TIGERV Grooving Inserts

June 01, 2011

ISCAR TIGERV heavy-duty grooving inserts with a new chipformer design, ensure better tool security, chip control and ejection in difficult grooving operations on carbon and high-alloy steel even at slow speeds. They also can handle a wider range of applications and operating conditions.

Deep grooves in workpieces especially raise the risk of sudden tool failure, as surface cutting speed declines with radius and the deepening groove makes chip expulsion more uncertain. ISCAR's aggressive new CW chipformer is cup-shaped, pressed right into the TIGERV insert's top face behind the cutting edge. They drastically deform the chip coming off and break it into short open segments for optimal expulsion.

For long service in extreme grooving applications, the insert itself is made of the rugged SUMO TEC grade IC808. ISCAR offers the TIGERV-CW insert in 14 and 17mm widths with center-screw clamping, to fit into a V-lock toolholder with an absolutely flat top surface. The flat-top design ensures unobstructed chip flow, even from the bottom of a deep groove. The new TIGERV-CW grooving insert is recommended for carbon steel and high alloy steel and the original TIGER insert for stainless steel.

Related Glossary Terms

  • cutting speed

    cutting speed

    Tangential velocity on the surface of the tool or workpiece at the cutting interface. The formula for cutting speed (sfm) is tool diameter 5 0.26 5 spindle speed (rpm). The formula for feed per tooth (fpt) is table feed (ipm)/number of flutes/spindle speed (rpm). The formula for spindle speed (rpm) is cutting speed (sfm) 5 3.82/tool diameter. The formula for table feed (ipm) is feed per tooth (ftp) 5 number of tool flutes 5 spindle speed (rpm).

  • flat ( screw flat)

    flat ( screw flat)

    Flat surface machined into the shank of a cutting tool for enhanced holding of the tool.

  • grooving

    grooving

    Machining grooves and shallow channels. Example: grooving ball-bearing raceways. Typically performed by tools that are capable of light cuts at high feed rates. Imparts high-quality finish.

  • toolholder

    toolholder

    Secures a cutting tool during a machining operation. Basic types include block, cartridge, chuck, collet, fixed, modular, quick-change and rotating.

Additional Products from Iscar USA

The ISCAR Chameleon line is back and it’s bigger with a diameter range from 1.3”-1.57”. The new innovative CHAMIQDRILL employs a new insert positioning and locking mechanism that eliminates the need for clamps or screws commonly found on drills for larger diameters. This design allows for easy…

Iscar Metals Inc. offers Heli IQ Mill inserts for numerous milling applications across a variety of industrial sectors. The three helical cutting edges reduce cutting forces and power consumption, according to the company. The inserts are now available in cermet for machining medium to hard…

Iscar Metals Inc. offers the MultiMaster endmills as a complement to its solid-carbide endmill family. A new cutter can be assembled by selecting a milling head, which carries inserts with the required shank diameter, length and shape.

Iscar Metals is introducing new small-sized cost saving inserts. In many turning applications, machinists tend to use larger inserts than are actually required for the machining parameters being applied. To fill the need, Iscar is introducing a wide range of ISOTURN small sized inserts, which…

Iscar Metals is introducing new SDNCN ...-13-SL and SDJCN ...-13-SL screw lock toolholders for 55-degree diamond inserts with a 7-degree clearance angle.

ISCAR is introducing the SD-SP15, a new family of narrow slotting and groove milling cutters, featuring 1.25" diameter milling heads with 8 teeth in a width range of .125" — .250" for maximum depth of cut up to .315".

ISCAR is introducing the IC5400 carbide grade, featuring an effective means of parting and grooving stainless steel.

ISCAR is further extending the application range of the current HGAIR/L and HFAIR/L face grooving adapters.

ISCAR is expanding the range of SWISSTURN square-shank toolholders by adding new tools for high pressure coolant and also tools without the internal coolant feature.

The DOVEIQGRIP line from Iscar Metals is an evolution of the successful TIGER wide grooving inserts family.