Product News

The EM-30 product series (153 ball BGA) complies with e.MMC-5.1 specifications and is fully backward compatible. It is designed for an extended temperature range of -40°C to 85°C and is suitable for use in harsh environmental conditions. The S-56(u) SD and microSD memory cards attain sequential read and write data rates of 95 MB/s and 74 MB/s, respectively. The cards are optimized for high-performance applications with random read IOPS of 2,200 and random write IOPS of 1,300.

Remote Service offers simple and fast assistance. For example, in the event of machine downtime, UNITED GRINDING North America customers can request service with the press of a button. The Service Monitor relieves those responsible for maintenance by clearly displaying all the important maintenance tasks based on the current machine's operating hours. Production managers can monitor the production output of the machinery at any time using the Production Monitor.

Along with E7, E45 features the brand-new fixed lens IntelliCentric™ optical system - a fully telecentric optical system providing super high-resolution images, perfectly suited for video edge detection metrology. The digital zoom allows for instantaneous magnification changes, while the standard all-LED lighting system illuminates parts from all angles. E45 features a generous stage to handle large parts or a variety of smaller parts.

The goal of the program is to minimize machine downtime and the program’s process is simple. When a customer runs a machine until it fails, they can send in their damaged assembly for an engineering analysis to determine if Riten can refurbish/repair to “like new” condition−or build a complete new unit. Riten also encourages customers using the specials program to keep a complete spare assembly readily available in stock. The goal is to have one on hand at all times to avoid machine downtime during the rebuild process.

Kurt DXH vises have a premium one-piece body design now standard on all Kurt general-purpose vises. Designed using Finite Element Analysis, the new body has 30% less horizontal (push back) deflection than previous DX models. Vises are available in three sizes: DX4H, DX6H and DX8H and reverse models. DXH Hydraulic Vises have the same bed height and keyway to the stationary jaw face as their DX-Series counterparts, along with internal improvements over older DX models including a redesigned nut, new brush seal design and a new bearing pack.

These lightweight yet quality plastic parts provide a high-end solution with defined load capacities. Depending on the tightening torque of the screw connections, JW Winco lists the axial extraction force, the radial torsional moment, and the rotation moment if an articulated axis is present. The connectors are designed to fully encompass typical construction tubes to create a nonpositive clamping connection.

Newly designed details in NCP version 4.3 offer even greater convenience when using the program. New or occasional users in particular benefit from the intuitive usability and will find design examples for each application with detailed descriptions. Handling of projects is facilitated, since the appropriate application and calculations already performed can simply be retrieved directly. By dragging files into the program, the user can easily open files and add designs.

The aluminium collars are much easier to machine compared to steel. This more readily enables customization, a requirement if the collar needs to fit specific shaft designs or dimensions, either for retrofit or new machine builds. Along with this capability, aluminium shares a similar anti-corrosion performance to stainless steel, ensuring increased durability.

The exact adjustment of the damper, made of a carbide rod supported in O-rings, is made from the outside via an adjustment screw. Adjustment is achieved by fine-tuning the pre-tension of the O-rings. This allows the boring bar to be precisely set according to the vibration occurring in each application. As standard, Horn offers the tools from stock in the length/diameter ratios 5 x diameter and 8 x diameter.

The TechniDrill 2.00-30-48 has a gundrilling diameter capacity of 2 inches (50.8 mm) and a maximum gundrilling depth of 48 inches (1219 mm). It features a 30 horsepower AC spindle motor and two-speed gearbox to provide versatile gundrilling performance. The workpiece is counter-rotated via pneumatically operated 3-jaw chucks to increase the accuracy of the gundrilled hole.

Especially for milling aluminium alloys and plastics, Horn offers the indexable inserts with polished rake faces on all four edges from stock to counteract the formation of built-up edges. In conjunction with the positive chip breaker geometry, the sharp ground cutting edge produces a soft cut and high surface quality. The special grade is designed for use with the ISO N material group. The inserts can be used in all cutter body variants.

Since users are holding the part for the base, setups are dramatically reduced. Pole extensions allow users to raise the piece from the magnet surface making the top, inner and outer diameters fully machinable. This process dramatically reduces part distortion due to clamping with ZERO distortion and allowing for far more accurate part processing.

The CorePlus gas connect console is positioned between the current Core and VWI (Vented Water Injection) consoles and introduces argon gas capability for customers that primarily cut mild steel. The gas console offers all Core console capabilities plus argon marking and an increase in piercing thickness with argon-assist enhanced piercing capability.

Continuously improved by customer input and rigorous usability testing, the new SPECTROLAB S LAS02 features proprietary CMOS+T technology to identify and measure, with high accuracy and precision, all elements in incoming, in-production, and out-going materials as well as in researching new materials. The new analyzer is ideal for primary and secondary metal producers, automotive and aerospace manufacturers, and makers of finished and semi-finished goods.

The evolution and ehnancement of SprutCAM X user interface will continue. "Less interface is better" sounds simple in theory, but it becomes an extremely challenging task when dealing with CAM software with thousands of features. For many years we have been striving to keep the UI as simple and lightweight as possible. In the last couple of years, we started to think about how to make the interface feel natural and comfortable to the human eye.With its lightweight interface, intuitive design and machine-aware programming technology, SprutCAM X 17 becomes extremely easy to learn and use as a CAD/CAM software.

The piston diameters range from 8.5 to 10 mm and provide 180 to 330 lb. clamping force. The push lock clamps come in orange or black plastic hands, as well as metal handles. They are ideal for applications such as positioning of guide rollers and positioning of fixturing tables.

Thanks to significantly reduced friction, this new procedure improves chip removal from the machining zone, while the cutting heat is dissipated even more quickly and effectively through the chips. Temperature increases on the cutting tool and in the workpiece to be machined can be effectively reduced, as can material buildup and galling on the cutting edge. The procedure is suitable for coated and non-coated tools alike.

Designed with low inertia cycling components makes the Posidyne clutch brake more efficient, requiring less motor horsepower to accelerate the load, and less torque to stop the load.  Their totally enclosed design is impervious to dust, chips, chemicals, coolants, caustic wash down, weather, and more, making them ideal for hostile environments.  They are field proven in diverse applications such as lumber mills, shingle plants, fiberglass insulation production, food processing, packaging, metalworking, and more.

Cosen Saws V-1822 is an exceptional entry-level cutting solution that is simple and reliable. Ideal for workshops and small-scale operations, this saw is easy to use and allows operators to control the entire cutting process manually. Cosen Saws V-2026NC & V-2230NC represent a significant step up in terms of efficiency and productivity. These versatile band saws replace manual operation with easy-to-use semi-automatic features, making it an excellent choice for medium-scale industrial applications.

The inserts feature three cutting edges at a 50° copying angle. Compared to the WL25 indexable inserts, which measure 25 mm per side, the WL17 inserts measure 17 mm per side. The WL25 inserts are now additionally offered in W0110-C Walter Capto tools and the W1211 QuadFit exchangeable head for Accure.tec anti-vibration boring bars.