Home

JETCROWN

September 06, 2023
JETCROWN

A highly advanced parting system for square TANG-GRIP (TGAQ ) adapters that fit onto a unique crown clamping mechanism with a single screw for fast clamping and indexing. 

Features: 

  • Two coolant through tools with top and bottom outlets for output pressure of up to 340 bars.
    Significantly improves insert tool life.
  • Quick, change fast and easy adapter indexing. User-friendly with a single clamping screw.
  • No set-up time after blade or pocket indexing.
  • Can be used next to the spindle or next to a shoulder as the square adapter and tool shank align with no protrusions.
  • Economical adapters with 4 pockets for TANG-GRIP 2,3- and 4-mm width inserts.
  • Suitable for all TANG-GRIP inserts including high feed inserts. Designed for higher productivity.
  • Extremely stable system improves surface quality and part straightness.
  • Several adapters can be clamped on one tool block.
    Requires a separate crown for each insert width. (Crown to be ordered separately.)
  • Available for parting up to an 82 mm bar diameter.

Related Glossary Terms

  • coolant

    coolant

    Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.

  • feed

    feed

    Rate of change of position of the tool as a whole, relative to the workpiece while cutting.

  • parting

    parting

    When used in lathe or screw-machine operations, this process separates a completed part from chuck-held or collet-fed stock by means of a very narrow, flat-end cutting, or parting, tool.

  • shank

    shank

    Main body of a tool; the portion of a drill or similar end-held tool that fits into a collet, chuck or similar mounting device.

Additional Products from Iscar USA

Heli IQ Mill inserts

Iscar inserts suitable for numerous milling applications
Iscar Metals Inc. offers Heli IQ Mill inserts for numerous milling applications across a variety of industrial sectors. The three helical cutting edges reduce cutting forces and power consumption, according to the company. The inserts are now available in cermet for machining medium to hard…

MultiMaster endmills

Iscar Metals Inc. offers the MultiMaster endmills as a complement to its solid-carbide endmill family. A new cutter can be assembled by selecting a milling head, which carries inserts with the required shank diameter, length and shape.

Screw Lock Toolholders for 55-degree Diamond Inserts

Iscar Metals is introducing new SDNCN ...-13-SL and SDJCN ...-13-SL screw lock toolholders for 55-degree diamond inserts with a 7-degree clearance angle.

ECO Inserts

Iscar Metals is introducing new small-sized cost saving inserts. In many turning applications, machinists tend to use larger inserts than are actually required for the machining parameters being applied. To fill the need, Iscar is introducing a wide range of ISOTURN small sized inserts, which…

HGAIR/L and HFAIR/L Face Grooving Adapters

ISCAR is further extending the application range of the current HGAIR/L and HFAIR/L face grooving adapters.

JHP Swissturn Toolholders

ISCAR is expanding the range of SWISSTURN square-shank toolholders by adding new tools for high pressure coolant and also tools without the internal coolant feature.

Tiger-IQ Grooving Tools

The DOVEIQGRIP line from Iscar Metals is an evolution of the successful TIGER wide grooving inserts family.

SD-SP15 Slotting and Groove Milling Cutters

ISCAR is introducing the SD-SP15, a new family of narrow slotting and groove milling cutters, featuring 1.25" diameter milling heads with 8 teeth in a width range of .125" — .250" for maximum depth of cut up to .315".

TANG-GRIP and DO-GRIP Parting Inserts

ISCAR is introducing the IC5400 carbide grade, featuring an effective means of parting and grooving stainless steel.

HM90 ADCT 1505 ...-CF Insert

The chatter or vibration in metal cutting poses an eternal challenge for manufacturers. The ISCAR products of the latest HIGH QLINE family of cutting tools offer an interesting solution: Indexable Milling Insert with an asymmetric shape.