Expanded AR Endmills

Contact Details

LMT Onsrud LP
Address
1081 S. Northpoint Blvd.
Waukegan
60085
IL
United States
Phone
847-362-1560
Toll Free Phone
800-234-1560
Fax
800-557-6720

42.3401787, -87.8882648

July 02,2018
Expanded AR Endmills

LMT Onsrud has expanded its line of AR endmills designed to provide exceptional performance and tool life within aluminum and nonferrous roughing applications.

Available in 2- and 3-flute configurations, coolant or non-coolant through, these tools provide high material-removal rates and are optimized to slot 30 percent faster than our standard AF Series tooling. The coolant-through design directs coolant directly at the cutting edge aiding in removing chips and heat, even during the deepest pocketing applications.

LMT Onsrud’s expanded AR series product offering incorporates a greater number of diameters and lengths of cuts.

Related Glossary Terms

  • coolant

    coolant

    Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.

Additional Products from LMT Onsrud LP

LMT Onsrud LP is launching a new endmill series designed to meet the toughest challenges of machining Inconel and other nickel-based materials. The new MXR series has been engineered for heavy profiling allowing for 15 percent radial engagement during machining.
LMT Onsrud LP is launching a new endmill series designed to meet the toughest challenges of machining Inconel and other nickel-based materials. Configured in 7-, 9- or 11-flute options, the HXR series endmill line delivers fast material-removal rates and has been developed for low radial and higher Read More
LMT Onsrud is offering its innovative compression tooling technology within its new line of high-speed steel dor-bits.
As a leader in compression spiral tooling, LMT Onsrud has expanded its product offering on two of its most popular compression tooling lines: the Polaris and Marathon Compressions.
LMT Onsrud LP launched and significantly expanded its offerings in seven key product series. Included in the expansion are key introductions in DFC routers, solid-carbide endmills and PCD engravers.
LMT Onsrud LP offers a three flute and four flute cutting tool (54-200 series) specifically designed to easily machine some of the most challenging and abrasive characteristics inherent to glass-reinforced plastic (GRP).
LMT Onsrud LP introduces the latest addition to its comprehensive line of chip control technology with the Progressive Chipbreaker (67-220 series) tooling for composite materials.
LMT Onsrud LP offers a drill for CFRP (Carbon Fiber-Reinforced Plastic) to prevent fraying and delamination.
LMT Onsrud LP introduces a new series to its high-performance endmill offering; endmills for steel and cast iron.
LMT Onsrud LP introduces a new cutting tool to machine composite materials.