Home

HGAIR/L and HFAIR/L Face Grooving Adapters

January 01, 2014

ISCAR is further extending the application range of the current HGAIR/L and HFAIR/L face grooving adapters. This range applies to both diameters and grooving depths of 3 to 6mm inserts.

The new adapters were designed mainly to cover the larger diameters and deeper grooving range which was not covered by the currently available tools. They should be applied on larger parts such as pump hubs, hydraulic parts, turbine parts, engine pistons, etc.

Related Glossary Terms

  • grooving

    grooving

    Machining grooves and shallow channels. Example: grooving ball-bearing raceways. Typically performed by tools that are capable of light cuts at high feed rates. Imparts high-quality finish.

Additional Products from Iscar USA

CHAMIQDRILL

The ISCAR Chameleon line is back and it’s bigger with a diameter range from 1.3”-1.57”. The new innovative CHAMIQDRILL employs a new insert positioning and locking mechanism that eliminates the need for clamps or screws commonly found on drills for larger diameters. This design allows for easy…

Heli IQ Mill inserts

Iscar inserts suitable for numerous milling applications
Iscar Metals Inc. offers Heli IQ Mill inserts for numerous milling applications across a variety of industrial sectors. The three helical cutting edges reduce cutting forces and power consumption, according to the company. The inserts are now available in cermet for machining medium to hard…

MultiMaster endmills

Iscar Metals Inc. offers the MultiMaster endmills as a complement to its solid-carbide endmill family. A new cutter can be assembled by selecting a milling head, which carries inserts with the required shank diameter, length and shape.

ECO Inserts

Iscar Metals is introducing new small-sized cost saving inserts. In many turning applications, machinists tend to use larger inserts than are actually required for the machining parameters being applied. To fill the need, Iscar is introducing a wide range of ISOTURN small sized inserts, which…

Screw Lock Toolholders for 55-degree Diamond Inserts

Iscar Metals is introducing new SDNCN ...-13-SL and SDJCN ...-13-SL screw lock toolholders for 55-degree diamond inserts with a 7-degree clearance angle.

JHP Swissturn Toolholders

ISCAR is expanding the range of SWISSTURN square-shank toolholders by adding new tools for high pressure coolant and also tools without the internal coolant feature.

Tiger-IQ Grooving Tools

The DOVEIQGRIP line from Iscar Metals is an evolution of the successful TIGER wide grooving inserts family.

TANG-GRIP and DO-GRIP Parting Inserts

ISCAR is introducing the IC5400 carbide grade, featuring an effective means of parting and grooving stainless steel.

SD-SP15 Slotting and Groove Milling Cutters

ISCAR is introducing the SD-SP15, a new family of narrow slotting and groove milling cutters, featuring 1.25" diameter milling heads with 8 teeth in a width range of .125" — .250" for maximum depth of cut up to .315".

HM90 ADCT 1505 ...-CF Insert

The chatter or vibration in metal cutting poses an eternal challenge for manufacturers. The ISCAR products of the latest HIGH QLINE family of cutting tools offer an interesting solution: Indexable Milling Insert with an asymmetric shape.