Home

Heli Tang T490 Milling Cutter

December 12, 2016
Heli Tang T490 Milling Cutter

Iscar Metals Inc.’s Heli Tang T490 milling cutter for roughing accepts inserts with serrated, chip-splitting grooves. These grooves can improve performance when the machine power is limited or when evacuating chips from narrow slots or deep cavities, according to the company. The design enhanced machining efficiency when roughing, especially when tool stiffness is low because of a long overhang.
 

Related Glossary Terms

  • gang cutting ( milling)

    gang cutting ( milling)

    Machining with several cutters mounted on a single arbor, generally for simultaneous cutting.

  • milling

    milling

    Machining operation in which metal or other material is removed by applying power to a rotating cutter. In vertical milling, the cutting tool is mounted vertically on the spindle. In horizontal milling, the cutting tool is mounted horizontally, either directly on the spindle or on an arbor. Horizontal milling is further broken down into conventional milling, where the cutter rotates opposite the direction of feed, or “up” into the workpiece; and climb milling, where the cutter rotates in the direction of feed, or “down” into the workpiece. Milling operations include plane or surface milling, endmilling, facemilling, angle milling, form milling and profiling.

  • milling cutter

    milling cutter

    Loosely, any milling tool. Horizontal cutters take the form of plain milling cutters, plain spiral-tooth cutters, helical cutters, side-milling cutters, staggered-tooth side-milling cutters, facemilling cutters, angular cutters, double-angle cutters, convex and concave form-milling cutters, straddle-sprocket cutters, spur-gear cutters, corner-rounding cutters and slitting saws. Vertical cutters use shank-mounted cutting tools, including endmills, T-slot cutters, Woodruff keyseat cutters and dovetail cutters; these may also be used on horizontal mills. See milling.

  • stiffness

    stiffness

    1. Ability of a material or part to resist elastic deflection. 2. The rate of stress with respect to strain; the greater the stress required to produce a given strain, the stiffer the material is said to be. See dynamic stiffness; static stiffness.

  • tang

    tang

    Extended flat portion of tapered drill shank, endmill or other tool that allows maximum power transmission and proper positioning of the tool. Reverse shape of the machine-spindle slot into which it fits.

Additional Products from Iscar USA

ITA (Iscar Tool Advisor)

Profitability from machining a part is dependent on the machine type, cutting tool, cutting conditions and the interaction between them. ITA (ISCAR Tool Advisor) is a user-friendly, web-based tool selection software that is constructed upon a unique mathematical algorithm.

HELIDO S865 FSN mill

Iscar Metals Inc. has expanded its popular HELIDO milling cutter family to optimize facemilling, especially for cast iron. The new HELIDO S865 FSN mill has a 65<sup>o</sup> lead angle to minimize burr formation and edge breakout, which can complicate cast iron applications.

CUT-GRIP and HELI-GRIP Inserts

Iscar Metals Inc. says it has improved its line of CUT-GRIP and HELI-GRIP groove/turn tools with a new CVD-coated substrate that doubles tool life while raising productivity by 15 percent.

HELIDO H400 RNHU 1205 Inserts

Iscar Metals Inc. says its 11mm profiling insert does the job of a bigger one, thus enabling finer-pitch cutters for smoother profiling and lower chip loads.

TANG-GRIP Blades

Iscar Metals Inc. offers a family of reinforced TANG-GRIP blades for the INDEX Model MS18C and TRAUB TNL and TNK mill/turn machines.