Sharpen Turret Press Tooling FAST!

Published Date
February 01, 2022 - 09:00:am

DCM Tech’s Punch and Die Grinder is a turnkey package with auto-feed control, self-dressing CBN abrasives, through spindle coolant and universal fixturing that accepts Amada, Trumpf, Salvagnini, Finnpower, Weideman, Whitney, and other style tooling. Sharpen large station dies and rooftop/shear angle tooling up to 10 degrees with the standard fixturing package. Typical grind time is less than 5 minutes.

For more information from DCM Tech, click here.

Related Glossary Terms

  • coolant

    coolant

    Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.

  • cubic boron nitride ( CBN)

    cubic boron nitride ( CBN)

    Crystal manufactured from boron nitride under high pressure and temperature. Used to cut hard-to-machine ferrous and nickel-base materials up to 70 HRC. Second hardest material after diamond. See superabrasive tools.

MEDIA

04/24/2024
Join us for an exclusive webinar led by industry veteran Tom Kowalski, Regional Manager for EMUGE-…

03/07/2024
Join us for the pilot episode of Bourbon With The Editor, featuring Erez Speiser, a mechanical…

02/28/2024
Register to watch the recorded webinar on-demand. Join Cutting Tool Engineering for a one-hour…