Cutting Tool Engineering (CTE) is seeking machine shop candidates to be featured in an episode of our new Shop Ingenuity video series, which debuted earlier this year. The series is open to any shop that would like to share its story of shop innovation.
Not sure if your shop should be featured? Check out our first episodes to help you decide:
- A Dream Come True
Ray Tejeda, who owns Dream Tools Inc., talks about the motivation behind his patent-pending Dream Chuck Stop in the third episode of Cutting Tool Engineering's Shop Ingenuity video series. Tejeda demonstrates how his chuck stop provides clearance for cutting tools to machine through a part. - Keep the Spindle Turning
A South Carolina shop purchased extra pallets to cut down on changeover time and ensure that it keeps the spindle turning as much as possible. - Turning back time
In the debut episode of the Shop Ingenuity video series, CTE visits with CNC Supervisor Jeffrey Johnson at Tuttle Manufacturing in Barrington, IL. Johnson set out to improve the production time for a part that the shop has been running every other month for a customer who continues to increase the order each time.
If you think your shop should be featured in the CTE Shop Ingenuity video series, please contact Dennis Spaeth, CTE's electronic media editor, at (847) 714-0176 or dspaeth@jwr.com.
Related Glossary Terms
- chuck
chuck
Workholding device that affixes to a mill, lathe or drill-press spindle. It holds a tool or workpiece by one end, allowing it to be rotated. May also be fitted to the machine table to hold a workpiece. Two or more adjustable jaws actually hold the tool or part. May be actuated manually, pneumatically, hydraulically or electrically. See collet.
- clearance
clearance
Space provided behind a tool’s land or relief to prevent rubbing and subsequent premature deterioration of the tool. See land; relief.
- computer numerical control ( CNC)
computer numerical control ( CNC)
Microprocessor-based controller dedicated to a machine tool that permits the creation or modification of parts. Programmed numerical control activates the machine’s servos and spindle drives and controls the various machining operations. See DNC, direct numerical control; NC, numerical control.
- turning
turning
Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.
Author
Dennis, who served as electronic media editor at Cutting Tool Engineering from January 2007 through May 2018, is now the owner and publisher of the magazine and CTE Publications Inc. Dennis holds a bachelor’s degree in journalism from Northern Illinois University, and has more than 40 years of media experience.
INDUSTRY NEWS
