Milling Cutters

With an installation of footprint of 25.3m2, the machine is the largest in SW’s repertoire. It features a working rage of 3,000 x 1,800 x 875 mm on the X-, Y- and Z-axes respectively. On each of these axes, the HSK 63 spindle is able to reach a rapid traverse of 120 m/min, with a chip to chip time of 4-4.25s (depending on which optional features a customer selects). So not only is the machine capable of machining large structural components made of light metal material such as battery housings and car chassis bodies that are in such high demand in the industry – but it does so at speeds much faster than anything offered by the competition.

The Xtra·tec XT M5012 is highly cost-effective thanks to inserts being offered in a fully ground configuration for maximum precision, or fully sintered configuration for maximum cost efficiency. The bodies are offered in either ScrewFit or shell mount and with two pitches for different applications.

Designed for applications including spotting and drilling, side milling, chamfering, slotting, grooving, and engraving, the new Carmex Multi-Function Milling Tool (MF) delivers economy and versatility, as well as superior cutting performance. Constructed of ultra-fine carbide grade for stability and wear resistance, the Multi-Function Milling Tool features a new generation of PVD coating for higher performance.

The M5137 Xtra·tec® XT boasts reduced process costs thanks to its Tiger·tec® coating and six cutting edges per indexable insert. This translates to simple tool selection and low cutting material costs​, and highly cost-effective operation due to low unit costs.

Extremely sharp cutting edges and low-friction rake surfaces eliminate concerns over built-up- edge. Low friction machining also produces superior surfaces in finishing operations, such as reaming. Surface roughness of Ra 0,1–0,8 μm (0.0025–0.02 μ-in) is achievable – far superior to conventional carbide tooling.

he HARVI I TE ball nose end mill is available in two different lengths, both with a diameter range from 2 to 20 mm (1/16" to 1"). The regular length is the first choice for 3D copy milling operations, while the long version offers sufficient length-of-cut (up to 4sD) for many applications, including shoulder milling when wall and floor finishing is required. 

The M2471 milling cutter, ideal for the aerospace and energy industries, boasts a high metal-removal rate even on low-performance machines thanks to its soft cutting geometries and positive cutting characteristics. It brings all the benefits of single-sided round inserts to double-sided round insert cutting. The insert and body are designed so that their overall stability is guaranteed during use of all eight cutting edges.

The need for such dimensions is increasing that’s why Mikron Tool has introduced a fractional inches diameter range for a large assortment of its drilling and milling cutter families. The selection is focused on materials such as stainless steel, titanium and superalloys. The range includes micro drills and micro mills of .016” and extends up to diameter .250”. From the high-performance small Crazy Drill Steel up to the cylindrical micro end mill Crazy Mill Cool, Mikron Tool offers a tool range that will satisfy most every need in a multitude of projects.