanging and storage.

Accure·tec adaptors are ideally suited for the Walter Xtra·Tec® XT milling cutter range. This makes the system highly versatile. For example, for components with deep cavities in aircraft construction and aerospace industry in general, as well as the automotive, energy, die/mold, and general metalworking industries. Users can benefit from both the vibration damping and a system with low noise levels. 

It is suitable for coating and repairing components up to 500 mm in size, for cylindrical components up to a meter long and for the near-net-shape production of semi-finished products. The AM Cube can be provided with up to 3 deposition heads with patented, hardwired energy, material and data supply. Max. workpiece dimensions are: 3-axis: 1,000 x 400 x 500 mm; 4-axis: Ø 300 x 1,000 mm; and 5-axis: Ø 500 x 500 mm.

Athena was initially launched by iTSpeeX, LLC in the spring of 2018. Since then, the voice assistant—who interacts with machine tool operators via a machine’s existing control screen or a separate display—has expanded to include over 500 commands designed to make machine operators more independent and more productive. She is able to listen to voice commands, provide instructional content, perform complex machine functions quickly and walk through vital checklists.

With an ultralow profile of 40 mm and extremely flat design, ZeroAct is ideal for any zero-point application especially those where the z-axis travel of the spindle is critical. The ZeroAct features rapid open and closing of the modules and simultaneous actuation with one simple twist of the wrist generating 15kN clamp force. Easily actuate workpieces onto a table or adapter with a low stack-up of 38.1 mm greatly increasing the z-axis travel.

The nodding head spindle and direct-drive B-axis rotary table allow the DHF 8000ST to handle a complete range of machining and turning processes from roughing to finishing in a single setup. This ability to attack parts from all sides provides increased parts accuracy. In addition, the configuration makes quick work of multi-face workpieces and the 5-axis simultaneous machining of complex shapes.

The FORTiS design is built upon industry-proven RESOLUTE™ encoder technology and provides high resistance to the ingress of liquids and solid debris contaminants. It features an extruded enclosure with longitudinally attached interlocking lip seals and sealed end caps. The readhead body is joined to a sealed optical unit by a blade, which travels through the lip seals along the length of the encoder.

Available in 1018 steel, stainless, 6061 aluminum, or specified alloy materials, in standard or custom blanks.  Soft jaws or hardened (heat treated) jaws in HD or HDL vises.  Made in the USA in ISO 9001:2015 facilities, with industry leading lead-times.  Dillon Vise Jaws are available with industry standard hole patterns that fit most manufactured vises including Chick, Kurt, TE-Co, Toolex, and Palmgren.