Home

Trideep

September 06, 2023
Gundrill and Deep Drilling Heads Carrying Inserts with 3 Edges

The TOGT inserts feature 3 chip splitting cutting edges, a positive rake chip breaker and a wiper for high hole surface quality. The new inserts are available in 5 sizes, made from IC908, a versatile PVD coated grade. 

Features

  • The only deep drills with a 3 cutting edged insert (other manufacturers only offer inserts with 1 or 2 cutting edges)
  • Highly accurate peripherally ground insert, provides high hole diameter accuracy of IT10
  • The chip splitter produces narrow chips for efficient chip evacuation, enabling higher feed rates compared to other drills available in the market
  • A wiper on the insert provides extra fine surface finish
  • Direct insert mount - no adjustment needed for accurate hole diameter
  • The drills can carry the new economic solid carbide or the brazed guide pads

Related Glossary Terms

  • feed

    feed

    Rate of change of position of the tool as a whole, relative to the workpiece while cutting.

  • physical vapor deposition ( PVD)

    physical vapor deposition ( PVD)

    Tool-coating process performed at low temperature (500° C), compared to chemical vapor deposition (1,000° C). Employs electric field to generate necessary heat for depositing coating on a tool’s surface. See CVD, chemical vapor deposition.

  • rake

    rake

    Angle of inclination between the face of the cutting tool and the workpiece. If the face of the tool lies in a plane through the axis of the workpiece, the tool is said to have a neutral, or zero, rake. If the inclination of the tool face makes the cutting edge more acute than when the rake angle is zero, the rake is positive. If the inclination of the tool face makes the cutting edge less acute or more blunt than when the rake angle is zero, the rake is negative.

  • wiper

    wiper

    Metal-removing edge on the face of a cutter that travels in a plane perpendicular to the axis. It is the edge that sweeps the machined surface. The flat should be as wide as the feed per revolution of the cutter. This allows any given insert to wipe the entire workpiece surface and impart a fine surface finish at a high feed rate.

Additional Products from Iscar USA

Heli IQ Mill inserts

Iscar inserts suitable for numerous milling applications
Iscar Metals Inc. offers Heli IQ Mill inserts for numerous milling applications across a variety of industrial sectors. The three helical cutting edges reduce cutting forces and power consumption, according to the company. The inserts are now available in cermet for machining medium to hard…

MultiMaster endmills

Iscar Metals Inc. offers the MultiMaster endmills as a complement to its solid-carbide endmill family. A new cutter can be assembled by selecting a milling head, which carries inserts with the required shank diameter, length and shape.

Screw Lock Toolholders for 55-degree Diamond Inserts

Iscar Metals is introducing new SDNCN ...-13-SL and SDJCN ...-13-SL screw lock toolholders for 55-degree diamond inserts with a 7-degree clearance angle.

ECO Inserts

Iscar Metals is introducing new small-sized cost saving inserts. In many turning applications, machinists tend to use larger inserts than are actually required for the machining parameters being applied. To fill the need, Iscar is introducing a wide range of ISOTURN small sized inserts, which…

Tiger-IQ Grooving Tools

The DOVEIQGRIP line from Iscar Metals is an evolution of the successful TIGER wide grooving inserts family.

SD-SP15 Slotting and Groove Milling Cutters

ISCAR is introducing the SD-SP15, a new family of narrow slotting and groove milling cutters, featuring 1.25" diameter milling heads with 8 teeth in a width range of .125" — .250" for maximum depth of cut up to .315".

TANG-GRIP and DO-GRIP Parting Inserts

ISCAR is introducing the IC5400 carbide grade, featuring an effective means of parting and grooving stainless steel.

HGAIR/L and HFAIR/L Face Grooving Adapters

ISCAR is further extending the application range of the current HGAIR/L and HFAIR/L face grooving adapters.

JHP Swissturn Toolholders

ISCAR is expanding the range of SWISSTURN square-shank toolholders by adding new tools for high pressure coolant and also tools without the internal coolant feature.

HM90 ADCT 1505 ...-CF Insert

The chatter or vibration in metal cutting poses an eternal challenge for manufacturers. The ISCAR products of the latest HIGH QLINE family of cutting tools offer an interesting solution: Indexable Milling Insert with an asymmetric shape.