Home

Beyond inserts introduced

July 01, 2010

The innovative Beyond platform of high-performance tool grades from Kennametal has garnered exceptional reviews from customers worldwide. Now the company is introducing the first Beyond inserts for holemaking applications. Three new grades are available: KCPK10, KCU25, and KCU40. The product portfolio covers SPPX/SPGX Drill Fix Square (DFS) outboard inserts, available in HP, FP, and MD geometries. Together with the DFS drill bodies, diameters range from 24.0 to 55.0mm (1.00 — 2.125 inch). Kennametal's DFS indexable drill platform offers the economy of a square insert having 4 edges in the outside pocket combined with the outstanding centering and high feed ability of a DFT trigon insert. The DFS indexable drill can be used in virtually any short-hole applications and materials performed on CNC lathes or machining centers. Achieving up to 20 percent or higher material removal rate (MRR) at the same tool life as standard inserts, the KCPK10 grade offers outstanding abrasion and crater-wear resistance for high-speed machining of steels and cast irons.

Related Glossary Terms

  • cast irons

    cast irons

    Cast ferrous alloys containing carbon in excess of solubility in austenite that exists in the alloy at the eutectic temperature. Cast irons include gray cast iron, white cast iron, malleable cast iron and ductile, or nodular, cast iron. The word “cast” is often left out.

  • centering

    centering

    1. Process of locating the center of a workpiece to be mounted on centers. 2. Process of mounting the workpiece concentric to the machine spindle. See centers.

  • centers

    centers

    Cone-shaped pins that support a workpiece by one or two ends during machining. The centers fit into holes drilled in the workpiece ends. Centers that turn with the workpiece are called “live” centers; those that do not are called “dead” centers.

  • computer numerical control ( CNC)

    computer numerical control ( CNC)

    Microprocessor-based controller dedicated to a machine tool that permits the creation or modification of parts. Programmed numerical control activates the machine’s servos and spindle drives and controls the various machining operations. See DNC, direct numerical control; NC, numerical control.

  • feed

    feed

    Rate of change of position of the tool as a whole, relative to the workpiece while cutting.

Additional Products from Kennametal Inc.

Turret-Adapted Clamping Units

Turret-Adapted Clamping Units
As machine tools become increasingly complex and the need to produce parts in less time grows, CNC lathe owners and managers must look to the latest technologies if they’re to improve shop floor efficiency. Isn’t it ironic then that one of the most productive of these solutions is far from new—in…

HARVI III Endmill

HARVI III Endmill
It started in 2015, when engineers at a major U.S.-based aircraft manufacturer kicked-off a challenge to determine which cutting tool manufacturer offers the best products for milling forged Ti-6Al-4V titanium. The company invited Kennametal and 10 other global tooling suppliers to the University…

Tools for Roughing and Finishing Cast Iron

Cutting Tools for Roughing and Finishing Cast Iron
Iron’s everywhere. The turbines in those big windmills popping up all over the place. Engine blocks, transmission cases, and turbocharger housings. The pumps that bring water to our faucets and the hydraulic manifolds that put the “move” into earthmoving machinery. Without iron, none of these would…

DUO-LOCK Modular Endmill

DUO-LOCK Modular Endmill
DUO-LOCK from Kennametal Inc. is a modular endmill with the performance of solid carbide. It uses a proprietary, double-cone locating surface similar to that of Kennametal’s KM or KM4X tooling design, assuring “not to exceed” radial runout values of 5 μm (.0002 in.) and Z-axis coupling…

KCSM40 Grade

KCSM40 Grade
Customers have been asking for a new carbide grade to machine titanium 6Al4V at higher cutting speeds compared to increasing feed rates or increasing depth of cuts in that result in increased cutting forces imposed on the workpiece, fixtures and machine spindles. The KCSM40 grade has an advance…

KenTIP FS Modular Drill

KenTIP FS Modular Drill
Some good ideas can be made even better. Much better. This was certainly the case when Kennametal engineers took the strength and versatility of their proven KSEM modular drill system and combined it with the ease of use and low feed forces of its smaller companion drill, KenTIP, the company…

Mill 16 Facemill

Mill 16 Facemill
As automakers strive for increasingly fuel efficient and environmentally friendly vehicles, they’re turning away from traditional iron favorites such as gray and ductile iron (GCI and DCI) to compacted graphite iron, or CGI. Also known as vermiculate graphite iron, CGI’s mechanical attributes meet…

KBDM PCD Facemilling Platform

KBDM PCD Facemilling Platform
Anyone who’s replaced a head gasket on an internal combustion engine knows a smooth, flat surface on both cylinder head and block is needed for proper operation. No one understands this better than automakers, who strive for predictable, controlled surface finishes and high production output,…

KM4X63 Quick-Change Modular Tooling

KM4X63
Kennametal Inc. says the bending moment of KM4X is substantially higher than any tooling interface available on the market, superior even to Kennametal’s own KM design. Kennametal has announced the KM4X tooling family has gained a 63 mm sibling, one aimed at a broader machine tool platform and,…

Mill 4-11 Indexable Milling Cutter

Kennametal is expanding its Mill 4 family with a new cutting tool, the Mill 4-11. Designed for smaller machining centers, the Mill 4-11 accommodates 40-taper CAT and BT, HSK 50 and similarly-sized spindles. Due to its free-cutting capabilities, it is ideal for successful metal removal in less-than-…