Home

RSM solid-carbide endmill

January 01, 2011

ATI Stellram introduces the RSM solid-carbide endmill for machining walls, pockets and surfaces in titanium aerospace components. The profiling endmill is manufactured from micrograin carbide substrate. The sharp honed cutting edge with specific primary and radial clearance angles provides stress-free penetration in the cut, and the reduced-diameter shank allows maximum reach and workholding stability, the company reports. Long and extra-long versions can be ordered.

Related Glossary Terms

  • clearance

    clearance

    Space provided behind a tool’s land or relief to prevent rubbing and subsequent premature deterioration of the tool. See land; relief.

  • endmill

    endmill

    Milling cutter held by its shank that cuts on its periphery and, if so configured, on its free end. Takes a variety of shapes (single- and double-end, roughing, ballnose and cup-end) and sizes (stub, medium, long and extra-long). Also comes with differing numbers of flutes.

  • profiling

    profiling

    Machining vertical edges of workpieces having irregular contours; normally performed with an endmill in a vertical spindle on a milling machine or with a profiler, following a pattern. See mill, milling machine.

  • shank

    shank

    Main body of a tool; the portion of a drill or similar end-held tool that fits into a collet, chuck or similar mounting device.

Additional Products from Kennametal Inc.

HiPACS Drilling and Countersinking System

HiPACS for Aerospace Fastener Hole Drilling and Countersinking
The HiPACS drilling and countersinking system can be utilized on all machines typically used for aerospace applications. In less stable conditions such as robot end effectors, the diamond coated carbide drills offer excellent tool life and hole quality. PCD-tipped drills, on the other hand, excel…

FBX Drill

FBX Drill for Faster Aerospace Machining
The FBX drill is part of a tooling concept specifically developed to maximize metal removal rates and decrease cycle times when machining aerospace structural components. Quickly removing large amounts of material remains a challenge for these types of components. Traditionally, the first process…

PCD Round Tools

Line of PCD Round Tools for Aluminum Machining
Extremely sharp cutting edges and low-friction rake surfaces eliminate concerns over built-up- edge. Low friction machining also produces superior surfaces in finishing operations, such as reaming. Surface roughness of Ra 0,1–0,8 μm (0.0025–0.02 μ-in) is achievable – far superior to conventional…

HARVI I TE Ball Nose End Mill

HARVI I TE Ball Nose End Mill Delivers Lower Machining Cost Through Maximum Metal Removal
he HARVI I TE ball nose end mill is available in two different lengths, both with a diameter range from 2 to 20 mm (1/16" to 1"). The regular length is the first choice for 3D copy milling operations, while the long version offers sufficient length-of-cut (up to 4sD) for many applications…

HPR Solid Carbide Drill

HPR Solid Carbide Drill for Cast Iron Components
The drill’s patented point thinning, special gashing, and a 143°-point angle provide excellent self- centering capabilities and reduce thrust, keeping the drill running straight even at the highest feed rates. In addition, four margin lands deliver maximum stability when drilling cross holes and…

KCFM 45 Face Milling Cutter

Fine-Finishing Face Mill for Cast Iron Exceeds Highest Surface Requirements
With fixed and adjustable pocket seats, the new milling cutter provides the option for semi-finishing as well as fine-finishing applications, exceeding the highest surface quality requirements. With carbide, ceramic and PcBN inserts, this new tool is a flexible, cost-effective and user-friendly…

KenTIP FS FEG Insert

FEG Insert for Flat Bottom Hole Applications
Drilling flat-bottom holes is a challenge. So is drilling on inclined or curved surfaces, drilling into cross holes, drilling stacked plates, and drilling into cross holes, stacked plates and castings and other rough surfaces. Not anymore. Leveraging the success of its KenTIP FS modular drill,…

HARVI I TE 4-Flute Solid-Carbide Endmill

HARVI I TE 4-Flute Solid-Carbide Endmill
Kennametal announced the latest addition to its HARVI line of high-performance solid endmills, the HARVI I TE 4-flute solid-carbide endmill. With a radical new design, the HARVI I TE delivers outstanding performance in a broad range of materials, including steel, stainless steel, high-temperature…

3D-Printed Stator Bore Tool

3D-Printed Stator Bore Tool
Kennametal has developed a 3D-printed stator bore tool to meet growing customer demand for lighter weight tooling solutions used to machine components for hybrid and electric vehicles. E-mobility components are typically machined on small, low-horsepower CNC machining centers that require lighter…

TACU ER Units and Solid ER Collets

TACU ER Units and Solid ER Collets
Kennametal announced an expansion of the turret-adapted clamping units (TACU): ER-ready driven units in conjunction with a line of solid ER collets that are threaded to accept screw-on milling cutters.