Rough start

Published Date
November 05,2013 - 10:30:am

A shop using electroplated grinding wheels observed a horrible surface finish on the first several parts produced by a new wheel. Though the surface finish gradually improves, the shop turned to the Grinding Doc for a solution to the problem.

Dr. Jeffrey Badger, the host of Cutting Tool Engineering's Grinding Doc Video Series, takes a look at the problem in the 46th episode of the video series.

About the Grinding Doc Video Series: Thanks to his work as an independent grinding consultant and the author of the "Ask the Grinding Doc" column in Cutting Tool Engineering magazine, Badger routinely receives questions about grinding from shops all over the world. Through the magazine column and this video series, he provides shops with the insight and guidance they seek.

For more information about the Grinding Doc, visit his website here.

Related Glossary Terms

  • grinding

    grinding

    Machining operation in which material is removed from the workpiece by a powered abrasive wheel, stone, belt, paste, sheet, compound, slurry, etc. Takes various forms: surface grinding (creates flat and/or squared surfaces); cylindrical grinding (for external cylindrical and tapered shapes, fillets, undercuts, etc.); centerless grinding; chamfering; thread and form grinding; tool and cutter grinding; offhand grinding; lapping and polishing (grinding with extremely fine grits to create ultrasmooth surfaces); honing; and disc grinding.