Home

JETCROWN

September 06, 2023
JETCROWN

A highly advanced parting system for square TANG-GRIP (TGAQ ) adapters that fit onto a unique crown clamping mechanism with a single screw for fast clamping and indexing. 

Features: 

  • Two coolant through tools with top and bottom outlets for output pressure of up to 340 bars.
    Significantly improves insert tool life.
  • Quick, change fast and easy adapter indexing. User-friendly with a single clamping screw.
  • No set-up time after blade or pocket indexing.
  • Can be used next to the spindle or next to a shoulder as the square adapter and tool shank align with no protrusions.
  • Economical adapters with 4 pockets for TANG-GRIP 2,3- and 4-mm width inserts.
  • Suitable for all TANG-GRIP inserts including high feed inserts. Designed for higher productivity.
  • Extremely stable system improves surface quality and part straightness.
  • Several adapters can be clamped on one tool block.
    Requires a separate crown for each insert width. (Crown to be ordered separately.)
  • Available for parting up to an 82 mm bar diameter.

Related Glossary Terms

  • coolant

    coolant

    Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.

  • feed

    feed

    Rate of change of position of the tool as a whole, relative to the workpiece while cutting.

  • parting

    parting

    When used in lathe or screw-machine operations, this process separates a completed part from chuck-held or collet-fed stock by means of a very narrow, flat-end cutting, or parting, tool.

  • shank

    shank

    Main body of a tool; the portion of a drill or similar end-held tool that fits into a collet, chuck or similar mounting device.

Additional Products from Iscar USA

Sumomill Endmills

A new family of ISCAR endmills extends the benefits of tangential SUMOMILL inserts to chamfering, countersinking and face milling.

PICCO Inserts

ISCAR continues to create fresh solutions for difficult ID machining problems through strategic additions to its popular PICCO family of solid carbide inserts.

Chatterfree Endmills

With a new level of built-in asymmetry, ISCAR EC-H CHATTERFREE solid carbide endmills bring a new level of speed and process security to slotting and shoulder milling of ferrous metals.

PCHPRL Square-Shank Toolholder

ISCAR's new perpendicular toolholder makes it easier to fit PENTACUT 24 grooving and parting tools into overcrowded turrets in high-volume turning operations.

Jet High Pressure Turning Tools

A complete line of standard tools for High Pressure Coolant (HPC) turning from Iscar Metals Inc. puts more efficient turning of titanium, Inconel, and stainless steel within easy reach of any shop. Previously, HPC tooling was available only as a special.

HELITANG UPFEED

A new high-feed milling cutter extends the benefits of ISCAR's HELITANG UPFEED tangential milling cutters to ramping work as well.

HELIDO Profiler Family

ISCAR has expanded its popular line of HELIDO ROUND H400 fine-pitch mills to improve profile machining and ramping over a wider range of applications.

CUT-GRIP Grooving Inserts

ISCAR has launched a line of improved CUT-GRIP grooving inserts for ID grooving that features the N-type chipformer that has proven so effective in OD turning of problematic metals.

HELIDO 845-13

A major expansion of the ISCAR HELIDO 845-13 mill family brings the efficiency and economy of these popular tools to a wider size and application range.

LPGIR Inserts

To meet the growing demand from the energy/powergen sector, ISCAR has launched a line of extra-strength standard grooving tools for more efficient and secure machining of T and L slots so common in turbomachinery.