With the WPP10G, WPP20G and WPP30G grades, Walter presents the new Tiger·tec® Gold indexable inserts, specially designed for turning operations. The multi-layered, highly textured MT-TiCN Tiger·tec® Gold coating increases tool life by an average of 50%.
For more information from Walter USA about these insert grades, click here.
Related Glossary Terms
- turning
turning
Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.
MEDIA
