Video Reports

Whether you’re using low-horsepower equipment, high-speed machining centers or a 5-axis machine, POW-R-FEED M936 cutters give you the power to get more production out of every machine, every shift, every day.

This 30-minute webinar offers our readers an opportunity to take a deeper dive into the "Thread Without Dread" article published in the January 2023 issue of Cutting Tool Engineering. The article, which features insight from EMUGE-FRANKEN USA and Tapmatic Corp., maps out strategies for meeting the special challenges of putting screw threads in titanium.

AddMultiTurn – Front turning, back turning, profiling, and face turning with ONE SINGLE TOOL. Tungaloy's 6-corner inserts with the company's ultra-secure Y-PRISM clamping design for high versatility, economy, and productivity. Available in 80° or 35° corner angle.

A video from ARCH Cutting Tools offers guidance for effective chip evacuation, the proper method of holding the boring bar, and how to select insert geometry based on the cutting conditions.

Videos from BIG Daishowa that provide a closer look at the company's BIG KAISER CK Boring System as well as BIG KAISER's built-in Smart Damper technology.

For six years, in conjunction with collaborators at University of Virginia, University of Texas at Dallas, ColoradoSchool of Mines and the National Renewable Energy Laboratory, Lucy Pao – the Palmer endowed chair in the department of electrical, computer and energy engineering – and her team have developed the Segmented Ultralight Morphing Rotor, or SUMR, turbine, a two-bladed, downwind rotor to test the performance of this lightweight concept.

Although a variety of part traceability solutions are available for traditional manufacturing processes, including bar coding, laser etching and adding serial numbers and radio frequency identification, those technologies are not particularly efficient or effective for additively manufactured parts, which tend to have complex geometries and can be microscale, according to Cody Burke, co-founder and COO of SmartParts. To overcome those challenges, SmartParts reports that it developed an integrated solution that combines advanced material taggants, hardware and software to connect manufacturing data to additive materials and parts.

What we don’t see when turning HTA at a microscopic level is that a heat pocket is being created between the cutting edge and the chip being formed. This heat pocket is preventing coolant from targeting the cutting edge. What HPC does is break through the heat pocket and get coolant to where it needs to be.

For three consecutive quarters, North American robot sales have hit record highs, according to the Association for Advancing Automation in Ann Arbor, Michigan. For CNC machining in particular, orders for automation are “beyond expectations,” said Craig Zoberis, founder and president of Burr Ridge, Illinois-based Fusion | RoboJob-USA, which provides systems for automatically loading and unloading CNC turning and milling machines.

Post-processing operations can be eliminated with System 222. Guhring’s cutting geometries for steel, stainless steel and cast iron are sintered right into the inserts.

In this video Mate’s workholding is at work at Concept Machine Tool in a Yasda PX30i 5-Axis Precision Center showcasing a full 5-Axis surfacing program and cutting demonstration.

Tungaloy America's DeepTri-Drill indexable gundrill series is easy-to-handle and capable of delivering outstanding performance, exceptional efficiency and stability in deep hole drilling.

Dennis Spaeth, publisher of Cutting Tool Engineering, thanks everyone who visited the CTE booth at IMTS and offers website registrants a free CTE baseball cap while supplies last.

Rollomatic SA Chief Product Officer Gert-Jan Hartog shows off the company's smart factory concept featuring a collaborative robot and a smart mobile manipulator, an automated guided vehicle equipped with a six-axis collaborative robot on top.

Kirk Stewart, the chief strategy officer and general manager of sales for SW North America Inc., provides a brief demo of the company's W08-12 machine featuring linear motors, two worktables and a position tolerance of 0.006 mm.

Jeff Badger, Ph.D., a grinding expert and the author of CTE's Grinding Doc column, provides a practical tour of the Truing Parameters Calculator he helped develop along with Rush Machinery and the International Grinding Institute.

Along with a discussion of how VERICUT software helps intelligent cutting tools with optimization, CGTech debuted its CNC Machine Connect system, which features Precheck and Live Monitoring modules.

Jeff Badger, Ph.D., a.k.a. The Grinding Doc, describes his three-day High Intensity Grinding Course, which he developed to provide grinders an in-depth understanding of production grinding along with the knowledge and tools to make significant, long-term improvements to their grinding operations.

Kendal Glotzbach, a regional business manager for Royal Products, discusses two product debuts at IMTS 2022: a new Combo Chuck and the company's new Royal Z-Lock quick-change workholding system.

CTE Publisher Dennis Spaeth interviews Terry Iverson, president and CEO of Iverson & Company, about the latest developments with Champion NOW, the organization he founded to help change perceptions about manufacturing careers.