Home

HGAIR/L and HFAIR/L Face Grooving Adapters

January 01, 2014

ISCAR is further extending the application range of the current HGAIR/L and HFAIR/L face grooving adapters. This range applies to both diameters and grooving depths of 3 to 6mm inserts.

The new adapters were designed mainly to cover the larger diameters and deeper grooving range which was not covered by the currently available tools. They should be applied on larger parts such as pump hubs, hydraulic parts, turbine parts, engine pistons, etc.

Related Glossary Terms

  • grooving

    grooving

    Machining grooves and shallow channels. Example: grooving ball-bearing raceways. Typically performed by tools that are capable of light cuts at high feed rates. Imparts high-quality finish.

Additional Products from Iscar USA

ITA (Iscar Tool Advisor)

Profitability from machining a part is dependent on the machine type, cutting tool, cutting conditions and the interaction between them. ITA (ISCAR Tool Advisor) is a user-friendly, web-based tool selection software that is constructed upon a unique mathematical algorithm.

HELIDO S865 FSN mill

Iscar Metals Inc. has expanded its popular HELIDO milling cutter family to optimize facemilling, especially for cast iron. The new HELIDO S865 FSN mill has a 65<sup>o</sup> lead angle to minimize burr formation and edge breakout, which can complicate cast iron applications.

HELIDO H400 RNHU 1205 Inserts

Iscar Metals Inc. says its 11mm profiling insert does the job of a bigger one, thus enabling finer-pitch cutters for smoother profiling and lower chip loads.

CUT-GRIP and HELI-GRIP Inserts

Iscar Metals Inc. says it has improved its line of CUT-GRIP and HELI-GRIP groove/turn tools with a new CVD-coated substrate that doubles tool life while raising productivity by 15 percent.

TANG-GRIP Blades

Iscar Metals Inc. offers a family of reinforced TANG-GRIP blades for the INDEX Model MS18C and TRAUB TNL and TNK mill/turn machines.