Product News

Octane Chip Guards are made from a high temperature silicone and come in 10 foot lengths in a bright and attractive blue and in the most popular t-slot sizes, ( 9/16”/14mm, 5/8”/16mm, 11/16”/18mm, 7/8”/22”). The flexible silicone Chip Guards are durable and washable and reusable should you need a different setup. In stock now at KBC Tools & Machinery in The US and Canada.

Safety light curtains in the PSENopt II product range offer finger, hand or body protection for applications up to PL e in accordance with EN ISO 13849 and are available in lengths of 150 mm to 1800 mm. Just like the safety light curtains, the muting arms are extremely resilient to shock, collision and vibration thanks to their robust design. That makes them ideal for use in rugged industrial environments.

EMUGE MultiDRILL™ is made of a unique sub-micro grain carbide grade that is harder than conventional carbide grades for drilling, yet it retains the ability to withstand shock and chipping. MultiDRILL features advanced TIALN-T63 coating utilizing nano-layer technology with surface hardness exceeding standard TIALN-based coatings, for reduced friction at high temperatures.

Standard on the #9684510 lathe are 3 and 4 jaw chucks, splash guards, chuck and tool post safety guards and inch and metric gears for threading. Like all Palmgren lathes, it is built and inspected to the DIN 8606 toolmakers precision lathe standard.

Aside from having low energy consumption, the servohydraulic press is also considerably quieter. In addition, it only requires a tenth of the hydraulic oil needed by a conventional hydraulic press.

ProNest LT subscriptions for waterjet will support virtually any make or model of a waterjet machine, allowing users to easily insert the nesting component into their existing workflow. There are two waterjet subscription tiers to choose from.

One of the main advantages of the new CoroMill Dura aluminum-specific end mills is their versatile performance in all different types of roughing applications, while also offering finishing capabilities,” Wikström continues. “Up to 2×D full slot, pocketing, 5–20° ramping, shoulder milling and more — all with the same end mill.

The dual gripper system on the versaLoad allows manufacturers to reduce part loading times by as much as 50% when compared to a single gripper setup. This allows the automation cell to operate with maximum efficiency, enabling versaLoad users to boost productivity without having to increase headcount.

With a 30% thicker coating than the previous generation, the Pramet T9415 significantly improves tool durability by increasing resistance to wear and offers higher productivity by allowing for higher cutting speeds. Several testing users of the new grade have reported that their productivity has doubled while machining carbon and structural steels.

The PCD inserts impart the finest surface finishes while shoulder, face and slot milling. The tools enable precise machining with reduced cutting forces and minimal vibration tendencies. They have a low cost because of their extremely long tool life as a result of the cutting edge being made of the hardest known material. In addition, the PCD inserts provide the shortest machining times due to their ability to mill at high cutting speeds. The inserts can be used dry, with emulsion of MQL (minimum quantity lubrication).

The REV motorized broaching tool is designed for use on live tool lathes. Single machine set-up eliminates the need for secondary operation or outsourcing. REV tools are ideal for high production runs, offer easy installation and fast processing time. These tools are designed for maximum rigidity, offer long tool life and an excellent finish.

The gage is supplied in a carrying case with a program on a USB drive that runs in LK's CAMIO measuring and reporting software. The program includes DMIS measurement and alignment routines for bridge and horizontal arm CMMs, allowing the CCG cycle to run seamlessly on LK machines. However, it is easy for operators of other 3D measuring platforms using different software to program a probing cycle around the gage to check for machine accuracy.

The three performance levels encompass the product designations of T32 and T34 in thread cutting taps and T33 in forming taps. At the base level are universal general-purpose type taps. The second T34 mid-level range consists of higher performance taps that work well in a variety of workpiece materials, making them especially well-suited for high-mix/low-volume production environments with constantly changing parts and materials. The top performance level are material-specific thread cutting and forming taps such as those optimized for steel or other advanced materials.

The solution enables Mastercam users to simulate and verify G-code including controller variables, subprograms, expressions and canned cycles for a wide range of machine tools before the workpiece is mounted on the machine.

So how does Y-axis turning work? As the name implies, the new method makes use of the Y-axis, and all three axes are used simultaneously when machining. The tool rotates around its own center, the insert is placed for machining in the Y-Z plane and the milling spindle axis interpolates during turning. This allows intricate shapes to be machined with a single tool.

There are two stocked and standard product offerings where gundrills are delivered within 24 hours of the order. The SFGD Express program is for Single Flute Gundrills in diameters from 0.1250” - 0.7500” (3.175mm - 19.050mm) and lengths up to 48” (1219mm). The SCGD Express program is for Single Flute Solid Carbide Gundrills with standard ½” steel shanks in diameters from 0.0355”- 0.1969” (0.902mm - 5.000mm) in lengths from 4”- 12” (102mm - 305mm), depending on the tool diameter.  

Both bundles include API's Radian Plus Laser Tracker, which is known for its high accuracy and long-range measurement capabilities. Also available are API’s vProbe, a high-precision, non-contact measurement probe that is ideal for use in tight spaces and hard-to-reach areas or iScan3D, a high-speed handheld scanner with flexible probe locations for all part inspection or reverse engineering applications. Together, these products provide a complete measurement solution for a wide range of industrial and manufacturing applications.

The PM2 pinion option is available for gearboxes sizes 090 to 200 and, like the PM1 pinions, is available for a total of four gearbox series with a flanged output shaft: Among them is the PFHE coaxial planetary gearbox from the Economy Line, which comprises durable and powerful standard gearboxes with an excellent price/performance ratio. In the case of the Precision Line, which provides the high accuracy of precision gearboxes, these are the PSFN and PLFN coaxial planetary gearboxes and the space-saving WPSFN right-angle gearbox. All PM2 pinions are manufactured at the Neugart parent plant in Kippenheim, Baden.

Available in three models, the VL 30-5X five-axis machining center, and VL 30, and larger VL 50 3-axis versions, this series features a 15 hp 50,000 rpm spindle accepting HSK E25 tooling for precise roughing and ultra-fine finishing. An integrated tool changer holds up to 90 tools.

Flow 5.0 includes checks and messages that identify possible errors before a build even starts, reducing the likelihood of customers experiencing failures in their builds. In doing so, engineers can be confident that a part will print successfully before the process begins. Flow also now includes labeling for objects.