Home

JETCROWN

September 06, 2023
JETCROWN

A highly advanced parting system for square TANG-GRIP (TGAQ ) adapters that fit onto a unique crown clamping mechanism with a single screw for fast clamping and indexing. 

Features: 

  • Two coolant through tools with top and bottom outlets for output pressure of up to 340 bars.
    Significantly improves insert tool life.
  • Quick, change fast and easy adapter indexing. User-friendly with a single clamping screw.
  • No set-up time after blade or pocket indexing.
  • Can be used next to the spindle or next to a shoulder as the square adapter and tool shank align with no protrusions.
  • Economical adapters with 4 pockets for TANG-GRIP 2,3- and 4-mm width inserts.
  • Suitable for all TANG-GRIP inserts including high feed inserts. Designed for higher productivity.
  • Extremely stable system improves surface quality and part straightness.
  • Several adapters can be clamped on one tool block.
    Requires a separate crown for each insert width. (Crown to be ordered separately.)
  • Available for parting up to an 82 mm bar diameter.

Related Glossary Terms

  • coolant

    coolant

    Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.

  • feed

    feed

    Rate of change of position of the tool as a whole, relative to the workpiece while cutting.

  • parting

    parting

    When used in lathe or screw-machine operations, this process separates a completed part from chuck-held or collet-fed stock by means of a very narrow, flat-end cutting, or parting, tool.

  • shank

    shank

    Main body of a tool; the portion of a drill or similar end-held tool that fits into a collet, chuck or similar mounting device.

Additional Products from Iscar USA

HYDRO-SURE Adapters

ISCAR is introducing unique chucks that combine user-friendly hydraulic clamping with side screw clamping for Weldon type shank tools.

HELIQMILL 390 Milling Tools

ISCAR introduces the ISCAR HELIQMILL 390 line, a new step of development of the insert with helical cutting edge.

HELIDO S890 Facemills

Iscar Metals' HELIDO S890 FSN is a new family of right-hand indexable face mills with an 88°Cutting edge angle (2 degree lead) with 8 helical cutting edges, which can be used for up to 9mm depth of cut.

IC806 Grade

ISCAR is introducing the IC806 — a new complementary SUMO TEC PVD coated grade for machining high temperature alloys, especially Inconel 718.

MINCUT Inserts

ISCAR is expanding the range of MINCUT inserts and tools for face grooving and turning in a diameter range of 10 to 34mm, for up to 9mm grooving depth.

IC6015 and IC6025 Grade

Following the introduction of grade IC6015, ISCAR is introducing an additional new, SUMO TEC CVD coated grade, IC6025, which was developed for machining stainless steel at moderate cutting speeds for stable or unstable conditions.

CHAMGUN Drill

Deep hole drilling is very popular in the automotive, die and mold and aerospace industries. ISCAR took the gundrill technology one step further when developing the new CHAMGUN for deep hole drilling; this is a gundrill that enables the replacement of drilling heads while the driver is still…

TIGERV Grooving Inserts

ISCAR TIGERV heavy-duty grooving inserts with a new chipformer design, ensure better tool security, chip control and ejection in difficult grooving operations on carbon and high-alloy steel even at slow speeds.

Railcar-Wheel Tools

A new family of innovative turning tools from ISCAR raises the threshold for process security in difficult railroad-wheel reconditioning work.

Groove Turn Tools

ISCAR has fine-tuned its workhorse GROOVE TURN cubic boron nitride (CBN) formulation to materially improve rough and finish grooving on hard ferrous materials under a wider range of conditions.