Milling Cutters

Solid Carbide Milling Cutter

Due to their geometry and good chip breaking, the milling tools are suitable for machining numerous other materials. Due to the precise combination of the substrate, the macro and micro geometry as well as the IG3 coating, the milling system exhibits high performance and long tool life. The coating in particular offers high temperature resistance for machining steels alloyed with chromium, nickel and molybdenum.

Dove IQ MILL 845

Face Mills Carrying Double-Sided Square Inserts

High positive cutter pocket inclination. Rigid clamping due to dovetail pocket design secured by clamping screws. Coarse and fine pitch cutter configurations. Coolant holes directed to every insert on the cutters. Precise double-sided square insert. Eight cutting edges – each edge comprises a reinforced edge and a wiper flat for a high quality machined surface.

Supreme, Advance, Perform Milling Cutters

Solid Carbide Inch End Mills for Difficult to Machine Materials

The lineup of products consists of three categories of tools. Supreme tools indicate the highest level of technology and performance available. Advance tools indicate products efficiently balanced between price and performance and Perform tools are products that provide an economical solution with focused importance on price.

CTE Booth Visit with Horn USA @ Eastec

Horn USA's Adrian Noonan, technical specialist, tours kiosk after kiosk at the Horn booth during Eastec 2023, highlighting the newest innovations for broaching, narrow width slot milling cutters, form boring and internal grooving.

CTE Booth Visit with CERATIZIT USA @ Eastec

CERATIZIT USA's Chuck Somerville, sales engineer for cutting tools, provides a table by table overview of the company's cutting tools displayed at its booth during Eastec 2023.

CTE Booth Visit with MIKRON Tool @ Eastec

CTE Publisher Dennis Spaeth asks MIKRON Tool's Clive Komlenic, sales director, East, about the company's new micro milling tool, the CrazyMill Cool Micro. The new cutter is said to answer their customer's desire for a micro tool that displayed a lot of the same characteristics as MIKRON's larger mills that start at 1 mm.

High-Gloss Finish for Milling Cutters and Drills

High-Gloss Finishing Provides Extra Performance Boost for Special Tools

Thanks to significantly reduced friction, this new procedure improves chip removal from the machining zone, while the cutting heat is dissipated even more quickly and effectively through the chips. Temperature increases on the cutting tool and in the workpiece to be machined can be effectively reduced, as can material buildup and galling on the cutting edge. The procedure is suitable for coated and non-coated tools alike.

Expanded Diameter and Corner Radius in Tungaloy-NTK’s DoMultiRec

DoMultiRec multifunctional milling cutter with center cutting capability enables a single tool to perform multiple milling operations, including shouldering, pocketing and drilling. A uniquely designed insert integrates a center and peripheral cutting edge on one side of the insert; the same insert can be used either for the center or peripheral position for up to four indexings per insert.

Click here for more information about the DoMultiRed on the Tungaloy-NTK America Inc. website.

Performance at the highest level

With over 3,000 new products in inch sizes, Walter has expanded its industry leading line of solid carbide milling tools. The newest lineup of tools provide cost-efficiency for different milling processes including slotting, ramping, roughing and finishing. With unique geometries and improved coatings, there are tools for all applications and all materials.

M911, M913 and M928 Nine-Edged Milling Systems

Nine Cutting Edges for High Metal Removal Rate

The nine-edged milling systems M911, M913 and M928 are stocked in cutting widths from 1.5 mm (0.059") to 3 mm (0.118") as standard. The maximum milling depth is 3.5 mm (0.138") (M911), 4.5 mm (0.177") (M913) and 6.5 mm (0.256") (M928). The inserts are available with different coatings to suit the material to be machined. Due to its mass, the solid carbide tool shank ensures vibration damping during milling. All variants of the tool shanks are equipped with an internal coolant supply.