USCTI launches new website

Published
March 15, 2016 - 07:00pm

The United States Cutting Tool Institute (USCTI), the leading trade association for the North American cutting tool industry, is pleased to announce the launch of its new Website, http:www.uscti.com. The redesigned website is mobile-friendly, and with simplified navigation, makes it easier to find membership information, technical resources, benefits of USCTI membership and a comprehensive membership directory.

USCTI members represent ten product divisions (Carbide Tooling, Drill & Reamer, Metal Cutting Saw Blades, Milling Cutter, Polycrystalline Diamond & Polycrystalline Cubic Born Nitride (PCD & CBN), Substrate Materials, Surface Coating, Tool Holder and All Other Tooling). The site has been designed to easily identify the types of products member companies manufacture.

The Website includes monthly press releases highlighting U.S. cutting tool consumption and is a great resource to learn more about upcoming meetings, USCTI sponsors and the resources that are available in the Technical Resource Center. For those companies interested in membership in USCTI, with the newly designed navigation, membership information is a click away.

Related Glossary Terms

  • gang cutting ( milling)

    gang cutting ( milling)

    Machining with several cutters mounted on a single arbor, generally for simultaneous cutting.

  • milling

    milling

    Machining operation in which metal or other material is removed by applying power to a rotating cutter. In vertical milling, the cutting tool is mounted vertically on the spindle. In horizontal milling, the cutting tool is mounted horizontally, either directly on the spindle or on an arbor. Horizontal milling is further broken down into conventional milling, where the cutter rotates opposite the direction of feed, or “up” into the workpiece; and climb milling, where the cutter rotates in the direction of feed, or “down” into the workpiece. Milling operations include plane or surface milling, endmilling, facemilling, angle milling, form milling and profiling.

  • milling cutter

    milling cutter

    Loosely, any milling tool. Horizontal cutters take the form of plain milling cutters, plain spiral-tooth cutters, helical cutters, side-milling cutters, staggered-tooth side-milling cutters, facemilling cutters, angular cutters, double-angle cutters, convex and concave form-milling cutters, straddle-sprocket cutters, spur-gear cutters, corner-rounding cutters and slitting saws. Vertical cutters use shank-mounted cutting tools, including endmills, T-slot cutters, Woodruff keyseat cutters and dovetail cutters; these may also be used on horizontal mills. See milling.

  • polycrystalline diamond ( PCD)

    polycrystalline diamond ( PCD)

    Cutting tool material consisting of natural or synthetic diamond crystals bonded together under high pressure at elevated temperatures. PCD is available as a tip brazed to a carbide insert carrier. Used for machining nonferrous alloys and nonmetallic materials at high cutting speeds.

  • reamer

    reamer

    Rotating cutting tool used to enlarge a drilled hole to size. Normally removes only a small amount of stock. The workpiece supports the multiple-edge cutting tool. Also for contouring an existing hole.

  • sawing machine ( saw)

    sawing machine ( saw)

    Machine designed to use a serrated-tooth blade to cut metal or other material. Comes in a wide variety of styles but takes one of four basic forms: hacksaw (a simple, rugged machine that uses a reciprocating motion to part metal or other material); cold or circular saw (powers a circular blade that cuts structural materials); bandsaw (runs an endless band; the two basic types are cutoff and contour band machines, which cut intricate contours and shapes); and abrasive cutoff saw (similar in appearance to the cold saw, but uses an abrasive disc that rotates at high speeds rather than a blade with serrated teeth).

INDUSTRY NEWS

07/11/2024
Shipments of cutting tools, measured by the Cutting Tool Market Report compiled in a collaboration between AMT – The Association For Manufacturing Technology and the U.S. Cutting Tool Institute (…

07/08/2024
EXAIR, a leader in engineered compressed air solutions and static elimination, and BETE, an engineered spray nozzle and spraying systems manufacturer, have entered into a definitive merger agreement…

07/05/2024
In the ever-evolving landscape of tramp oil contamination, the choice between belt skimmers and tube skimmers has sparked ongoing debates, with advocates on each side passionately championing the…