Videos

Len Graham, Business Unit Leader, Rexam Mold Manufacturing, discusses the motivation behind the Buffalo Grove, Ill., company's decision to build a Mega Cell automated mold manufacturing system. Graham offers a detailed walk-through of the company's Mega Cell, which began operation in March 2013.

Producing prototype automotive parts via 3D printing helps reduce time to market while boosting vehicle quality and fuel efficiency.

For the 44th episode of the Grinding Doc Video Series, a shop recently asked Dr. Jeffrey Badger, Cutting Tool Engineering magazine's Ask the Grinding Doc columnist, to settle an argument about the best way to run the dresser when rotary plunge diamond dressing aluminum-oxide wheels.

Video report features the Form 20 sinker EDM machine, the Mikron HSM 400U LP 5-axis milling machine, and the Cut 300 Sp and Cut 200 mS wire EDM machines.

Element Six, which consolidated its four R&D centers spread around the world into one 60,000-sq.-ft. facility now known as its Global Innovation Centre in Harwell, U.K., offers a video tour of the new facility.

Thomas W. Malone, a professor at the Massachussetts Institute of Technology Sloan School of Management, suggests in the latest Sandvik Coromant "Looking Ahead" video series that recognizing and rapidly responding to change will be critical to the success of any company in tomorrow's business environment.

Coherent Inc. demonstrates its HighLight D-Series direct-diode laser for heat treating.

For the 43rd episode Cutting Tool Engineering magazine's Grinding Doc Video Series, Dr. Jeffrey Badger helps a shop having trouble getting its CBN wheel to open up before it burns the first few hardened steel parts, which then must be scrapped.

Join United Grinding Technologies for an in-depth look at cylindrical match grinding in an on-demand Webinar that addresses the need for match grinding, the principles behind match grinding, as well as the advantages and disadvantages of the process.

In it's second Looking Ahead video, Sandvik Coromant gathered industry experts to talk about talent mismatch, employment outsourcing and the age of hyper-specialization.

Tim Espy, plant manager at V W Broaching Service Inc., Chicago, provides the play-by-play as an internal spline is created on a 24" dia. ball valve for a water utility. The broaching shop uses a Colonial horizontal broaching machine to produce the spline in the stainless steel valve in just a few seconds.

Jakob Antriebstechnik, a spindle manufacturer in Germany, recently demonstrates its Motor Spindle Safety System, which is said to prevent major damage when spindle collisions occur.

Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, addresses how appearances can be deceiving for shops engaging in traverse disc grinding in the 42nd episode of the video series.

An Iscar ¼ " solid-carbide FINISHED endmill reduced cycle time from more than 6.5 hours to 8 minutes when slotting an A-36 steel oil pan at SFI.

Are diamonds a machine shop's best friend? Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, takes a close look at the question in the 41st episode of the video series.

Blue Wave Ultrasonics Sales Director Jeff Hancock demonstrates the ultrasonic cleaning process and explains the relationship between ultrasonic pressure waves and microscopic cavitation bubbles working in an aqueous solution. Blue Wave, which is located in Davenport, Iowa, provided the video as a video supplement to "Clean Sounds," a feature article published in the May 2013 issue of Cutting Tool Engineering magazine.

Dr. Jeffrey Badger, the host of Cutting Tool Engineering magazine's Grinding Doc Video Series, helps a shop that's getting cracking at the corner radius of a tungsten-carbide part in the 40th episode of  the video series.

Kennametal shows a side-by-side comparison of its KM-Micro/Mini quick-change system versus a standard tool in this 2-minute demonstration, courtesy of Kennametal. While the KM-Micro/Mini tool change is complete in just half a minute, the standard tool requires 2 minutes to change, set up and gage the tool.

In this 2-minute side-by-side comparison, Kennametal shows its KM-Micro/Mini tool being changed in just half a minute versus a standard tool requiring 2 minutes to change, set up and gage.

A shop experiencing on-again, off-again waviness issues during cylindrical OD grinding operations asks Dr. Jeffrey Badger why the problem comes and goes in the 39th episode of Cutting Tool Engineering magazine's Grinding Doc Video Series. Badger, the host of video series, provides some insight.