Oberg expands equipment and capacity

Published
August 13, 2015 - 07:00pm

Contract manufacturer Oberg Industries, Freeport, Pa., has invested in new equipment to expand its production of medium and large machined components and assemblies. 

The most recent additions include a 60"-travel horizontal mill with 5-axis capability and a heavy-duty, 2-axis turning center capable of turning parts up to 120" long and 36" in diameter. Oberg's medium-to-large manufacturing equipment will be used for products such as aircraft structure and engine parts, downhole drill string components and hydraulic control assemblies.

Related Glossary Terms

  • milling machine ( mill)

    milling machine ( mill)

    Runs endmills and arbor-mounted milling cutters. Features include a head with a spindle that drives the cutters; a column, knee and table that provide motion in the three Cartesian axes; and a base that supports the components and houses the cutting-fluid pump and reservoir. The work is mounted on the table and fed into the rotating cutter or endmill to accomplish the milling steps; vertical milling machines also feed endmills into the work by means of a spindle-mounted quill. Models range from small manual machines to big bed-type and duplex mills. All take one of three basic forms: vertical, horizontal or convertible horizontal/vertical. Vertical machines may be knee-type (the table is mounted on a knee that can be elevated) or bed-type (the table is securely supported and only moves horizontally). In general, horizontal machines are bigger and more powerful, while vertical machines are lighter but more versatile and easier to set up and operate.

  • turning

    turning

    Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.

INDUSTRY NEWS

06/21/2024
Sandvik Coromant is expanding operations in Oconee County, South Carolina. The $29.4 million investment will improve the company’s Westminster production facility.

06/20/2024
“Why do we do what we do?” asked Alexander Zoller, president of ZOLLER Inc., during his welcome and keynote address on the first day of the two-day ZOLLER Open House & Technology Days, which took…

06/13/2024
Shipments of cutting tools, measured by the Cutting Tool Market Report compiled in a collaboration between AMT – The Association For Manufacturing Technology and the U.S. Cutting Tool Institute (…