The Grinding Doc urges shops to carefully determine where to start their rapid in-feed if they want to reduce cycle time for a cylindrical OD plunge grinding operation.
The video proves the point—YG-1’s ONLY ONE end mill provides superior cutting performance to cut where others can’t. Watch how coated carbide breaks down halfway through the cut and witness how HSS CO8 can’t stand the heat and stops dead in its tracks. And when it comes to unstable cutting conditions, the coated PM 60 ONLY ONE, stands up where brittle carbide breaks down. Need a tool to handle tough materials—see how the ONLY ONE can be your best investment at up to 30% less than the cost of carbide.
Stanley Kroll, sales manager, J.W. Done Corp., took a few minutes during EMO 2019 to provide CTE with a guided demonstration of the company's ORBITOOL deburring tool product line.
When a company is part of one of the largest tool manufacturers, merely employing good technology is not enough. That is why Fair Lawn, New Jersey-based Sandvik Coromant Co. needed to more efficiently track and manage tools and streamline production at its Mebane, North Carolina, plant. TDM Systems Inc. provides a solution with tool data management software.
Along with advances in software, materials, tooling and machine technology comes new machining guidance intended to help shops properly utilize said technology to maximize productivity. Among them is a milling strategy Seco Tools Inc. calls optimized roughing.
As a video supplement to the May 2013 issue of Cutting Tool Engineering magazine, Blue Wave Ultrasonics, Davenport, Iowa, filmed a demonstration of the ultrasonic cleaning process. CTE posted a slightly edited version of the video to its YouTube channel on April 16, 2013.
The Grinding Doc cautions shops about improving coolant in all grinding operations. Depending on the type of grinding and the job requirements, less coolant can be more.
Terry Iverson, author of Finding America's Greatest Champion, discusses manufacturing careers with a millennial who attended the Fall 2019 meeting of the United States Cutting Tool Institute.
Conventional metalworking fluids are effective at providing cooling and lubrication during machining, but they have critics. One is Fusion Coolant Systems Inc., which offers products for supercritical CO2 (scCO2) as an alternative to those fluids.
The Mazak HQR-250MSY Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume throughput.
Low Frequency Vibration (LFV) is Citizen’s widely applicable cutting technology designed to avoid the problem of spiraling chips, entanglement of chips and built-up edges.
Kennametal's five-flute, high-velocity aluminum roughing solid-carbide endmill — the KOR 5 — is said to increase table feed rates up to 66% compared to commonly used three-flute tools.
Kennametal debuts two new PCBN insert grades with double-sided inserts for materials up to 65 HRC. The KBH10B and KBH20B PCBN grades are said to deliver high productivity and long tool life when turning tool steels and other hardened materials.
Kennametal Inc. has developed a 3D-printed Stator Bore Tool to meet growing customer demand for lighter weight tooling solutions used to machine components for hybrid and electric vehicles.
Kennametal's latest addition to its HARVI line of high-performance solid endmills, the HARVI I TE 4-flute solid-carbide endmill features a radical new design.
