Maximize the Value of Your Metal Scrap and Cutting Fluids

Published Date
March 05,2019 - 08:45:am

The PRAB E-Series Chip Processing System is a dependable, fully automated system for turnings volume reduction and solid-liquid separation of small to medium volumes of flowable chips. This compact, skid mounted system produces 98% dry chips, and when coupled with a Guardian™ Coolant Recycling system, cutting fluid waste is reduced up to 90%, providing a fast return on investment. Delivered ready to go for processing aluminum, brass, cast iron, steel, and more. Watch it work in this 2-minute video animation.

For more information visit PRAB at PRAB E-Series Chip Processing System

Related Glossary Terms

  • coolant

    coolant

    Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.

  • cutting fluid

    cutting fluid

    Liquid used to improve workpiece machinability, enhance tool life, flush out chips and machining debris, and cool the workpiece and tool. Three basic types are: straight oils; soluble oils, which emulsify in water; and synthetic fluids, which are water-based chemical solutions having no oil. See coolant; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.