Drills

FINE BEAM Inserts

The latest additions include inserts with 0.8 mm (.032″) nose radius in versatile AH725 grade. 0.8 mm nose radius will provide the cutting edge with strength, preventing edge fracture for predictable tool life. In addition, AH725 enhances the insert’s wear resistance during machining of various materials, ensuring high precision and boosts productivity.

Precision Twist Drill (PTD)

To cover the breadth of applications within the MRO segment, there are drills for general purpose machine and portable drilling. These include the popular HSS R10 series for right hand drilling and HSS L10 series for left hand drilling. Also included are the carbide DC series of center drills. There is a specific selection for sheet metal drilling and spot weld drilling.

Solid Carbide Gundrills

Small diameter gundrills have resulted in cost savings. This was driven from tool life and throughput improvements, including several case studies that were done that resulted in doubling production capability

DrillMeister Chamfering Holders

DrillMeister offers the TIDCF chamfering holder that can be attached to the TID drill shank allowing chamfering and drilling in a single pass for reduced machining times. The chamfering inserts are available for 30°, 45°, and 60° chamfers. The new TIDCF holder line can accommodate smaller drills in diameters from 7.5 mm to 9.9 mm (.295" - .390") for improved machining processes.

Expansion of Grade AH9130 to DMP Drill Head Line

DMP drill head are expanded in diameters from 10.3 mm through 19.8 mm

This AH9130 grade expansion encompasses the DMP line of general-purpose drilling, succeeding the popular DMC drill head for precision drilling. Developed for drilling applications, AH9130 is a nano-multilayer PVD coating consisting of three distinctive layers.

EconoMaster Line of Drilling Units

EconoMaster Drilling Units for Value-Priced Production Use

The EconoMaster drilling unit features low power and air consumption, adjustable motor housing, adjustable total stroke up to 4”, hydraulic feed control cylinder, J33 taper spindle end, 0-1/2” drill chuck, electric front & rear position limit switches, belt tensioner and chrome-plated quill. Basic unit weight is 45 lbs.

Walter DC160 X∙treme Evo Advance solid carbide drill

The DC160 carbide drill features exceptional positioning accuracy. This is achieved with its innovative thin web at the point and rapid guidance in the hole due to the advanced positioning of the double margins. The drill’s unique point geometry, deeper chip gash and the new coating lead to a universal applicability in steels, stainless steels, aluminums and super alloys such as Inconel and Titanium alloys with exceptional tool life.