Videos

12/02/2023
Haimer USA Vice President of Sales Steven Baier demonstrates the use of the company's Vio Linear tool presetter during Westec 2023 held in Long Beach, California, in November.
12/02/2023
Matt Silva, Allied Machine & Engineering's field sales engineer for Southern California, highlights the company's Wohlhaupter boring system as well as a range of other products on display at the Allied booth during Westec 2023 held in Long Beach, California, in November.
12/01/2023
Iscar introduces a new range of mini SWISSGRIP tools for Swiss-Type Machines with .024” to .047” wide inserts for economical parting of Ø.394-Ø.629” bars.
11/01/2023
Maximizing cost savings and improving product quality are two of the most critical objectives for machining operations. An effective way to achieve these goals is real-time monitoring of production process quality. The Marposs WRSP60 scanning probe measures the profile and surface of newly worked parts quickly and accurately. The tool can automatically define critical measurements like TIR, roundness, and concentricity for rounded parts with a remarkable repeatability of 0.4 microns. Equipped with radio data transmission, the WRSP60 integrates perfectly in lathes and machining centers.
11/01/2023
NSK America introduces CTS-3030, the first high-speed ultra-precision spindle that seamlessly transports coolant through the cutting tool, resulting in superior hole quality and increased productivity. The CTS-3030 Spindle allows for smaller, more manageable chips for better chip flow, spindle accuracy within 1 Micron and eliminates the need for secondary drilling operations.
10/26/2023
Join Cutting Tool Engineering for a one-hour grinding webinar based on the "Diamond in the Wheel" feature article published in the October 2023 issue of CTE magazine. Authored by Thomas Namola and Jeremiah Wolf — product development and applications engineers at Abrasive Technology LLC — the article discusses the use of optimized single-layer diamond tools for cutting and shaping natural fiber-reinforced composite material. Namola and Wolf recap the article and take questions from webinar attendees.
10/01/2023
ISCAR recently expanded the application range of barrel-shaped endmills with new radial segment sizes. A broad range of “Barrel-Shaped” tools is now available including oval-profile barrel endmills intended for advanced semi-finish and finishing operations of 3D surface applications.
09/29/2023
Sold by Germany-headquartered Chiron Group, the refrigerator-size Micro5 machining center is designed to machine small and delicate parts for industries like medical, jewelry, watchmaking and electronics. The five-axis machine  can handle workpiece sizes up to 50 mm x 50 mm x 50 mm.
09/29/2023
ZOLLER Inc. welcomed manufacturing professionals from a range of industry verticals to its North American headquarters in Ann Arbor, Michigan, for Automation Days on Aug. 9 and 10, 2023. Customers and industry leaders highlighted the unique solutions ZOLLER offers to automate cutting tool management and establish more resilient, reliable processes in the face of a labor shortage that is expected to leave 2.1 million jobs unfilled by 2030.
09/29/2023
This 5-minute video report on Eagle Manufacturing, a student-run business at Brown County High School in Nashville, Indiana, is presented as a video supplement to the following Lead Angle column published in the October 2023 issue of Cutting Tool Engineering magazine.
09/01/2023
Whether it is groove turning holders and grooving systems for radial grooving, parting off, axial grooving and internal grooving, indexable inserts with new parting-off or groove turning geometries or tailored cutting tool materials and coatings, etc. — the comprehensive range of Walter parting-off tools enables you to achieve top performance.
08/24/2023
The webinar, which is based on the "Tiny Drillers" feature published in the August issue of Cutting Tool Engineering magazine, delves deeper into the products and strategies recommended for deep-hole microdrilling by Kennametal Inc. and Sandvik Coromant Co. In addition, a representative from MAQ AB discussed the company's vibration-damped turning tool that is 8 mm in diameter, which was the subject of a sidebar to the main feature article in CTE's August issue.
08/01/2023
This Fixtureworks video highlights the innovative Modular Pull Clamping System, a simple clamping system that allows 5-axis machining without tool interference. The innovative pull clamps can be used as a mechanical zero-point clamping system for quick fixture change with locating repeatability of 5 microns.
08/01/2023
Not all titanium is alike. Depending on whether it is pure titanium or alloyed titanium, the chip removing process behavior differs. For these challenges, Mikron Tool has developed drills tailored to specific titanium grades that can machine titanium safely — with higher cutting performance results, longer tool lives and excellent hole quality. The webinar, which is presented by Clive Komlenic, sales director, East, for Mikron Tool, addresses chip formation, torque, material properties, overheating and Mikron’s latest state-of-art drill series technologies aimed at machining titanium.
08/01/2023
Tungaloy’s DrillMeister and AddMeisterDrill lines of head-changeable drills offer stable performance, long tool life, with significant cost-savings thanks to the elimination of tool reconditioning and reduced inventory. Our new modular drill body, combined with the TungFlex system, ensures increased reliability of long-reach drilling for hole depths up to 3xD.
07/14/2023
Steven Baier, vice president of sales for Haimer USA, demonstrated a couple of heat-shrink machines during Eastec 2023: the Power Clamp Premium i4.0 and the Power Clamp Air i4.0 Economic.
07/14/2023
During a tour of the NSK America booth at Eastec 2023, Senior Product Manager Greg Nottoli showcased the company's CTS-3030 high-speed, ultra-precise electric spindle designed to seamlessly transport coolant through the cutting tool.
07/14/2023
ARCH Cutting Tools Marketing Director Rachel Dresser took time during Eastec 2023 to highlight the company's product series for KEO, Ultra-Dex, Patriot High Performance, and Revere, as well as its RECON360 remanufacturing service.
07/10/2023
Rollomatic Inc.'s Brian Twohey, national sales manager, highlighted a couple of machines while at Eastec: the GrindSmart 660XW, a six-axis tool and cutter grinder, and the Strausak ONE linear CNC tool grinder.
07/06/2023
Marubeni Citizen-Cincom Sales Engineer James Sabatino took a few minutes at Eastec 2023 to showcase the Cincom L32 XII Swiss-type CNC automatic lathe that features nine cutting axes and an automatic toolchanger.