Product News

igus has introduced a new bearing, drylin W Exchange, for its drylin W linear system in which the liner can be replaced directly on the rail without dismantling the system. By using a practical assembly tool, users can push the old liner out of the housing, clip the new one on to the shaft and push it into the housing for a flush fit. The quick and easy swap of liners will save engineers time and money while maximizing machine up-time.

SCANLAB GmbH announces series production of its high-end excelliSCAN scan system. This scan head proved its suitability for reliable industrial deployment in series micromachining, and has now itself gone into series production. Last but not least, the scan head's built-in intelligence predestines it for integration in automated fabrication environments that leverage Industry 4.0 and IoT (internet of things).

EXAIR's new 303SS Air Jets provide reliable and efficient blowoff and cleaning within corrosive, high temperature or washdown environments. These 1/8 NPT stainless steel air jets replace open tubes and pipe nipples on parts cleaning, drying and cooling operations. With temperature rated up to 400 degrees F, they will produce up to 1.25 pounds of force upon a target.

Walter has introduced the D4140 indexable insert drill, a tough and versatile new drill that delivers enhanced process reliability and extended tool life. The D4140 advantage stems from its design and construction, featuring a hardened and polished surface that offers exceptional resistance to friction wear. The drill’s ground and polished flutes, similar to those of solid-carbide drills, ensure smooth and secure chip evacuation.

In an effort to ensure optimal mill productivity and tooling performance, JM Performance Products Inc. developed its patented Taper Shank Test Fixture to check toolholders and test for taper deformation.

The new Coherent HighLight DL4000HPR is a compact, high power, fiber delivered industrial diode laser system that offers convenience and economy for metal processing applications such as cladding, heat treating and brazing.

igus has developed a new tribo-plastic material for clip and flanged bearings that is highly elastic, chemical resistant and withstands moisture. The wear-resistant material, iglidur K230, will be used in clip and flanged bearings, which are commonly used in the sheet metal industry.

SICK announced the launch of SES/SEM70/90 Motor Feedback Encoders. The SES/SEM70/90 are motor feedback systems offered in 25 mm and 55 mm diameters that use holistic sensing capacitive technology, which makes them unaffected by external influences such as electromagnetic interference and humidity.

Hypertherm is launching Robotmaster V7, a task-based robot programming platform built from scratch on a new architecture. Robotmaster V7 caters to process experts to make robot programming easy and intuitive, even for first-time robot users. This new programming platform builds on the performance of Robotmaster’s offline programming CAD/CAM software that was first introduced in 2002.

OSHA 29 CFR SubPart O 1910.215 for bench grinders is one of the most frequently cited machine-safety standards for violations during OSHA inspections, and one of the most dangerous to ignore. OSHA 1910.215 is a "machine specific" (vertical) regulation with a number of requirements, which if left unchecked, are often cited by OSHA as violations.

The leveling foot castors offered as part of the WDS Component Parts Ltd. range of castors and wheels for trolleys and mobile equipment are designed to allow vertical adjustment so that the supported equipment can be leveled. The range also includes light-, medium- and heavy-duty capacity models, so that virtually all requirements can be met from a single source.

Dillon full-grip jaws, machined from 6061 extruded aluminum, provide added options for full-grip jaw customers who have traditionally used cast aluminum jaws. Available from 5" to 24" in diameter, these jaws can be modified to heights of 10” and provide widths that extend beyond the chuck face diameter.

PI has added a high dynamics model to its range of compact hexapods. Designed for photonics alignment applications, the hexapod provides 6 degrees of freedom, actuator resolution of 5 nanometers and repeatability as good as 60 nanometers, while providing velocities to 20mm/sec. Sustaining loads to 5kg, the new H-811.F2 features a removable magnetic kinematic plate to accelerate workflow with different fiber optics components. Its compact size, large travel range of up to 34mm for linear motions and up to 42° for rotary motions, and a user programmable pivot point facilitate work with fiber optic and photonics components.

A line of CO2 lenses and mirrors for precision engraving and marking lasers that are in stock for OEMs and as field replacements for end-users is available from Laser Research Optics.

Tobii Pro announces a new analytical tool: Tobii Pro VR Analystics, which allows eye-tracking studies to be conducted within 3D virtual reality (VR) environments. The tool integrates into Unity environments and comes with automated features for visualizing and measures what a user sees, their interactions and navigations within a simulated world.

A line of rigid couplings that are ideal for heavy, suspended loads on shafts used in mixers, pumps, fans and related drive systems has been introduced by Stafford Manufacturing Corp.

Engineering components manufacturer WDS Component Parts Ltd. has extended its range of antivibration and rubber stop AV mounts by introducing stainless steel versions of most sizes and types. These are intended for use in applications where corrosion and/or hygiene are issues.

BLM GROUP USA has introduced the LT7, a new generation of Lasertube capable of 3D cutting, to the North American market. Built using over 25 years of laser tube cutting development experience, the LT7 is designed to improve productivity and accuracy through innovations in tube management and handling.

PFERD offers an extensive line of vitrified- and resin-bond mounted points designed to meet an array of application needs for use in both surface and edge grinding. The mounted points can be used on a variety of materials from stainless steel and cast iron to exotic alloys.

For drilling at high feed rates in INOX, tool steels and steel, Inovatools offers the high-performance SC “SpeedMax” drill. With drilling dimensions of 3xD, 5xD and 8xD, the tool specialists cover a wide range of applications.