Home

Drills

Drilling Versatility with the DRV Magic Drill

What do you do when you have a 0.688" diameter drill and you need a 0.697" diameter hole? This sort of question is common in shops that have a limited selection of cutting tools. Kyocera's DRV Magic Drill series can accomplish a radial offset to drill larger than the existing tool. The 0.697" hole shown was drilled in 1018 steel with a S100-DRV0688-5-05.  Inserts were SCMT060205XMECA520D and SCMT060210XMIPR1535. Speeds and feeds used were 390 SFM, F.0016 IPR. The surface finish is very good due to excellent chip evacuation.

GEN3SYS XT Pro Material-specific Geometries and Coating Combinations Deliver Premium Results

GEN3SYS XT Pro high penetration drills feature inserts designed specifically for steels (P), cast irons (K), and non-ferrous materials (N). The material-specific inserts for steel and cast iron have AM400 series coatings providing increased wear resistance and tool life. Inserts for non-ferrous materials are coated with titanium nitride. Diameters range from 11 mm (0.4331 inches) to 35 mm (1.378 inches), and are available in 0.1 mm (0.004 inch) increments. The flute design improves chip evacuation and the coolant configuration directs additional coolant to the cutting zone.

OSG USA's A Brand Tooling Master Class

The A Brand® is a premium tooling brand that represents the quality assurance OSG guarantees to each and every customer. A Brand products (A-Drills, A-Taps and A-End Mills) are designed to exceed the evolving manufacturing needs for customers. Experience a new level of quality, reliability and satisfaction that can only be delivered by OSG’s A Brand tooling master class.

For more information visit OSG at http://www.osgtool.com/

TTD-Tritan Triple-Edge Replaceable-Head Drill

TTD-Tritan Triple-Edge Replaceable-Head Drill
Many versions of heat exchangers are used in different industries. After all, they help to make heat generated usable for other processes. In the case of recuperators, two liquid or gaseous media with different temperatures are pumped into separate circuits. A heat exchange takes place without mixing the media. Recuperators include bundle heat exchangers, which are usually made of metal and consist of a tube bundle that conducts a medium and an orifice baffle with a front tube plate through which a second medium flows.

ARCH -- an Industry Leader in Standard Cutting Tools for Manufacturing

ARCH Cutting Tools is a leader in standard cutting tools for manufacturing, providing a multitude of industries with the most trusted cutting tools in this competitive environment. When other manufacturers moved production out of the U.S., ARCH invested in the communities where they do business, delivering quality American made tools to their loyal customers.