Milling Cutters

MC025 Advance and MD025 Supreme Solid Carbide Milling Cutters

The MC025 Advance is available in diameters from 1/8-1 in. (1-25 mm). A single grade is offered for universal applications for steel, stainless steel, cast iron and materials with difficult cutting properties as well as its ability to lower inventory costs.The MD025 Supreme solid carbide milling cutter boasts a high number of teeth for maximum productivity and high-feed face geometry. It is ideal for use on complex components.

New Light Cutting Face Mill Increases Productivity in Low HP Machines

Tungaloy's TungEight-Mill face milling cutter is for extremely light cutting with low power consumption, perfect for low rigidity and low horsepower machines with a BT-30 connection. TungEight-Mill incorporates single-sided positive inserts with eight economical cutting edges for heavy roughing to mirror finishing of various material faces.

Kyocera MEAS milling cutter demo

Kyocera Precision Tools Inc. has released a milling line for high-speed aluminum applications. The MEAS series is engineered with unique grooved insert pockets for added stability when machining at high speeds. Utilize simultaneous three-axis machining with a maximum ramping angle of up to 20°. MEAS allows a broad range of applications, from facing, shouldering, slotting and profiling to pocketing, ramping and plunging.

Kyocera Precision Tools Inc.

Double Turbo Square Shoulder Mills and Inserts

The Cutters Improve Roughing Operations and Reduce Power Consumption

This system features a highly accurate geometry with the most positive helix angle possible to reduce the likelihood of surface mismatches and enable impressive 90-degree angle accuracy. With such precision, finishing cycle times are significantly shortened or, in some cases, completely eliminated. Double Turbo cutters are available in 19 metric variants ranging from diameter 40 mm to 125 mm and 16 inch variants ranging from 1.50" to 5".

STC-MTV Five-Axis Mill-Turn Machining Centers

The two new machines, models MTV 1000 and MTV 1250 offering 8,000 rpm/700 ft lbs. of torque and 4,500 rpm/1,200 ft lbs. plus 200 bar/3,000 psi high pressure coolant for integrated turning, are joining the STC-MTV family of horizontal machining centers.

Duratomic TM grades TM1501, TM2501 and TM3501

Duratomic TM Grades for Stainless Steel Turning

These three Duratomic grades feature innovations based on world-leading coating chemistry developments adapted to manufacturers’ application needs. In addition to offering superior mechanical and thermal properties, this coating also provides the chrome-colored Used-Edge Detection technology, which makes every edge count and reduces potential waste.

Xtra·tec XT M5130 Shoulder Milling Cutter

The mill is best suited to machining steel, stainless steel, cast iron, non-ferrous material and materials with difficult cutting properties. This wide range of uses results in lower tooling and administrative costs, as does the fact that its 90° approach angle dramatically decreases the need for finishing operations. Walter Tiger·tec cutting tool materials, the high number of teeth, and small indexable inserts also makes it ideal for workpieces with small machining allowances.

335.18 and 335.19 Cutters

Designed for slotting operations between 4-12 mm and cutting-off operations from 4-8 mm, the 335.18 and 335.19 cutters are available in metric diameters ranging from 32 mm to 125 mm. Inch diameters range from 1.25" to 4" with widths from 0.156" to 0.50". Inserts for these cutters are available with the full range of grades, edge geometries and corner radii (0.2-6.0 mm, 0.008"-0.236"). For the greatest flexibility and ease of use, as well as superior radial and axial reach, the 335.18 and 335.19 cutters utilize modular Combimaster connections.

Iscar features multiple milling, drilling demos during recent seminar

Iscar Metals Inc. in early March presented a series of milling and drilling demonstrations during the company's 2020 Milling & Holemaking Seminar at its Tech Center in Charlotte, North Carolina.

Leading the seminar for Iscar were Craig Ewing, national product specialist for drilling, and Bryan Stusak, national product manager for milling. The two-day event focused on the impact cutting tools can have on higher profitability. Or, in Iscar shorthand, Profit LOGIQ.

FaceMill-Diamond

The FaceMill-Diamond features an exceptionally high number of permanently brazed cutting edges for its diameter. The cutting edges are designed for a cutting depth of up to 10 mm. Furthermore, the robust tool body absorbs the vibrations generated during machining and prevents damage to the component surface.