Product News

Features a maximum measuring speed significantly faster than competitive CNCs. The combination of high speed and high acceleration dramatically reduces measuring time and cost. Users can set measuring paths for high speed scanning, 3D and active scanning of complex workpieces.

HALCON 20.11 will be released simultaneously for both the Steady and Progress editions. As a result, HALCON Steady customers can now access the many new features available in the last three Progress releases, including anomaly detection, the generic box finder, and optimized identification technologies.

The new portable unit brings features that were previously only available in PC-based systems to the mobile world. Features including automatic creation of measuring reports in PDF format, integration of a barcode or data matrix scanner, and printing reports to letter size paper are now all standard. An optional portable printer is also available. 

To withstand the harshest shop elements including coolant, water, chips, dust and dirt while retaining tool integrity, the new micrometers include an IP67 level of protection on sizes 0 - 4" (0 - 100mm) and on various application-specific models. A modern, ergonomic, insulated frame design on the new No. 733.1 0-1" outside micrometer is designed for comfort and ease of use, providing an optimal user measuring experience. In addition, the new Electronic Micrometers offer upgraded electronics, a longer battery life, an advanced locking mechanism and a large, easy to read LCD display. Industry 4.0 ready.

This photometer detects an optical input signal and converts it into a precision, logarithmic voltage signal with high resolution. The optical power meter is used to find the maximum optical intensity quickly when integrated in fully automatic, optical FMPA alignment systems. The logarithmic scaling of the output signal is particularly advantageous for fast scans because the signal strength can fluctuate by several orders of magnitude within a few milliseconds.

AIMS Metrology, a manufacturer of coordinate measuring machines (CMM) based in Dayton, Ohio, in July introduced its new Summit 10.10.10, a CMM engineered with a 5-axis REVO-2 dynamic scanning probe and 1 meter cubed capacity.

This compact system was designed with motorized XYZ-axes and enables measurements to be performed directly on large parts for user-friendly surface analysis, anywhere it is needed. The CM mobile is robust and reliable enough to be used on the shop floor or in the field, and provides consistently high resolution even over large measuring areas.

The trend toward miniaturization is unstoppable. Automotive parts, semiconductors, electrical components and medtech devices: in almost every industry, products now have to combine increasingly compact dimensions with higher performance. And that poses major challenges for manufacturers and suppliers, who have to achieve maximum accuracy when processing these high-precision lightweight parts.

The improved frame rate of the ImageIR 5300 ensures that users can use this model to solve a wide range of tasks in industry and science. Their modular design consisting of an optics, detector and interface module makes it easy to adapt to a wide variety of measurement scenarios. The integrated process and trigger interface enables the infrared camera to be synchronized precisely with external processes for analyses – and in the case of the ImageIR® 5300, these processes can readily be connected at maximum speeds.

The RFP projects a fringe pattern onto the part surface and the probe’s camera captures the variation in fringe pattern to build a point cloud of 3D surface data. The data cloud is then evaluated by the 3D metrology software to deliver the inspection results. Non-contact structured light inspection with the RFP delivers clear advantages over traditional tactile probing techniques for freeform surfaces and complex geometry, such as additively manufactured parts, aerospace blades and blisks, automotive cylinder head combustion chambers, and delicate surfaces not suited to tactile measurement. 

With the measurement of compressed and non-corrosive gases, it reliably displays three parameters at once by measuring the flow, pressure, and temperature. In doing so, it saves the customer money through improved energy management with the reliable detection of leaks. This new flow sensor is also very lightweight and compact, making it ideal for installation in tight spaces.

With magnetic tape adhered along the entire length of the linear guide, the IMScompact determines the position of the runner block by means of noncontact measurement, with an absolute precision of ±20 μm per meter and a repetition accuracy of ±1 μm at speeds of up to 5 m/s. 

It is best suited to the scanning of large parts with lower detail requirements, such as automotive parts. 
The Absolute Arm 7-axis system delivers tactile probing and laser scanning in a uniquely ergonomic package. It is the best choice for high-end portable measurement applications. The articulating arm offers unparalleled ease of movement and ease of measurement.  

Benefits for users include highly rigid and dynamic piezoelectric measurement technology, digital data that is resistant to interference from disturbance variables, and end-to-end communication all the way through to sensor level. IO-Link technology supplies users with real-time data to monitor the condition of their plants and measurement chains.

Based on successful microScan3 technology, the 2D safety sensor, nanoScan3, uses patented safeHDDM® scan technology. This enables the nanoScan3 to hold up well even in harsh or challenging ambient conditions. It is impervious to interferences like dust, contamination, and ambient light.

The S wide is a dedicated solution designed to rapidly measure large sample areas up to 300 x 300 mm (11.8 x 11.8 in). It provides all the benefits of a digital microscope integrated into a high-resolution measuring instrument. Extremely easy-to-use with one button data acquisition.

This laser scanner uses 3D reality capture. 3D reality capture is a process of scanning and capturing any site, for example, factories, buildings, crashes and crime scenes, in a 3D digital model, combining measurements and imagery. The model can be used for design and comparison purposes in various situations, capturing every detail with to-the-millimeter accuracy.

The L.S. Starrett Co. has introduced a newly designed rotary table springs force tester. The system is setup to test multiple springs in a single setup without the need for additional operator input as required when springs are tested one by one. The batch testing volume production approach saves time and significantly increases test throughput, while freeing up the operator to attend to other jobs.

Marposs has announced the availability of its Aeroel MecLab.X laser micrometer systems, providing ultrahigh accuracy diameter measurements for components such as electric motor shafts, gage or piston pins, hydraulic components or any number of ground or turned parts. The benchtop Meclab.X systems require no PC, making them highly suitable for the workshop environment and for most common applications.

Mitutoyo America Corp. announces the release of the new M2 2D processor as part of a new package with the PH-3515 Profile Projector. The M2 2D processor updates the PH-3515 Profile Projector with a new touch screen tablet and easier 2D processing for measuring dimensions.