Titespot angle heads are indexable, allowing multi-position machining with one angle head and set-up, and their compact profile allows machining in bores and cavities not accessible to mechanical heads. Eltool Angle Heads can machine in bores down to 5/8″ in diameter and develop up to 2.5 Horsepower – enough to drill ½” holes through 4140 steel.
Speeders improve surface finish and reduce cycle times when machining small holes and soft materials, without lengthy acceleration ramps. Reducers optimize the lower speed, higher torque requirements of large holes and tough materials without sacrificing horsepower. In-line holders utilize ER style collets and are available on extensions to…
Eltool Corp.'s compact angle head can mill and drill in bores or cavities down to <sup>5</sup>&frasl;<sub>8</sub>" in diameter.
Author:
Larry Adams
Column:
Feature Article
Published:
Column:
Productive Times
Published: