IMTS Partner Video with Autodesk's Inventor HSM Express and SwiftCARB

Published Date
July 26,2021 - 01:45:pm

Related Glossary Terms

  • coolant

    coolant

    Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.

  • inches per minute ( ipm)

    inches per minute ( ipm)

    Value that refers to how far the workpiece or cutter advances linearly in 1 minute, defined as: ipm = ipt 5 number of effective teeth 5 rpm. Also known as the table feed or machine feed.

Watch 2D Adaptive clearing paired with SwiftCARB's coolant through AV series Rampmill rip through aircraft grade aluminum @ 375 IPM on a Haas VF2-SS.  All of our tools are proudly made in the USA.