Videos

Larry Marchand, vice president of the Profile Grinding Technologies Division at United Grinding Technologies, provides a brief look at the company's Magerle MFP 50, which features an automatic tool changer that enables grinding, milling and drilling in one setup.

Dr. Jeffrey Badger, host of Cutting Tool Engineering magazine's Grinding Doc Video Series, helps a shop determine an appropriate material-removal rate in the 33rd episode of the video series.

Ron Sattler of Chemetall Inc. presents a Fast Track Seminar at the Cutting Tool Engineering booth during IMTS 2010. His presentation, titled "The Application of Sustainability in Metalworking Processes," is divided into two parts. Presented here is part two.

Ron Sattler of Chemetall Inc. presents a Fast Track Seminar at the Cutting Tool Engineering booth during IMTS 2010. His presentation, titled "The Application of Sustainability in Metalworking Processes," is divided into two parts. Presented here is part one.

Exechon AB, Sollentuna, Sweden, highlights the tripod technology and parallel kinematics of the Tripod 700S Powerflex 6-axis machining center, which Hydromat Inc. introduced to the North American market at IMTS 2012.

Introduced at IMTS 2012, EMAG L.L.C.'s VL 2 P machining system with pendular technology gets its nickname, "The Nebenzeit Killer," from its reported ability to kill idle time.

Perplexed by the lack of automation for vertical machining centers, Steve Simons, president of Simons Design Innovation, decided to do something about it.

Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, discusses the importance of grit size in the 32nd episode of the video series.

Presented as an online supplement to Cutting Tool Engineering's August 2012 report on "New Life for Old Iron," the following video offers a look at several examples of machines retrofitted by Machines in Motion Inc. with the help of Centroid CNC controls, Yaskawa drives and motors, Magnescale positioning scales, and Atrump CNC machinery.

Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, fields a question from a shop truing its diamond wheels offline, then remounting them onto the non-tapered spindle without using an adapter. The shop wondered whether its tight wheel tolerances negate the need for an adapter in the 31st episode of the video series.

Presented as an online supplement to Cutting Tool Engineering's July 2012 report on high-speed milling, the following video from the RobbJack Corp., Lincoln, Calif., demonstrate a variety of high-speed milling operations.

Presented as an online supplement to Cutting Tool Engineering's June 2012 report on "Replacement Parts," CTEplus offers a closer look at some of the superabrasive tools and technology offered by Abrasive Technology Inc., Lewis Center, Ohio.

Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, offers an overview of his Grinder's Toolbox for those who have grown weary of shop floor calculations.

A shop turned to Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, to find out whether rotating the dressing diamond is really necessary. Check out his response in the 29th episode of the video series.

Knight Carbide recently issued this animated case study involving the production of a custom part radius for a hollow mill operation. The objective was to eliminate bird nesting, reduce machine down time and increase performance.<br><br>View Knight Carbide's animated case study below.

Amada Machine Tools demonstrated its new S-10 modular multitask machine during a recent press briefing at its Technical Center in Schaumburg, Ill.

During rotary plunge dressing, a shop worker would like to know if dwelling for 2 seconds is the right amount of time. Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, says it's not a matter of time.

A Makino Machining Complex integrated with two a71 horizontal machining centers is used to produce conveyor chain assemblies for the coal mining industry in this video report shot at Cincinnati Mine Machinery.

Making parts for hydraulic fracturing equipment presents opportunities but requires the right tools, as noted in the cover story of the March 2012 issue of Cutting Tool Engineering magazine.

Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, offers some personal preferences in regard to grinding books and literature that could prove useful on the shop floor. Watch the 27th episode of the video series now.