Product News

Requiring no cables, the portable, manually operated, metrology grade index table is compatible with any make of portable measuring arm, not just LK's 6- and 7-axis FREEDOM arm range, which comprises 34 models. The 11.8-inch (300 mm) or optional 19.6-inch (500 mm) diameter table is quick to set up on a work surface, after which the operator secures the part to be inspected onto the surface with the aid of pre-drilled, threaded fixing holes or integral clamping magnets.

The MD344 Supreme and the MD340 Supreme three-flute versions both feature a 38° helix, while the MD340 Supreme four-flute has a 39°/41° variable helix, the MD340 five-flute version features a differential or unequal pitch.

The M936 maximizes the output of machines most customers use, explained Steve Avers, IMCO’s Technical Support Manager. With conventional low-horsepower machines, this free cutting action means the M936 cutter can run to the machine’s upper capacity limits.

The AccuThread T3 is now available in larger UN and ISO sizes up to 1”-8 and M24x3.0. Machine coding for the new sizes is included in Insta-Code, Allied Machine’s online thread mill program generator.

The MaxiMill 273 combines all the advantages of positive and negative inserts in one cutter that boosts stability and cost-effectiveness while reducing vibration for superior surface finishes. With an approach angle of 44.6o and a maximum feed rate of 2 mm/rev., the MaxiMill 273’s high insert thicknesses and strong obtuse corner angles improve stability and contribute to excellent system reliability.

The sliding locks are particularly ideal for clamping in tight areas with non-swiveling handles. The body is made from nickel-plated 1045 steel. The handle is made from nickel-plated 4140 alloy steel, quenched and tempered. The push bar is made from 1045 steel.

The digital service is built as a progressive web application for easy access via web browser on a PC, tablet, or smartphone. It can also be combined with other services such as 8760 support, preventive maintenance, and software maintenance agreements for optimized solutions throughout the entire life cycle. myFastems is available for all current Fastems automation systems from January 2023 and will be pre-installed for new systems in the future.

Waterjet cutting works as simply as it is effective: the cutting head directs a fine jet of water at high pressure of up to 6,000 bar, a jet diameter of 0.38 to 1.02 millimeters. In this stress-free cutting process, the material particles close to the surface are cut off without any heat being introduced into the material. This process is an optimal solution for temperature-sensitive and thick materials with complex geometries.

The QC16 line offers toolholders with 16x16 mm square shanks and the matching modular cutting heads. The new line features an enhanced coupling that is capable of sustaining high cutting edge repeatability and tool rigidity when used for applications generating greater cutting loads that conventional QC12 line was not able to provide reliability with

The compact stainless steel adjustable bracket can be installed into a customer’s process. Operations requiring both hands to package, test or assemble parts now remain static free. The nozzle is equipped with an LED indicator to assure proper functionality while employing EXAIR-engineered air nozzles to maximize efficiency and meet OSHA requirements for sound level and dead-end pressure. Made from durable static dissipative polycarbonate and featuring a non-marring nozzle, the Intellistat assures its usefulness in applications such as PCB or electronics manufacturing.

PunchDrill features patent-pending geometry with an innovative chip breaker which produces short chips to control machining forces. The new drill also has newly developed surface treatments and a hard diamond-like coating specially designed for this application to provide reliable chip removal and increased process reliability. When high-speed PunchDrill is used at the recommended feed and speed, axial force is reduced by half.

The height of the frame is based on the size of the part. The components present in the set permit a maximum set-up height of 300 millimetres. With add-on sets, the frame height can be extended in increments of 100 or 200. The part to be measured is held within the frame by hinged brackets.

DoMultiRec multifunctional milling cutter with center cutting capability enables a single tool to perform multiple milling operations, including shouldering, pocketing, and drilling. The DoMultiRec inserts to ensure strong and sharp cutting edges during various milling and drilling operations.

EasyNest Online software works automatically while allowing users to manage specific situations, guiding them in order to guarantee smooth program execution. Users can create a ready-to-cut nest and generate NC code for tool paths in minutes and without any training. EasyNest Online is available through the password protected InduSuite.com application interface. All application-generated data is securely stored in the cloud and accessed globally with a connected device.

The IDC and IDF series Digimatic Indicators have new designs and functions. Improvements include higher resolutions down to 20μinch / 0.5 μm, a built-in Calibration date warning, larger LCD and “analog” bar, and new S1 output (bidirectional communication) which allows settings to be changed through the new USB ITPak 3.0 software (free and paid versions).

A universal and flexible CNC system, the SINUMERIK ONE is distinguished by its high-performance hardware, a redesigned user interface and numerous options now included as standard. With a wide range of functionality, it is suitable for use in a wide range of technologies. The Sinumerik ONE sets standards in terms of dynamics, accuracy and network integration.

The Acoustic Performance Measurement (APM) system is capable of monitoring the parameters of ultrasonic frequency and power in-line at each processing station and for each batch. Special directional microphones are used for this, which are placed in a fixed position at the edge of each tank, and directed towards the centre of the bath surface. Thus, measurements are carried out without any movement or contact, ensuring reproducible results and enabling them to be precisely assigned to the batch concerned. Analysis, evaluation and storage of the data are carried out by the software of the innovative measuring system.

The RFID transponders are available as freely writeable and preconfigured versions. A transparent window on the PITreader card enables users to still read the LED status indicator when the card is held up to it. If the company already uses RFID-capable cards, these can also be used in conjunction with PITreader card unit. In this case, users need only one card for multiple functions.

A PVD-coated cemented carbide grade, AH8015 features an extremely hard high-aluminum content multilayer coating that is combined with a tough dedicated carbide substrate. The grade provides the insert with a well-balanced wear and chipping resistance.

The DAX® linear encoder is suitable for measuring positions in many applications, including injection molding machines, presses, automotive machinery, printing and packaging machines, wind, hydro and solar plants, in wood processing, or medical technology.