Finishing

Abrasive stones commonly found in machine shops are fine for run-of-the-mill deburring and abrading, but absolutely not suitable for precision stoning. For that, you need a pair of carefully prepared, precision-ground flat stones.

Productive Times Article. END USER:  Wolfram Manufacturing, (512) 600-3220, www.wolframmfg.com. SOLUTION PROVIDER: Brush Research Manufacturing Co. Inc., (323) 261-2193, www.brushresearch.com. CHALLENGE: Perform finishing operations during the machining process. SOLUTION: Tool with small, abrasive globules that are permanently mounted to flexible filaments.

Most manufacturers finish their sintered ceramic parts with grinding equipment designed for metals. Tratech Corp., however, has introduced what it says is the first commercially available CNC grinding machine designed specifically for the demanding needs of machining fully sintered ceramics.

Honing, grinding and lapping are the primary finishing processes used in most shops, and honing may be the most capable and underutilized of the three operations.

END USER: RDC Control Ltd., (800) 363-2264, www.rdccontrol.com. SOLUTION PROVIDER: Rösler Metal Finishing USA LLC, (269) 441-3000, www.rosler.us. CHALLENGE: Reduce the cost and time to finish end plates for hydraulic cylinders. SOLUTION: A shot-blasting machine to perform the process in-house.

Finishing hardened workpieces on multitask machines that provide grinding and hard turning and/or hard milling capabilities can prove beneficial.

Pristine finishes are pivotal for safe and effective orthopedic implants.

Shops have many choices when texturing—rather than smoothing—part surfaces.