Evaluating coolants

Published Date
June 21, 2014 - 06:45:pm

A coolant supplier having trouble getting customers to try a new product turned to Dr. Jeffrey Badger, the host of Cutting Tool Engineering's Grinding Doc Video Series, for some insight into how the supplier could convince shops to change coolant.

About the Grinding Doc Video Series: Thanks to his work as an independent grinding consultant and the author of the "Ask the Grinding Doc" column in Cutting Tool Engineering magazine, Dr. Jeffrey Badger routinely receives questions about grinding from shops all over the world. Through the magazine column and this video series, he provides shops with the insight and guidance they seek.

For more information about the Grinding Doc, visit his website here.

Related Glossary Terms

  • coolant

    coolant

    Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.

  • grinding

    grinding

    Machining operation in which material is removed from the workpiece by a powered abrasive wheel, stone, belt, paste, sheet, compound, slurry, etc. Takes various forms: surface grinding (creates flat and/or squared surfaces); cylindrical grinding (for external cylindrical and tapered shapes, fillets, undercuts, etc.); centerless grinding; chamfering; thread and form grinding; tool and cutter grinding; offhand grinding; lapping and polishing (grinding with extremely fine grits to create ultrasmooth surfaces); honing; and disc grinding.

MEDIA

11/08/2024
The Chief Technical Officer of Tungaloy-NTK shares insights on the company's advancements in…

10/30/2024
Join David Goulbourne, presenter from Sandvik Coromant, as he walks us through the Sandvik Coromant…

10/30/2024
Join Tod Petrik at the HAIMER booth at IMTS 2024 for an exclusive tour of HAIMER’s newest tools and…