Mazak HQR-250MSY Multi-Tasking Turning Center

Published Date
November 11, 2019 - 03:15:pm

The Mazak HQR-250MSY Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume throughput. Watch as it demonstrates its ability to machine parts complete – from raw material to finished part – in a single setup.

Learn more about this highly productive machine here: https://www.mazakusa.com/machines/hqr-250msy/

Related Glossary Terms

  • turning

    turning

    Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.

MEDIA

04/24/2024
Join us for an exclusive webinar led by industry veteran Tom Kowalski, Regional Manager for EMUGE-…

03/07/2024
Join us for the pilot episode of Bourbon With The Editor, featuring Erez Speiser, a mechanical…

02/28/2024
Register to watch the recorded webinar on-demand. Join Cutting Tool Engineering for a one-hour…