Tool Coating

No. 807 is a cooling chamber from Grieve, currently used for cooling oven trucks of steel parts at the customer’s facility. Workspace dimensions of this cooling chamber measure 84” W x 96” D x 72” H. 7,000-cfm, 7.5-hp, remote-mounted exhaust blower is used to pull room air through load and exhaust.

No. 828 is a 500° F (260° C), cabinet oven from Grieve, currently used to finish batch loads of metal parts at the customer’s facility.

No. 1042 is a 2000° F (1093° C), gas-fired heavy-duty furnace from Grieve, used for heat treating at the customer’s facility. Workspace dimensions of this furnace measure 30” W x 60” D x 30” H, and 750,000 BTU/HR are installed in four modulating natural gas burners with a floor mounted combustion air blower.

Formulators looking to enhance the corrosion protection of increasingly popular water-based coatings systems can now use Cortec’s M-120, a water-based corrosion inhibitor additive that does not contain heavy metals. M-120 can be used alone or in conjunction with other inhibitors to increase the corrosion protection abilities of both water-based and solvent-based systems. It is recommended for use in acrylic and alkyd resin systems.

No. 934 is an 850° F (454° C), cabinet oven from Grieve, currently used for heat treating at a customer’s facility. Workspace dimensions of this oven measure 38” W x 20” D x 26” H, and 10 KW are installed in Incoloy sheathed tubular heating elements, while a 600-cfm, 1/2-hp recirculating blower provides horizontal airflow to the workload.

No. 1021 is a 1250º F high-temperature belt conveyor oven from Grieve, currently used for drying steel nesh (sieve) materials at the customer’s facility. Workspace dimensions of this oven measure 21” W x 38” D x 3” H, and 40 KW are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a 1600-cfm, 1.5-hp recirculating blower provides vertical downward airflow to the workload.

Nordson Industrial Coating Systems offers Encore nLighten, a safety-approved accessory that instantly adds the power of an LED light to the already impressive capabilities of the Encore manual spray gun. nLighten reduces rework, decreases the material waste, and eliminates the use of unrated flashlights and other light sources that can create hazards for employees in a powder-spraying environment.

No. 1017 is a 1,000º F high-temperature bench oven from Grieve used for various heat processings at the customer’s facility. Workspace dimensions of this oven measure 22” W x 22” D x 13” H, and 3kW are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a recirculating blower provides airflow to the workload.