The Grinding Doc offers insight to a shop worried that it’s wasting abrasive on half-worn electroplated CBN wheels. About the Grinding Doc Video Series: Thanks to his work as an independent grinding consultant and the author of the "Ask the Grinding Doc" column in Cutting Tool Engineering magazine, Dr. Jeffrey Badger routinely receives questions about grinding from shops all over the world. Through the magazine column and this video series, he provides shops with the insight and guidance they seek.
While rotating counterclockwise, the cutting wing on the Erix Tool automatic back spotfacing tool folds in as it cuts a hole, then opens automatically when the spindle passes through the material and begins to rotate clockwise to begin spotfacing.
Milling metals hardened to 52 HRC and harder with solid-carbide cutters doesn’t require a heavy-duty, high-performance machine tool when a machinist employs trochoidal milling and applies cutting tools with an appropriate substrate, coating and geometries.
Northern Tool, a division of Star Cutter Company, Farmington Hills, MI, is well-known for designing and producing special carbide cutting tools, often for automotive powertrain production, that accomplish more than one cutting operation in a single pass.
Episode 64 of the Grinding Doc video series: When pushed to use a tri-grit wheel to cup-wheel grind tungsten carbide sawblade teeth, a shop turned to the Grinding Doc for some guidance. About the Grinding Doc Video Series: Thanks to his work as an independent grinding consultant and the author of the "Ask the Grinding Doc" column in Cutting Tool Engineering magazine, Dr. Jeffrey Badger routinely receives questions about grinding from shops all over the world. Through the magazine column and this video series, he provides shops with the insight and guidance they seek.
Dr. Jeffrey Badger, the host of Cutting Tool Engineering's Grinding Doc Video Series, offers his take on the effectiveness of scrubber nozzles.
About the Grinding Doc Video Series: Thanks to his work as an independent grinding consultant and the author of the "Ask the Grinding Doc" column in Cutting Tool Engineering magazine, Dr. Jeffrey Badger routinely receives questions about grinding from shops all over the world. Through the magazine column and this video series, he provides shops with the insight and guidance they seek.